Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
FUnhouse
Well-Known Member
flickyourbic
Well-Known Member
I really want that recycler and sidecar.. As long as it wasn't pink.
oli
Well-Known Member
You mean like the Low DDave adapter over on the EQ thred? There is even a link but over here (europe) the links does not work...
Hi oldiebutgoodie,
Correct. Originally, was just the F/F adapter and the stock Q elbow. Performance increased from both Elbow Packs and standard bowl loads (for me, elbow packs resulted in more vapor, standard load more flavor).
The along came Tweak, improving on perfection, he suggested the SSV Wand. And improve things it did! You are again correct in stating that the material is placed between the stock SSV Wand screen and Q-elbow screen. And as odd as it sounds, performance improved dramatically. Not sure on the technicals behind it, but a medium-strength draw results in the herb packing itself up against the SSV Wand Screen and performing like an Elbow Pack, but with less drag. A slower drag and you will be able to watch ALL your material dancing on top of the Q-elbow screen within the Wand.
On many occasions, I prefer a quick-strong session, whereby I can extract the most goodies with the least amount of draws. The F/F & SSV Wand combo allow just that. What used to take 20 draws to reach desired levels, now takes 4-5. And, on the chance that I'd prefer a slower, more-draw but more flavorful session, I simply load the F/F adapter and place the SSV Wand on top (using the SSV Wand in the same manner as the Q-Elbow), drop temp a bit. Then sit back & enjoy.
Hope this helps!
DDave
Hi Liberty, depends on what you're looking for.
* Quick session: Starts and stops at max temperature you normally vape to. This gives quickest extraction.
* Flavorful Session: Starts low and stops at max temperature you normally vape to. This gives just about the same medicating experience, but you get to enjoy the flavors much more during the beginnings of the session.
* Some now, Some Later session: Starts and ends at low temperature, more of an uplifting-energetic effect. Then product is saved for later vaporizing at higher temperatures (more sedative, pain killing effect).
Hope this helps!
Vape On!
Hey Da_Man, I dont think that is the adapter that will fit nicely within the Arizer. Here's a picture of mine. Look at the middle ring section and at how they differ. The one I found fits very nicely. From feedback we see on this site on the other adapter, the center glass ring is too wide to allow the adapter to sit on the heater.
Hope that helps! If you find other adapters, send the links my way and we'll eventually locate the proper adapter.
Vape On!
oli
Well-Known Member
Hopefully these won't be long to hit our shores
http://www.mzglassarts.com/e_products/?big_id=11&small_id=&page=3&key=
Don't want to be a spoilsport but I did say "Hopefully these won't be long to hit our shores" Hopefully as this appears to be a factory
http://www.mzglassarts.com/html_info/about-us.html
So hopefully these won't be long to hit one of our favourite DHgate sellers
vapordab
Medical+FC=Recreational
I think that why we see so much of this from the Chinese retailers is because oil rigs are what are fetching the biggest bucks in the visible online market for glass, not to mention that it takes less materials to make oil rigs than combustion/vapor pieces.
loggerknees
volcano enthusiast
Recently got my knockoff PnWT from sunshine glass on dhgate. Here are some pics of it and how I use it with my volcano solid valve bags. The solid valve mouthpiece fits nicely enough against the 14mm female joint to result in a virtually airtight seal (could probably get a tighter seal with a gasket, but this seems unnecessary because I'm able to easily get enough suction to completely empty the bag.
The piece itself is solid. The internal components are slightly crooked, but this does not seem to affect the performance. If I pull too hard (which is easy to do with the lack of airpath restriction in a volcano bag) I can get a tiny amount of splashback, but the splash guard cuts down on this to the point where I don't find it to be an issue.
The piece itself is solid. The internal components are slightly crooked, but this does not seem to affect the performance. If I pull too hard (which is easy to do with the lack of airpath restriction in a volcano bag) I can get a tiny amount of splashback, but the splash guard cuts down on this to the point where I don't find it to be an issue.
Last edited:
Jahplease!
New Member
Has anyone else ordered this that can post pics? I ordered a week ago with gb-131 and a mini pendant and grav labs bee hive and have not seen any updates about any of those actually lol
vapordab
Medical+FC=Recreational
This new rig from Kathy looks pretty sexy.. I'm tempted. Must resist
http://www.dhgate.com/product/2014-newest-colorful-glass-bong-glass-water/210383688.html
This new rig from Kathy looks pretty sexy.. I'm tempted. Must resist
http://www.dhgate.com/product/2014-newest-colorful-glass-bong-glass-water/210383688.html
Shame only Kathy is selling it - I am almost tempted to purchase from her, but I have heard too many negative things. She won't get my money with her bullshit
@yingmin5 and @sunshinestore - take note - Fuck with any of us, I will stop purchasing. I believe others agree with me.
I have been watching a few new vendors with some interesting pieces, though I haven't seen anything I really want. Can someone recommend a nice rig for the E-Nano - I want/need something with a 14mm male fitting this time around
flickyourbic
Well-Known Member
I've only done one order with kathy but I was far more impressed with the other three from Sunshine. When I'm choosing I always try to go through sunshine and I've yet to try yingmin5 but hear good things. I've got another piece on the way from sunshine and there were two I wanted to order from kathy but I held off. Seems like they release new stuff every month so I'm going to wait a few weeks before ordering anything else I think.
weenstoned
Well-Known Member
Just got this piece in the mail from Alina0086
http://www.dhgate.com/product/2014-new-design-tall-10-quot-water-pipe-with/206965439.html
Ordered it for my friend's birthday. A tad janky looking, but overall a decent piece. Probably would have ordered my friend a yq42 but he has a pet tortoise. Only downside it that it came with a clear flower bowl instead of a black one, don't really care though as my buddy is none the wiser. I would say the fritted disc might be a bit nicer than the one in my fritted ashcatcher from Kathy.
