Cloud Connoisseur Glass

[delta hotel]

Mine arrived last night and tried with B2 with Shovelhead bowl. Water an inch from top of base. Got very high but need to dial in devices and water levels.

I'm using my B-1 on it with about the same amount of water. I may have to try my B-2, it's more restrictive, and this being 18mm, it might change it up some. It's something to try other than adding more water. I think the water's right about where it is for me, but it's still a little too much volume. I could add some water, but I don't like dumping out that much water so often. Luckily, or unluckily for me, I'm often bad about changing my water when I should, so maybe in reality it's not really THAT often. Also getting the last little bit of water out when dumping it can be a little tricky due to it's shape.

I'm still liking it very much though, I just need to dial in the water level a little more. I've got an 18mm drop down on the way that I hope fits. It's a great piece other than taking a little too much water to fill for me, and that's just personal preference.

 

[iDRINKBLEACH]

Hey every body!
Life has been super crazy for me lately with a move I’m still in the middle of, most of it is done thankfully. With all this going on I have been more distant on social media, with applying my time where it’s most needed.

Prodigy is in stock and I will list the few I have in very soon, a long with glass bowls. I just need to make sure every one who was in is taken care of first.

Project Prophet has begun again with more info becoming available very soon.

 

[dimmusp]

@iDRINKBLEACH Any chance of a "Mini Prodigy" in the future?
It sounds like most people think that the volume can be a bit too large unless you fill it with a lot of water.

 

[iDRINKBLEACH]

@iDRINKBLEACH Any chance of a "Mini Prodigy" in the future?
It sounds like most people think that the volume can be a bit too large unless you fill it with a lot of water.

Yes sir. Dry rig is coming first. I have my price set and pre order deal in mind, then Protégé release. 30% smaller than prodigy with carb plumbed into the downstem. Shooting for July-august for it

 

[Texus]

Yes sir. Dry rig is coming first. I have my price set and pre order deal in mind, then Protégé release. 30% smaller than prodigy with carb plumbed into the downstem. Shooting for July-august for it

All sound like good ideas.

 

[Razhumikin]

I have been absolutely loving my Prodigy since I've gotten it on Monday. It has been an incredible partner to my new GTR, and Ive been taking giant hits with the two of them all week. However, because I've been having so much fun, cleaning time is now fast approaching, and I'm feeling a little mystified about how to best get it done. Has anyone cleaned this thing without just using a gallon of ISO?

 

[iDRINKBLEACH]

I have been absolutely loving my Prodigy since I've gotten it on Monday. It has been an incredible partner to my new GTR, and Ive been taking giant hits with the two of them all week. However, because I've been having so much fun, cleaning time is now fast approaching, and I'm feeling a little mystified about how to best get it done. Has anyone cleaned this thing without just using a gallon of ISO?

I use just a lil bit about an inch maybe a lil less on the bottom with a decent amount of fine salt. Poured down the downstem, usually that is enough to clean up the downstem since it’s mainly dry debris. Then rinse with piping hot water. It cleans up fairly easy. I also use silicone plugs so I can turn upside down and whatnot, let’s me get more use of less alcohol with all my glass cleaning.

 

[Easywider]

My cleaning process is about the same. I usually pour about 3/4cup of warmed iso through the down stem ( plug and shake ) then the iso gets poured back into a container for re-use. Run some hot water through followed by a vinegar rinse. I've also had great success with PBW after a combustion incident or two.

 

[iDRINKBLEACH]

Prophet dry rig, for those who prefer dry vapor but don’t want their heavies to feel like a muffler exhaust

9167-A7-F9-20-D2-4416-9-C7-D-5-D9-C5-F2-A2-C3-D hosted at ImgBB

Image 9167-A7-F9-20-D2-4416-9-C7-D-5-D9-C5-F2-A2-C3-D hosted in ImgBB

ibb.co

3 weeks until I can show the sample, 3 more weeks after till it reaches everybody Preorder will hopefully only last 4-5 weeks until it ends. Instead of adding glass I am going to have reduce to $110 plus S&H which should be around $15 in US, but s&h can be dealt with later once I know weight and packaging if you would like.
Price after preorder will be very similar to Prodigy, slightly less with shipping costing just a little less.

Preorder price might go up a little once sample is made to adjust if need be, wouldn’t be a drastic increase. Preorders made before sample will stay at the original price if there are any changes

 

[4everpushingaboulder]

I’m digging that drawing. Can’t wait to see the sample.

