Cloud Connoisseur Glass

delta hotel

Well-Known Member
Mine arrived last night and tried with B2 with Shovelhead bowl. Water an inch from top of base. Got very high but need to dial in devices and water levels.
I'm using my B-1 on it with about the same amount of water. I may have to try my B-2, it's more restrictive, and this being 18mm, it might change it up some. It's something to try other than adding more water. I think the water's right about where it is for me, but it's still a little too much volume. I could add some water, but I don't like dumping out that much water so often. Luckily, or unluckily for me, I'm often bad about changing my water when I should, so maybe in reality it's not really THAT often. Also getting the last little bit of water out when dumping it can be a little tricky due to it's shape.

I'm still liking it very much though, I just need to dial in the water level a little more. I've got an 18mm drop down on the way that I hope fits. It's a great piece other than taking a little too much water to fill for me, and that's just personal preference.
 
Last edited:

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
Hey every body! ❤️❤️❤️
Life has been super crazy for me lately with a move I’m still in the middle of, most of it is done thankfully. With all this going on I have been more distant on social media, with applying my time where it’s most needed.

Prodigy is in stock and I will list the few I have in very soon, a long with glass bowls. I just need to make sure every one who was in is taken care of first.

Project Prophet has begun again with more info becoming available very soon.
 

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
@iDRINKBLEACH Any chance of a "Mini Prodigy" in the future? :D
It sounds like most people think that the volume can be a bit too large unless you fill it with a lot of water.
Yes sir. ❤️ Dry rig is coming first. I have my price set and pre order deal in mind, then Protégé release. 30% smaller than prodigy with carb plumbed into the downstem. Shooting for July-august for it
 

Razhumikin

Well-Known Member
I have been absolutely loving my Prodigy since I've gotten it on Monday. It has been an incredible partner to my new GTR, and Ive been taking giant hits with the two of them all week. However, because I've been having so much fun, cleaning time is now fast approaching, and I'm feeling a little mystified about how to best get it done. Has anyone cleaned this thing without just using a gallon of ISO?
 

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
I have been absolutely loving my Prodigy since I've gotten it on Monday. It has been an incredible partner to my new GTR, and Ive been taking giant hits with the two of them all week. However, because I've been having so much fun, cleaning time is now fast approaching, and I'm feeling a little mystified about how to best get it done. Has anyone cleaned this thing without just using a gallon of ISO?
I use just a lil bit about an inch maybe a lil less on the bottom with a decent amount of fine salt. Poured down the downstem, usually that is enough to clean up the downstem since it’s mainly dry debris. Then rinse with piping hot water. It cleans up fairly easy. I also use silicone plugs so I can turn upside down and whatnot, let’s me get more use of less alcohol with all my glass cleaning.
 

Easywider

Simple is the way
My cleaning process is about the same. I usually pour about 3/4cup of warmed iso through the down stem ( plug and shake ) then the iso gets poured back into a container for re-use. Run some hot water through followed by a vinegar rinse. I've also had great success with PBW after a combustion incident or two.
 

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
Prophet dry rig, for those who prefer dry vapor but don’t want their heavies to feel like a muffler exhaust
We Did It Win GIF by HBO Max


3 weeks until I can show the sample, 3 more weeks after till it reaches everybody ❤️❤️❤️ Preorder will hopefully only last 4-5 weeks until it ends. Instead of adding glass I am going to have reduce to $110 plus S&H which should be around $15 in US, but s&h can be dealt with later once I know weight and packaging if you would like.
Price after preorder will be very similar to Prodigy, slightly less with shipping costing just a little less.

Preorder price might go up a little once sample is made to adjust if need be, wouldn’t be a drastic increase. Preorders made before sample will stay at the original price if there are any changes
 

mephisto

Well-Known Member
Just received my Prodigy, and test drove it. I thought I had good lung capacity, but with the water at half full there is no way I can clear the can. I used the Anvil to test it, and the diffusion is fantastic. The B2 will be sitting on this piece full time.
Great work! IDB......I will happily throw more cash at you for a pint size Prodigy, and a Prophet.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Just received my Prodigy, and test drove it. I thought I had good lung capacity, but with the water at half full there is no way I can clear the can. I used the Anvil to test it, and the diffusion is fantastic. The B2 will be sitting on this piece full time.
Great work! IDB......I will happily throw more cash at you for a pint size Prodigy, and a Prophet.

Yeah that is why you need to fill the water nearly to the top of the bottom base, otherwise it's a struggle with the volume, but that also does give it a lot more chug restriction, it is a versatile piece!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
There is news that a prodigy is being given away if you comment tagging friends here:
 

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
Any news on the Prophet sample?
I have been told I was affected by the giant shutdown over seas. I actually just messaged this morning about it myself to see if my order has continued. I will post back later tonight/ early AM with the answer I’m given.

Also like @Shit Snacks said. Doing a giveaway of some glass on my IG ❤️❤️❤️❤️
 

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
I was told they have been shut down, and I didn’t get an exact answer when they will be able to continue but that they just said hopefully soon. Hopefully they are right, I know they will follow through ASAP and it’s out of their control, but dang it was so close to making showcase 😩
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I was told they have been shut down, and I didn’t get an exact answer when they will be able to continue but that they just said hopefully soon. Hopefully they are right, I know they will follow through ASAP and it’s out of their control, but dang it was so close to making showcase 😩

Ugh that is so annoying after all the delays, to be hit with more, but typical when you rely on outside suppliers? At least we know they are good people so they will do what they can when they can, hopefully soon enough!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Thats pretty troubling...

Yeah China is dealing with a bad wave of covid again? Must be close to Shanghai?? We are probably in for another wave here in the US soon enough...

Where do I buy one of these rigs? I realize this is a 6 month old thread but I want that….

Haha you can just hit him up, here or on IG is faster, if there are any left in stock!
 
Top Bottom