snackmaster
Well-Known Member
This piece just works as an ashcatcher or bubbler depending on where you put the cap and mouthpiece. Cap on top + open bottom = AC. Cap on bottom + mouthpiece on top = bubbler.
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
This piece just works as an ashcatcher or bubbler depending on where you put the cap and mouthpiece. Cap on top + open bottom = AC. Cap on bottom + mouthpiece on top = bubbler.
PoopMachine
Well-Known Member
Got my replacement Nobius Stereo Faketrix from Yinmin5 today.. top perc is pretty crooked but its functional. It also was wet inside so I guess they tested this one for leaks. I wish the top perc wasnt so crooked and Im a little disappointed that they considered this a viable replacement. The first one I got had much straighter percs but alas it was busted pretty much all the way around the joint.
On the upside tho, its label free.
To the person who asked about using it with an Evo, without a Cloudbuddy (Or CloudPal), that would be a no. The stem is too close to the can for the Evo to fit.
On the upside tho, its label free.
To the person who asked about using it with an Evo, without a Cloudbuddy (Or CloudPal), that would be a no. The stem is too close to the can for the Evo to fit.
Cannabis Connoisseur
I LOVE LIFE
I'm ordering one tonight and he says itll have a label which is fine as long as the percs are straight this will be specified but may not be respected. I'm hesitant to order this piece considering as much negative feedback as its had but I'll place faith in Yingmin like a roll of Dice
PoopMachine
Well-Known Member
Even with the crooked perc, this thing stacks like crazy. For the money, I really cant complain but if you're going to make the thing, why not get the percs centered? It cant take that much extra time.
I think Im going to get some clear epoxy and a small paint brush and see if I can seal up the one that leaks like mad. Its pretty much cracked all the way around but I bet I can paint on some clear epoxy and make it look okay. The cracked one is much closer to perfect than this one, without the cracks of course
I wish this piece had a bent neck coming out of the top of the can. That would make it about perfect (With straight percs)
jambandphan03
in flavor country
try aquarium silicone, it's safe, and meant to seal glass. I found some on amazon... http://www.amazon.com/gp/product/B0002ASD2K/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1 been using this on my leaky Kathy recycler welds, so far one application has been holding, but I am sealing up pin holes, you might need to apply a bit more.
Last edited:
Cannabis Connoisseur
I LOVE LIFE
I just used the same stuff to repair a Fritted piece a couple of weeks back, works great and strong. Wish it could work on my Swagger Turbine 
Last edited:
PoopMachine
Well-Known Member
Thanks! Ill have to pick some up. I really wanted something that dries hard and not pliable but maybe I can figure out a way to squeeze this into the crack.
Why not Hxtal?
herbivore21
Well-Known Member
Hxtal is the duck's nuts for cracked glass you guys. That being said, the price of the product is more than any of the bubblers listed in this thread lol. However, a single purchase of hxtal will last ages, and many repairs (so long as they aren't ridiculous jigsaw puzzle type repairs lol).
By the way, my avatar and sig have sneak peaks at what I ended up getting for my dedicated oil rig
By the way, my avatar and sig have sneak peaks at what I ended up getting for my dedicated oil rig
PhotoRider
Diagnosed with level 11 G.A.S.
Oh, you guy's give my collection too much credit!@SprayingVomit beat me to it lol.
Link to @PhotoRider gallery. Literally it is a gallery of glass haha. Amazing. Everyone has been defeated in this contest.
http://www.amazing-scenery.com/habits/PhotoRider_Glass_Collection/index.htm?1
PLEASE DHgate make this!!
http://www.amazing-scenery.com/habits/PhotoRider_Glass_Collection/dux tripod oiler-1.htm
and this:
http://www.amazing-scenery.com/habits/PhotoRider_Glass_Collection/twisted oiler-1.htm
And so many more! I have officially just lost my mind
thanks for the positives on the Dux tripod oiler. USA made and under $200 - yes I said under $200 from a shop also. It wasn't on sale either. One of those: wow, only that much, mine things. Goes to show you can get excellent USA made glass without going hungry. DUX is a local artist to Kulture which is where I got it. This rig preforms and I would spend twice that without thinking.
flotntoke
thoroughly vaped
Even with the crooked perc, this thing stacks like crazy. For the money, I really cant complain but if you're going to make the thing, why not get the percs centered? It cant take that much extra time.