I hope someone gets those grav lab recycler copies and posts pics/reviews before they stop being on sale.
Also look like DHGate has another coupon deal now. It says you can win one but I was just given the choice of either 10 bucks off of 100 or 30 bucks off of 280. So I opted for the former as I don't really plan on spending 280 bucks between mid oct and xmas.
Edit:
Figured I would post a size comparison to the D020-D. Definitely like the angle of the mouthpiece on the turtle piece. Also they claim it is 7mm thick glass and they might not be lying, the can is pretty thick. The base is also super wide and would probably be kinda hard to tip.
Last edited:
various127
Well-Known Member
@Rachett I've been looking at these two
http://www.dhgate.com/product/new-d...ngs-glass-oil/210170394.html#cart_view-4-null
http://www.dhgate.com/store/product/coin-rig-glass-bongs-glass-oil-dabbers-bear/210275081.html
The first one, I'm not sure if it has a non functioning stemless or if there is some type of diffusion beofre entering the chamber. And I saw a video of the second one(original) and it looks like it would give some pretty nice flavor. Might possibly be too small for the e-nano though
Also, how do you guys feel about the seller drinkware?
http://www.dhgate.com/product/whole...lighter-glass/209479679.html#cart_view-3-null
There's no feedback only one transaction, but it looks like that beaker may be a 14 mm and I want it
http://www.dhgate.com/product/new-d...ngs-glass-oil/210170394.html#cart_view-4-null
http://www.dhgate.com/store/product/coin-rig-glass-bongs-glass-oil-dabbers-bear/210275081.html
The first one, I'm not sure if it has a non functioning stemless or if there is some type of diffusion beofre entering the chamber. And I saw a video of the second one(original) and it looks like it would give some pretty nice flavor. Might possibly be too small for the e-nano though
Also, how do you guys feel about the seller drinkware?
http://www.dhgate.com/product/whole...lighter-glass/209479679.html#cart_view-3-null
There's no feedback only one transaction, but it looks like that beaker may be a 14 mm and I want it
MinnBobber
Well-Known Member
HI,
I have a nice bubbler but am looking for a HT hydra tube to use with my new Herbie.
I'd like to find something other than the straight tube design. Is there a HT that will fit with
Ratchett's upcoming adapter that has a mouthpiece off to the side of it?
Can you please post a link.
The straight tube/ bong design looks more cumbersome, compared to a tube with a
side mouthpiece.
I probably could manage the straight tube but I'm betting my wife wold not like it.
A happy wife = a happy life
I have a nice bubbler but am looking for a HT hydra tube to use with my new Herbie.
I'd like to find something other than the straight tube design. Is there a HT that will fit with
Ratchett's upcoming adapter that has a mouthpiece off to the side of it?
Can you please post a link.
The straight tube/ bong design looks more cumbersome, compared to a tube with a
side mouthpiece.
I probably could manage the straight tube but I'm betting my wife wold not like it.
A happy wife = a happy life
I don't think you can buy cheap china hydrotubes yet. Your best bet is to get a basic one custom made by either Doughboy Glass or Distilled Glass - They should be able to make you a very nice solid HT for under $200
(Edit, FYI - my Herbie HT adapter has an 18mm male fitting)
(Edit, FYI - my Herbie HT adapter has an 18mm male fitting)
Aaron
Well-Known Member
Someone should have one of these made. Seems pretty interesting - instagram.com/p/tk-erggZcg/?modal=true
MGG
Well-Known Member
One of the dopest non-heady pieces i've seen in a long time.
weenstoned
Well-Known Member
God damn I thought that was cool from just the still image, but the prop spinning damn that thing is art.
Baked55
Well-Known Member
Hey was wondering your guys opinion on which is the best recycler would be. Doesn't Necessarily have to vortex as long as it recycles. From following the thread it seems like probably the Kathy ratchet recycler but just wanted to be sure. Was also interested in the grab labs one but I realize no one has recieved one to give it a review yet.
DJ Colonel Corn
The Vapor Ninja
I gotta say, as most of you already know, if you're willing to buy non-American glass, DHgate is the place. Originally this post appeared on the DHgate thread, here. So If this is considered spam or double-posting then please remove it. I just thought I'd like to share my bubbler with this group as well.
This is order item code # 179567923 on DHgate's system.
It hits wonderfully, works great, and instead of $200 in the local shop I got it for $22 with free shipping.
Arrives in bomb-proof packaging, to quote another user!
Seriously folks if you need to save money this is a nice site. NOTE: I am NOT in ANY WAY involved or affiliated with DHGATE, its subsidiaries, or employees.
Here's the pic !
The tip of the mouthpiece is about six inches tall. (Looks taller, huh ?)
All praises to the FuckCombustion Forum !
This is order item code # 179567923 on DHgate's system.
It hits wonderfully, works great, and instead of $200 in the local shop I got it for $22 with free shipping.
Arrives in bomb-proof packaging, to quote another user!
Seriously folks if you need to save money this is a nice site. NOTE: I am NOT in ANY WAY involved or affiliated with DHGATE, its subsidiaries, or employees.
Here's the pic !
All praises to the FuckCombustion Forum !
MinnBobber
Well-Known Member
Pardon my ignorance but want to get this right:
So a proper HT piece would then have a 18 mm female fitting?
Thanks again
Yes, this is correct
Just stopped by my LHS today and noticed the GB-186 on display (first time seeing it IRL, recognized it immediately). Then I looked at the price tag - $275
(Note, there was no logos, didn't even have the Mobius logo!)Are you flipping kidding me?@!?!
budha707
Well-Known Member
u think they care if YOU stop purchasing?