Cheap High Quality Bubbler

Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
It could be the restriction factor I have recyclers that don't vortex with my EVO due to the restriction and they will vortex with my Cloud+ and vice versa
 
Cannabis Connoisseur,
Mr. Gweilo 420

Mr. Gweilo 420

Dude
EverythingsHazy said:
That's was part of my side of the argument. The original pillar doesn't even have a bent neck coming from the top. It has a long curved neck coming from the side. One that steven's people weren't going to accurately replicate. The fact that it came from the side, coupled with the length, and curve, also prevents water from getting into your mouth.

Every time I said something though, I got attacked, and we ended up getting screwed with the timing now because of it. Nobody was listening to the logic behind my ideas, or even making any counter claims.
Just arguing that they weren't in agreement with the ones who blindly wanted a bent neck. Every issue with the bent neck was pointed out prior to it being made. The good thing about forums, is that all of those posts are still around.
Click to expand...
Pretty sure I read this post a few times already.
 
Mr. Gweilo 420

Mr. Gweilo 420

Dude
It seems having a bubbler named after you and receiving credit is a really big deal for you. Every glass thread I open there seems to be a similar comment about the mouthpiece. Perhaps comments about your collaborative designs should be kept to that thread?
 
Last edited:
EverythingsHazy

EverythingsHazy

Well-Known Member
Mr. Gweilo 420 said:
It seems having a bubbler named after you and receiving credit is a really big deal for you. Every glass thread I open there seems to be a similar comment about the mouthpiece. Perhaps comments about your collaborative designs should be kept to that thread?
Click to expand...

Perhaps people should stop complaining, and be happy they are getting anything remotely related to a pillar perc for under $100. I agree people should discuss the matrix pillar in the custom thread until it is being sold, but they brought in old design pics here and started saying they didn't like the neck/mp on the new one, so I cleared things up and let them know that that pic was an old design, and that the better, bubbler style neck is still going to be produced. Even if we have to wait now that time was wasted on the bent neck.

"I was actually told that I should have Steven name my piece the E(verythings)h(azy)-186, because I was the only one who was saying that the bent neck was a bad idea, and to let the "Full Sized Matrix Pillar" have the bent neck from the top.
Click to expand...
Wasn't my idea. I had originally suggested fc-186 and someone else posted a long message to me about why it shouldn't be called that, and that I didn't take suggestions (obviously not true as proven in the last couple of weeks...)etc. etc.
"It seems having a bubbler named after you and receiving credit is a really big deal for you."
Click to expand...
:hmm:

----------------------------------------------------------


Anyway, as of right now, from talking to some sellers, everything seems to be starting to get hectic for CNY already, so if anyone intends on getting anything before march, they should probably get on that.
 
Last edited:
blindowl

blindowl

goin to some place where I've never been before
Had some time some made a couple vids of the recyclers i got last week and the fc-710! out of the 5 i would say the puck and fc 710 are my favorite for dabbing. they provide smooth and flavorful hits. the gb-242 is great paired with my underdog and those long slow low temp draws (altho i did a dab in the vid) pyrology knockoff is a cool show, friends seem to like that one best. the double recycler is quite chuggy, no one seems like to hit that one much, and its hard to get good balance with it and a dropdown. its a shelf piece i guess

kathy puck recycler


pyrology knockoff


gb-242


kathy double recycler


FC-710!

 
NewVape

NewVape

What a guy!
Lovely videos! Thanks for sharing, the FC710 function looks spot on. Gives me hope for the incycler. Afew questions about the GB-242. What is the joint size? Is is really that good with the UD? I.e. do you still get a vortex when taking those "long slow" hits? And did you get yours from Yinman?

I'd really like a recycler that I can pair with my UD, but it seems that all the recyclers I see require a much faster draw speed then I use. OK for my LSV, not so much for my UD.
 
Mr. Gweilo 420

Mr. Gweilo 420

Dude
NewVape said:
Lovely videos! Thanks for sharing, the FC710 function looks spot on. Gives me hope for the incycler. Afew questions about the GB-242. What is the joint size? Is is really that good with the UD? I.e. do you still get a vortex when taking those "long slow" hits? And did you get yours from Yinman?

I'd really like a recycler that I can pair with my UD, but it seems that all the recyclers I see require a much faster draw speed then I use. OK for my LSV, not so much for my UD.
Click to expand...
I'm a fan of the barrel to funnel recycler with my Enano. I imagine it may also pair well with an Underdog. It does have a 14mm male joint though. I use it with a carbed female Joda gong.
 
Last edited:
MuushuPork

MuushuPork

Well-Known Member
Starting to get tired of the male joint on the FC710. With a nano gong im getting all the claim running right in between gong and joint. Id like a dropdown but not sure about if id ever feel comfortable holding all that. Any solutions or links to good 14mm female to 18 mm female dropdowns or reclaimers?
 
Mr. Gweilo 420

Mr. Gweilo 420

Dude
MuushuPork said:
Starting to get tired of the male joint on the FC710. With a nano gong im getting all the claim running right in between gong and joint. Id like a dropdown but not sure about if id ever feel comfortable holding all that. Any solutions or links to good 14mm female to 18 mm female dropdowns or reclaimers?
Click to expand...
Check out Sunshine Store on Dhgate. They have dropdowns at the moment.
 