I think Im going to get some clear epoxy and a small paint brush and see if I can seal up the one that leaks like mad. Its pretty much cracked all the way around but I bet I can paint on some clear epoxy and make it look okay. The cracked one is much closer to perfect than this one, without the cracks of course
I wish this piece had a bent neck coming out of the top of the can. That would make it about perfect (With straight percs)
Not sure, but think the crooked percs come from trying to crank out too many pieces quickly. Not that they are even that sloppy putting them together. But if you've dealt with anything that needs to be very hot to work, you'll know that you have to keep it in exact same position through cooling or it will lean, flop, whatever. Again.... really not sure and have only played with hot glass a few times, but have always assumed they just didn't take care of the component until it was cool enough to have no flex.
ataxian
PALE BLUE DOT
You have more stuff than a SMOKE SHOP!
I bought more adaptors trying to keep up with @jambandphan03 which is a lost cause! She wins hand down!
You have so many water pieces I won't even think to compete with you.
My energy is in my garden.
"Cannabis is the HOLY GRAIL"!
Mister G
Deceptively Old Fart
Your confusing me with someone else. I only got 4 pieces right now and one on the way (I did break a few last year before going for cheaper stuff).
And if you count adapters and keck clips, I think YOU may be escalating this arms race. 
Mr. Gweilo 420
Dude
Just a little bit of further comment about the D0-Q. When combined with the E-nano this bubbler provided very, very fast extraction. I find that even if I pack a fairly large gong it is mostly done in one big hit with maybe a whispy one to follow. For example, a packed gong that would be good for maybe 2-3 nice milky hits and a couple of whispy ones is mostly done in one hit. I just keep liking this thing more and more everyday.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I got this locally under $50 for a full set. Hollow-foot honeycomb oil rig, flame-polished holes. Really nice on the flavor, the honeycomb isn't taking much out thankfully.
nihil
Member, Known Well
..Ahem.. joint size? 18mm?
And thank you for the feedback, I have one coming in myself. From your reviews I'm looking forward to this piece.
Mr. Gweilo 420
Dude
Yes it is 18mm female
Thanks for all the knowledge FC!
BoogerMan
Well-Known Member
Got my Starbud Frapps in from hempgarage.com today.
Ordered: 6/2/14
Delivered: 6/9/14
Very happy with shipping time and packaging and price! $102 for 2 including shipping to the US!
I absolutely love this bubbler!
Zero defects! Hard to believe for only $50
Feels like 3-4mm thick. The logos won't last long unless you don't get any solvent on it when cleaning. No big deal. I'll get a nice Starbucks sticker when it wears off
Some pics:
Ordered: 6/2/14
Delivered: 6/9/14
Very happy with shipping time and packaging and price! $102 for 2 including shipping to the US!
I absolutely love this bubbler!
Zero defects! Hard to believe for only $50
Feels like 3-4mm thick. The logos won't last long unless you don't get any solvent on it when cleaning. No big deal. I'll get a nice Starbucks sticker when it wears off
Some pics:
Unisonruss
Well-Known Member
This one is more my style: http://www.dhgate.com/store/product/two-function-9-arm-percolator-and-honey-comb/186419724.html
Anonymouse
Sith I care
We could use vinyl stickers for our special "brands" that only exist in this thread. "Fauxbius", "Hitdude" (or "Hitguy"? "Skintman"? "Shitman"?), "Pooro", and of course, "PooP", with one of the "P"s reversed like the RooR logo. Ideally they'd be copies of the original logo designs with only the text changed to the new spellings, so from a distance they look "real", but up close, are amusing.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
ataxian
PALE BLUE DOT
Your confusing me with someone else. I only got 4 pieces right now and one on the way.
I'm just messing!
Just one piece is enough really.
I do something different every session.
When I revisit some stuff it's a whole new experience.
Tomorrow the "TKO", Weeednesday D022, Thursday D020, Friday the D020 - T, Saturday the DABBERS,
Sunday ASH COLLECTORS and JHOOKS. NEXT week combinations daily.
I love your big pieces and one day I'll get some once I find a place to put them.
The D020 - Q I will order next I think?
I have this and haven't used it but 2x?
It works well I just need to rotate it more!
D020
D022
"TKO"
SMOKE SHOP SPECIAL (7mm thick glass)
D020 - T
Last edited: