Cheap High Quality Bubbler

Vicki

Herbal Alchemist
Thanks, :spliff:



Yeah it's RB. I use about 3-4 drops in this piece. Used to use way more but found you don't need much.

I'm thinking the reason it looks cloudy is because the water was from the fridge and there is condensation on the outside of the glass. It doesn't usually get that cloudy until after a session or two.

I use room temp bottled water for my glass, but noticed it would also get cloudy after a couple sessions. I may just try one drop since my bubbler is so small.
 

tennstrong

Well-Known Member
My Kathy dabuccino came in last week, finally got come concentrate today :tup:. Very nicely crafted, 4 hole diffy (in the shape of a showerhead) closed off. Rips great. Only complaint is there's almost an inch of excess downstem before the joint, if it came right off the top of the lid it would be perfect.
xrvTQNh.jpg
kz5HLlc.jpg

IMO the better option vs. the opened downstem version.
Second this, any perc generally with a closed downstem will function better than another without (exception being if you are combusting which would clog it, but shouldn't apply to this forum :) ). They are hands down better in nearly all pieces I've seen.
 

Deadhead710

Member
Hey its been awhile since I've been in this thread.where are these mothership minis I see on instagram coming from? they def look China made i Will try and post pic later
 
Deadhead710,

tennstrong

Well-Known Member
Hey its been awhile since I've been in this thread.where are these mothership minis I see on instagram coming from? they def look China made i Will try and post pic later
They are made in china, I've gotten responses from suppliers but they require very large quantity orders. The unit price is quite low, so the markup people are putting is huge. I'd say just wait for smaller suppliers to pick up on it, the price on the piece will probably be under 30$
 

Deadhead710

Member
They are made in china, I've gotten responses from suppliers but they require very large quantity orders. The unit price is quite low, so the markup people are putting is huge. I'd say just wait for smaller suppliers to pick up on it, the price on the piece will probably be under 30$
Yeah I saw a guy on IG selling them for 250.00 was like nooooo way. I've been waiting to see them pop up on one of the trusted vendors on here.hopefully soon.
 
Deadhead710,
  • Like
Reactions: SSVUN~YAH

vjt324

Well-Known Member
LH6V1ew.jpg


http://www.dhgate.com/store/product/glass-recycler-spiral-tall-recycler-rig-with/217640325.html

New from CCG .
I've seen one of the reall ones that they made this based on but I can't find the function vid on IG... If it functions like the real one then that's an awesome piece.

On another note what do u guys use to clean ur pieces?!?!!!!.... And what do u use to keep em clean??!

edit:
9lPx9mb.jpg


http://www.dhgate.com/store/product/amazing-twisted-white-black-glass-water-pipes/211794780.html

They just got this up line knockoff too if anyone's interested
 

EverythingsHazy

Well-Known Member
On another note what do u guys use to clean ur pieces?!?!!!!.... And what do u use to keep em clean??!
Three drops of cranberry extract (alcohol free) on your water will keep the piece shining and clean with nothing but ht water rinses between use. An ISO and salt shake should sterilize and scrub the piece clean, after a few days of use.
 

Elevapor

Well-Known Member
LH6V1ew.jpg


http://www.dhgate.com/store/product/glass-recycler-spiral-tall-recycler-rig-with/217640325.html

New from CCG .
I've seen one of the reall ones that they made this based on but I can't find the function vid on IG... If it functions like the real one then that's an awesome piece.

On another note what do u guys use to clean ur pieces?!?!!!!.... And what do u use to keep em clean??!

edit:
9lPx9mb.jpg


http://www.dhgate.com/store/product/amazing-twisted-white-black-glass-water-pipes/211794780.html

They just got this up line knockoff too if anyone's interested

My luck I'd probably break that first piece in no time, it also looks like a pain in the ass to clean.