Looks like a jhook-ashcatcher-Oregon glass -cooling stem- all-in-one-standing rig.

Seems more catchy than Prophet?!

 

[iDRINKBLEACH]

I’m having a mold made right now since this has so many sharp right angles at the base this will keep all the 90s a lot sharper and more clean, it will also reduce a lot of variances.

 

[Shit Snacks]

I’m having a mold made right now since this has so many sharp right angles at the base this will keep all the 90s a lot sharper and more clean, it will also reduce a lot of variances.

Going to be great, the first W hook

 

[mephisto]

Just received my Prodigy, and test drove it. I thought I had good lung capacity, but with the water at half full there is no way I can clear the can. I used the Anvil to test it, and the diffusion is fantastic. The B2 will be sitting on this piece full time.
Great work! IDB......I will happily throw more cash at you for a pint size Prodigy, and a Prophet.

 

[Shit Snacks]

Just received my Prodigy, and test drove it. I thought I had good lung capacity, but with the water at half full there is no way I can clear the can. I used the Anvil to test it, and the diffusion is fantastic. The B2 will be sitting on this piece full time.
Great work! IDB......I will happily throw more cash at you for a pint size Prodigy, and a Prophet.

Yeah that is why you need to fill the water nearly to the top of the bottom base, otherwise it's a struggle with the volume, but that also does give it a lot more chug restriction, it is a versatile piece!

 

[Razhumikin]

Any news on the Prophet sample?

 

[Shit Snacks]

There is news that a prodigy is being given away if you comment tagging friends here:

iDB on Instagram: "420 giveaway!!! Going to be giving this Prodigy away. The downstem is slanted but functions perfectly. Rules 1: must be following 2:must like reel 3: tag 3 friends that like free glass- unlimited entries BONUS- repost this and tag

122 likes, 232 comments - cloud_connoisseur_official on April 20, 2022: "420 giveaway!!! Going to be giving this Prodigy away. The downstem is slanted but functions perfectly. Rules 1: must be following 2:must like reel 3: tag 3 friends that like free glass- unlimited entries BONUS- repost this...

www.instagram.com

 

[iDRINKBLEACH]

Any news on the Prophet sample?

I have been told I was affected by the giant shutdown over seas. I actually just messaged this morning about it myself to see if my order has continued. I will post back later tonight/ early AM with the answer I’m given.

Also like @Shit Snacks said. Doing a giveaway of some glass on my IG

 

[iDRINKBLEACH]

I was told they have been shut down, and I didn’t get an exact answer when they will be able to continue but that they just said hopefully soon. Hopefully they are right, I know they will follow through ASAP and it’s out of their control, but dang it was so close to making showcase

 

[Shit Snacks]

I was told they have been shut down, and I didn’t get an exact answer when they will be able to continue but that they just said hopefully soon. Hopefully they are right, I know they will follow through ASAP and it’s out of their control, but dang it was so close to making showcase

Ugh that is so annoying after all the delays, to be hit with more, but typical when you rely on outside suppliers? At least we know they are good people so they will do what they can when they can, hopefully soon enough!

 

[Razhumikin]

I was told they have been shut down, and I didn’t get an exact answer when they will be able to continue but that they just said hopefully soon. Hopefully they are right, I know they will follow through ASAP and it’s out of their control, but dang it was so close to making showcase

Thats pretty troubling...

 

[ConvectCode1]

Where do I buy one of these rigs? I realize this is a 6 month old thread but I want that….

 

[Shit Snacks]

Thats pretty troubling...

Yeah China is dealing with a bad wave of covid again? Must be close to Shanghai?? We are probably in for another wave here in the US soon enough...

Where do I buy one of these rigs? I realize this is a 6 month old thread but I want that….

Haha you can just hit him up, here or on IG is faster, if there are any left in stock!

 

[iDRINKBLEACH]

Sample has been started again every one has been able to get back to work and they reached out to me to tell me that everything is going again.

 

[4everpushingaboulder]

Sample has been started again every one has been able to get back to work and they reached out to me to tell me that everything is going again.

I’ve been wondering when we’d see a prophet sample!

 

[iDRINKBLEACH]

Yeah man it was literally they day after I put money down for prophet they shut down. Thankfully every one is healthy and is back to as normal as things can get now days it seems