Cheap High Quality Bubbler

alltoreup

alltoreup

Damn you, party liquor
twentypast4 said:
I feel like I'm getting closer to pulling the trigger.

My choices are going to be two of the following three:
-FC710 diffusion pump
-FC-CAKE
-CCG D cycler

Experiences? I dab exclusively
Click to expand...

Having just hit both the 710 and the dcycler this early shatterday, you can't go wrong with getting both of those. Those are the two most highly recommended dab rigs on FC I believe. And they get two high thumbs up from me this morning.
No experience with the cake.
 
eLiguL

eLiguL

Well-Known Member
Joel W. said:
Arrggg... The crack from last winter on my first dab rig finally expanded through and around the base and failed 100% yesterday into 2 pieces. Now using my recycler vortex more and it always seems to plug up with recaim at the top of the vortex drain with no easy fix. No more 14mm joints for me...

I pulled the trigger on the FC-UFO
Click to expand...

If a clog developes(why is spell checking telling me its develops?) at the drainage point, right away what jumps to my mind is pour in a little alcohol from the mouth piece and swirl till its cleared?
 
wildything

wildything

Well-Known Member
Joel W. said:
Arrggg... The crack from last winter on my first dab rig finally expanded through and around the base and failed 100% yesterday into 2 pieces. Now using my recycler vortex more and it always seems to plug up with recaim at the top of the vortex drain with no easy fix. No more 14mm joints for me...

I pulled the trigger on the FC-UFO
Click to expand...
If you are able to run hot water from a facet through the piece regularly this will get the minority of the reclaim out and keep the pice cleaner without needed to go all out with alc, salt, and shaking. It only takes a minute and is worth it if you want to keep the perc/ function perfect.
 
J

Joel W.

Deplorable Basement Dweller
Accessory Maker
eLiguL said:
If a clog developes(why is spell checking telling me its develops?) at the drainage point, right away what jumps to my mind is pour in a little alcohol from the mouth piece and swirl till its cleared?
Click to expand...
Yes, That seems the only real fix is to fill it with iso and set it in warm water and start fresh. It's going on a shelf once the UFO lands.:

edit
wildything said:
If you are able to run hot water from a facet through the piece regularly this will get the minority of the reclaim out and keep the pice cleaner without needed to go all out with alc, salt, and shaking. It only takes a minute and is worth it if you want to keep the perc/ function perfect.
Click to expand...
Thanks for the tip, I should try this more often instead of after it's too late I suppose.
 
GetLeft

GetLeft

Well-Known Member
eLiguL said:
If a clog developes(why is spell checking telling me its develops?)
Click to expand...

develop [dih-vel-uhp]


I know. No one likes a smart ass. Comes with age, I'm assuming.
Or have I always been an ass?

Joel W. said:
No more 14mm joints for me… I pulled the trigger on the FC-UFO
Click to expand...

Thanks for that link. Looks like a solid piece at a reasonable price.
 
Last edited by a moderator:
C

ChiefKeefe

Well-Known Member
After abusing my D-cycler for a few days I love it a lot. My perc has a lot of good size holes. And it vortexs nice with a lower water and higher water level. However, the biggest thing ive noticed with it is that it reclaims a LOT more then my kathy egg or fc-711.

I love all 4 of these..

257hv93.jpg


-fc-187 v2 sidecar (mobius matrix knockoff bub) have owned the real thing and I love this one. Main problem is the hole that meets the mouthpiece is semi small making cleanint more annoying, function isnt effected tho.

-next is the fc-710 (steve bates diffusion pump knockoff). Havnt owned the real deal but the function on this is the same as the videos ive seen on the real one. This piece reclaims a bit but its not as much as the d cycler, def more then kathy egg. Smooth but still tasty hit. Water level picky.

-the d cycler from CCG (see top of post) have not owned the real one but I love this thing. One downside is reclaims a lot. Mine DOES NOT get clogged, and i have abused it in its few days here so far.

-and the kathy egg. (Have not owned a real mothership egg but my LHS has 2 for water tests. Dosnt hit as similar but i love the function.

Very smooth, least reclaim of the 3, function is amazing.
My favorite so far.

However kathy was kind of annoying to deal with.. All reviews are with a halen quartz trough.

Will post the new ones when here. Just cleared customs into NY.