(EDIT: Oops, @EverythingsHazy beat me to it) I usually just change the water after every use and do a iso and salt shake when it starts looking a bit grungy. You can add a couple drops of cranberry extract to your water if you want to help keep things a little cleaner. It's the same stuff as rezblock.
 
Last edited:
Cannabis Connoisseur,
  • Like
Reactions: SSVUN~YAH

beware116

Well-Known Member
I recently picked up a QB-001 from Sunshine Store to accompany my cherry E-Nano. $18+$23 shipping, single honeycomb. This piece is everything I wanted it to be. Sturdy, 5mm thick glass, 19mm sidecar, perfect size, no drag, little diffusion. I had reservations about getting any of the pieces that seemed ostensibly better or cheaper because they had far too much diffusion for my tastes. This tube has the least chug of any bong I've used for combusting or otherwise. I can get fat, milky hits with relatively little effort and hold them as long as I am able.

I've been using warm water mostly, though the piece uses such a small amount of water that it cools pretty quickly. I haven't had a chance to pick up any distilled water or cranberry extract, so some hard water stains have started to build. A little lemon juice will remove those, right?

http://www.dhgate.com/store/product/qb-001-glass-water-pipe-with-honeycomb-disk/185774100.html

I also had no need for the oil rig parts, so I asked for a bowl with a handle on it instead. SSS included two of that bowl instead of the oil rig. Unfortunately, I'll probably never use them, but it's nice that the seller was communicative and willing to make a substitution like this. All in all, I couldn't be happier. A simple water pipe solves every problem I've ever had with vaping. No more tickly throat, no more unfathomable dry mouth, just beautifully conditioned and tasty vapor.

While the piece is a little large, I don't feel too bad about transporting it. It travels pretty well wrapped in some bubble wrap. Since there are no moving pieces or complex percs and everything is at least 5mm thick it can safely be slipped into a duffel. This piece is so nice, in fact, that I'm contemplating investing in a separate, smaller travel-piece. Does anyone have any suggestions? I'm looking for something that goes with an E-Nano and/or a Lotus.
 

vjt324

Well-Known Member

Delta3DStudios

Well-Known Member
Accessory Maker
Does anyone have any suggestions? I'm looking for something that goes with an E-Nano and/or a Lotus.
If you haven't already picked up the original D020, I HIGHLY suggest you check it out - VERY small for the price (I wasn't expecting it to be so small) - It was my first DHGate purchase, and still one of my favorites (I like to add it to my daily glass rotation from time to time)

http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html
 
Delta3DStudios,
  • Like
Reactions: SSVUN~YAH
I just got mine in 18mm from Stevenlmz79 and it looks just like most of the pics with the slime green straw and downstem. Not the best sandblasting on my piece but nothing to complain about for under $30. The perc is much better through Kathy, mine is a 4 slit/hole diffuser with a pinched end looking like a fat plus symbol (+). Chug isn't too bad but I bet yours purrs! The dome was not ground which is refreshing. Also the Shatter, Wax, and Crumble boxes and side markers make a nice addition. Overall pretty happy with the piece as well as the seller. Great packaging and since he is working with our community, I will order again soon!

Has he came out with a newer model because the ones I purchased and other friends bought came with am wide open downstem. That is chug city.

Modnote: removed reply from quote tags
 
Last edited by a moderator:
ConstanlyConcentrated,
  • Like
Reactions: SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Just received this little beauty! Think pipesdaddy infamous bubbler size. The 14-14 male drop down is even and quartz domeless is legit. The bowl is janky, but who needs that?!? The colors are vibrant and hold up well even when held to a light. Only 3-4 tiny bubbles spotted so far and you really have to look to find them. Welds are solid, 14mm joint is solid, 4 slit worked perc & amber colored base is sweet and thick. Packaging was styrofoam with a whole roll of yellow tape. Though it was a pain to clean off the tape marks and foam, everything arrived in excellent condition. Haven't had a chance to put it to good use yet, but the nano and air fit great and the water test was stacking nicely!
 
Top Bottom