Mr. Gweilo 420,
  • Like
Reactions: SSVUN~YAH
blindowl

blindowl

goin to some place where I've never been before
NewVape said:
Lovely videos! Thanks for sharing, the FC710 function looks spot on. Gives me hope for the incycler. Afew questions about the GB-242. What is the joint size? Is is really that good with the UD? I.e. do you still get a vortex when taking those "long slow" hits? And did you get yours from Yinman?

I'd really like a recycler that I can pair with my UD, but it seems that all the recyclers I see require a much faster draw speed then I use. OK for my LSV, not so much for my UD.
Click to expand...

@NewVape It is a 14mm male joint. I've only been using it a couple days with my UD, normally i've been using a gb-187 or the fc-187 with it so its been a nice change of pace. doubt it will be my daily driver with it. i've made a quick vid for you with the UD, i start with what i call a slow draw, it vortexes slightly, then i speed up at around the 12 seconds mark and it vortexes a bit better.
depending on the weight of your UD a dropdown may become unstable and tippy. and without a dropdown the thing is pretty much in your face. i have the rather light weight sugar maple twig so the cheap alina dropdown works ok for me and i point the UD power wire straight back at the mouthpiece, this gives it a good balance.
hope that helps :peace:

edit - and yes, ordered from yingmin5

 
DieHard

DieHard

Accessory supplier
Accessory Maker
vjt324 said:
This is a maaaaajor bummer as I've been anxiously awaiting this lil piece. I think it channels a skimask glass or nexus glass puck style type of thing. Any chance u can show any pictures. Maybe even a video??
Click to expand...
I have this piece and I'm really enjoying it. The vortex isn't strong . You can see itvwhen it drains. But the recycling action is good and the hit from it is nice. BUT mine arrived with several stress cracks, it's still functional though. Kathy is sending me a new one after sending pictures of the cracks.
 
vjt324

vjt324

Well-Known Member
DieHard said:
I have this piece and I'm really enjoying it. The vortex isn't strong . You can see itvwhen it drains. But the recycling action is good and the hit from it is nice. BUT mine arrived with several stress cracks, it's still functional though. Kathy is sending me a new one after sending pictures of the cracks.
Click to expand...

Kathys fucking around with the fake tracking number shit again, been 8 days and it hasn't gone live. Patiently waiting for that and the 710 and a d022 from sunshine, the latter which was orderd a couple days ago and I bet it gets here first.
 
jambandphan03

jambandphan03

in flavor country
I think China New Year is happening and everthing shuts down for a while... sorry if you get stuck waiting. I saw a post a few pages back warning people that thier orders may take longer than normal due to this holiday... fyi
 
H

Herr_Dampf

Well-Known Member
Mr. Gweilo 420 said:
We are still a few weeks away from CNY. February 18th is the start for me.

Why does Kathy still pull that shit? Its so unnecessary and counter productive.
Click to expand...

My guess would be because of the displatch pledge: http://www.dhgate.com/html/seller-guarantee-services01.html

My last order was placed on the 27th, I got an update on the 28th it had shipped out, then no updates until the tracking kicked in on the 1st saying it was actually sent on the 1st. No fake number though, they just get a tracking number as soon as possible and actually mail the item whenever.

That said, if you got a potential fake tracking number that hasn't updated in a week and your product is in the dispatch pledge program you could still try to report them:
When the seller provides an invalid tracking number: We will investigate the situation after we receive a complaint from the buyer. Once the tracking number is confirmed to be invalid, the system will automatically release payment to the buyer and also deduct US $30 from the seller’s account to compensate the buyer.
Click to expand...
 
ma0u

ma0u

frozWn Member
Heads up everyone, I was speaking with yingmin5 about the mobi 18mm slider, and he mentioned that he will put the 1pc GB-187 back up for sale this week! Also, yingmin's releasing a sidecar version of the GB-187 called the GB-187-S (we'll see how that lines up against the FC-187) :clap:
 
tepictoton

tepictoton

Well-Known Member
Just received my fc-187 from Steven...superpleased with this purchase. Quick shipping time. Piece itself is almost flawless. Only one little piece of glass on the intake of the mouthpiece that seems to have gotten attached to it...functions really nice and the new matrix perks are nice.

Now let's see if he can make that incycler function right then I can order one of those together with one of his new minis with bangers...
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Nice! Woke up this morning, checked dhgate, and saw yingmin5's GB-187-S!!!

Needless to say I have already ordered one. Can't wait to see how it stacks up against my FC-187 (I already have a friend who wants to buy my FC-187 for combustion). Really happy to get my order in before CNY.....

For anyone with issues using their credit card - I've been using Skrill.com for the past few transactions, and it works great. Of course they charge an extra 1.5% or some BS for adding funds via credit card, but still it only adds an extra $2 or so to my total order. I'll gladly pay that for some peace of mind that nobody is going to steal my CC info
 
ma0u

ma0u

frozWn Member
yingmin showed me the pics of the GB-187-S a few hours before putting it up, and noticed it's a right sidecar (not sure if getting a left is an option); either way, it looks badass and I'm buying it along with another GB-187 (prob just a clear, rather than mobi labeled one, this time).
 
Tweak

Tweak

T\/\/34|<
alltoreup said:
My only concern with yingmins sidecar is that mouthpiece looks like it's attached pretty low on the can.
Click to expand...

Photo for reference:

rBVaHFTQeMaAQNOvAAI8qGuDMUA192.jpg


Glad you pointed that out before I ordered one. I had a Black Leaf Bubbler with this issue, hated how long it took to clear the vapors.
 
You must log in or register to reply here.
Top Bottom