(Sov triple bore stem 8 and SSFG hydratube peakin in the background)

-chiefkeefe
 
PuffNStuff

PuffNStuff

Well-Known Member
ChiefKeefe said:
After abusing my D-cycler for a few days I love it a lot. My perc has a lot of good size holes. And it vortexs nice with a lower water and higher water level. However, the biggest thing ive noticed with it is that it reclaims a LOT more then my kathy egg or fc-711.

I love all 4 of these..

257hv93.jpg


-fc-187 v2 sidecar (mobius matrix knockoff bub) have owned the real thing and I love this one. Main problem is the hole that meets the mouthpiece is semi small making cleanint more annoying, function isnt effected tho.

-next is the fc-710 (steve bates diffusion pump knockoff). Havnt owned the real deal but the function on this is the same as the videos ive seen on the real one. This piece reclaims a bit but its not as much as the d cycler, def more then kathy egg. Smooth but still tasty hit. Water level picky.

-the d cycler from CCG (see top of post) have not owned the real one but I love this thing. One downside is reclaims a lot. Mine DOES NOT get clogged, and i have abused it in its few days here so far.

-and the kathy egg. (Have not owned a real mothership egg but my LHS has 2 for water tests. Dosnt hit as similar but i love the function.

Very smooth, least reclaim of the 3, function is amazing.
My favorite so far.

However kathy was kind of annoying to deal with.. All reviews are with a halen quartz trough.

Will post the new ones when here. Just cleared customs into NY.

(Sov triple bore stem 8 and SSFG hydratube peakin in the background)

-chiefkeefe
Click to expand...
How do you hit the piece in the far left corner? I see no mouth piece O_o
 
BoogerMan

BoogerMan

Well-Known Member
Just got my replacement puck cycler in from Kathy. First one had a crack.

The piece is well made and holds its weight for its size. The joint location helps the piece keep its center of gravity. Not tippy at all unless using a drop down and a heavy vape.

I really like this piece. It has some chug to it. 3 hole perc. It's nice though. I've been using it with my e-nail, solo, and e-nano. I like the low profile body and the tube mouthpiece is nice for a change.

It vortexes on the drain. It is almost impossible to get it go vortex while using it. You have to have the perfect water level and be pulling at just the right speed to get a little mini vortex.

Pic with Solo and @VaPeD&CoNfUsEd carbed gong

200392A1-88BC-4911-B939-21BBB6D2A9BF_zpsasfc8hnz.jpg
 
vicious916

vicious916

Dab Connoisseur
Just got my ccg egg and I got lucky and got slitted perc fuck yea!!! I ordered it on 4/11 got a perfectly straight joint too : D This thing is a beast best rig i've ever hit by far d-cycler i just got doesn't even compare to how good the functionality of this thing is not too big perfect size thick glass ill post a function vid with my new sic nail soon thanks CCG much love.....
jnVa2dm.jpg
OSenBYX.jpg
 
cybrguy

cybrguy

Putin is a War Criminal
Have the folks who have gotten their FC-UFO had any issues with the MP joint being too low in the can? It looks like it could have a drink problem depending on the MP. It enters the can nearly 1/3 of the way down.

Quite a few have sold but I'm not seeing much posting on it.

vicious916 said:
Just got my ccg egg and I got lucky and got slitted perc fuck yea!!!
OSenBYX.jpg
Click to expand...
Dude! You haven't even gotten home from the post office yet!! :rofl:
 
Last edited:
mixchu69

mixchu69

Well-Known Member
cybrguy said:
Have the folks who have gotten their FC-UFO had any issues with the MP joint being too low in the can? It looks like it could have a drink problem depending on the MP. It enters the can nearly 1/3 of the way down.

Quite a few have sold but I'm not seeing much posting on it.


Dude! You haven't even gotten home from the post office yet!! :rofl:
Click to expand...
Yea. Very, very close to water in the mouth, depending on how you hit it.

Edit. I adjusted the water level barely above the perc and no more concerns. Was awfully close when I filled about a 1/2 inch above the perc (maybe a centimeter).
 
Last edited:
NickDlow

NickDlow

Log Hog
cybrguy said:
Have the folks who have gotten their FC-UFO had any issues with the MP joint being too low in the can? It looks like it could have a drink problem depending on the MP. It enters the can nearly 1/3 of the way down.

Quite a few have sold but I'm not seeing much posting on it.


Dude! You haven't even gotten home from the post office yet!! :rofl:
Click to expand...

I've been ripping on my UFO since I've recieved it and not a single drop of water has touched my lips. It's my favorite flower vaping piece to date.
 
You must log in or register to reply here.
Top Bottom