Cheap High Quality Bubbler

[Mister G]

Copy of this one:

http://www.thedabstore.com/collecti.../hitman-glass-baby-funnel-cone-recycler-10-mm

Looks great!

Thanks, this Hitman one is 10mm, but I saw through Google there's a slightly larger version. Now I wonder how big the DHgate version is, it looks stretched taller a bit than Hitman. I think I'm going to message Btoc and find out.

 

[oli]

Thanks, this Hitman one is 10mm, but I saw through Google there's a slightly larger version. Now I wonder how big the DHgate version is, it looks stretched taller a bit than Hitman. I think I'm going to message Btoc and find out.

http://www.frequency.com/video/hitman-funnel-recycler-water-test/153754510/-/Facebook

Edit: Whether its the mini or not, it would be fun if they'd start selling both as a family pack

 

[Mister G]

http://www.frequency.com/video/hitman-funnel-recycler-water-test/153754510/-/Facebook

Edit: Whether its the mini or not, it would be fun if they'd start selling both as a family pack

You just had to post that video didn't you. Oh dear lord give me the strength to resist the GAS. And I thought I was done for a bit, why can't I ignore this thread, I'm stuck in it's vortex.

 

[Tweak]

And I thought I was done for a bit, why can't I ignore this thread, I'm stuck in it's vortex.

There is always the Unwatch Thread button,

 

[oli]

You just had to post that video didn't you. Oh dear lord give me the strength to resist the GAS. And I thought I was done for a bit, why can't I ignore this thread, I'm stuck in it's vortex.

Same here, very very itchy fingers...

Anyway I have sent an email requesting its height and the joint size... à suivre

 

[jambandphan03]

OK so far as I understand it, the super mini glass rigs are 10mm
http://www.dhgate.com/store/product/small-bong-mini-water-pipe-pocket-glass-bong/190893967.html

http://www.dhgate.com/store/product/1-mini-glass-bong/191263231.html

http://www.dhgate.com/store/product/new-black-small-bong-mini-water-pipe-pocket/190895046.html

The recycler I got recently is a 14mm and a bit larger than the mini rigs.

http://www.dhgate.com/store/product/new-small-bong-mini-water-pipe-pocket-glass/190892756.html

 

[pigfoot]

OK so far as I understand it, the super mini glass rigs are 10mm
http://www.dhgate.com/store/product/small-bong-mini-water-pipe-pocket-glass-bong/190893967.html

http://www.dhgate.com/store/product/1-mini-glass-bong/191263231.html

http://www.dhgate.com/store/product/new-black-small-bong-mini-water-pipe-pocket/190895046.html

The recycler I got recently is a 14mm and a bit larger than the mini rigs.

http://www.dhgate.com/store/product/new-small-bong-mini-water-pipe-pocket-glass/190892756.html

Yeah, that's fine, I will buy a new nail for it anyway. You own some or most of those
Which one do you prefer for dabbing?

 

[BoogerMan]

Did some dabs thru the D020 with the stock glass dome/nail. Pretty damn good, I like it. I want a dedicated dab rig now! Anybody got any recommendations? Small, minimal diffusion, male joint 14mm? I have been looking at the "babycake"
http://www.dhgate.com/store/product/small-bong-mini-water-pipe-pocket-glass-bong/190893967.html

I love the baby cake but it is 10mm not 14mm so not sure if it will work for you.

My girlfriend saw me looking at the starbud bubbler last night and she loved it so it looks like that is my next purchase.

Shipping to the US on smoketower is about $27 so not too bad. Plus coupon code HOT10 takes $5 off so about $72 total.
http://www.smoketower.ca/store/7-starbud-frapp-bubbler.html#intro

Still if anyone can find it cheaper that would be greatly appreciated

Just found this site. $49 + $15 shipping to US so only $64 total. Getting better!
http://hempgarage.com/products/sb7-starbud-frapp-bubbler

Also found here. No price but I will create an account later after work and try to checkout and see what happens.
http://wholesalepinnacle.com/wholesale/sb7-starbud-frapp-bubbler.html

 

[pigfoot]

I love the baby cake but it is 10mm not 14mm so not sure if it will work for you.

My girlfriend saw me looking at the starbud bubbler last night and she loved it so it looks like that is my next purchase.

Shipping to the US on smoketower is about $27 so not too bad. Plus coupon code HOT10 takes $5 off so about $72 total.
http://www.smoketower.ca/store/7-starbud-frapp-bubbler.html#intro

Still if anyone can find it cheaper that would be greatly appreciated

Just found this site. $49 + $15 shipping to US so only $64 total. Getting better!
http://hempgarage.com/products/sb7-starbud-frapp-bubbler

Also found here. No price but I will create an account later after work and try to checkout and see what happens.
http://wholesalepinnacle.com/wholesale/sb7-starbud-frapp-bubbler.html

I'm just looking for an awesome, inexpensive dab rig. Very little experience, just going on what I can find here. So much China glass, hard to pick one!

 

[jambandphan03]

so far I have the recycler at the bottom, and the one that looks like a tiny beaker bong (sent for free as they charged me a higher price for the recycler) I am waiting on that funky S shaped recycler mini rig, might be about a week since I just ordered it. So far I found the beaker mini to function just fine, it's just tiny tiny... I want to get a 10mm domeless eventually... for now I'll use the provided 10mm glass nails (tiny little things) they come with. I think for dabbing the main ting is that it functions, and you have a decent nail to use.... My mini-beaker style hits really nicely and only get some tiny droplets on my lips from splashback. I thought I posted a vid of that one a few pages back, but here it is again...

aaaah shit, another nice mini popped up only if you scroll down, it shows the S shaped one... not sure what to think there... I've contacted Kathy about the photos not matching.
http://www.dhgate.com/store/product/new-min-glass-bong-water-pipe-have-10mm-glass/190895317.html

 

[Dangus]

There looks to be a total of 7 10mm mini rigs available currently

First batch summary:

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-242#post-593222

Second batch summary:

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-248#post-594903


Feeling tempted by a couple of these, not to mention the 2 other 14mm recyclers..and now that hitman clone...sheesh!

EDIT: I also noticed the mismatching photos in that one @jambandphan03 - I like that one too...

 

[pigfoot]

so far I have the recycler at the bottom, and the one that looks like a tiny beaker bong (sent for free as they charged me a higher price for the recycler) I am waiting on that funky S shaped recycler mini rig, might be about a week since I just ordered it. So far I found the beaker mini to function just fine, it's just tiny tiny... I want to get a 10mm domeless eventually... for now I'll use the provided 10mm glass nails (tiny little things) they come with. I think for dabbing the main ting is that it functions, and you have a decent nail to use.... My mini-beaker style hits really nicely and only get some tiny droplets on my lips from splashback. I thought I posted a vid of that one a few pages back, but here it is again...

aaaah shit, another nice mini popped up only if you scroll down, it shows the S shaped one... not sure what to think there... I've contacted Kathy about the photos not matching.
http://www.dhgate.com/store/product/new-min-glass-bong-water-pipe-have-10mm-glass/190895317.html

I usually watch all your vids - I missed that one, thanks! It sure is small. Saw another post, can't remember where, they loved it.
As far as a 10mm Ti nail, I'm looking at these guys, cheap, but with documented US Gr 2 Ti:
http://www.new-vape.com/products.html

There looks to be a total of 7 10mm mini rigs available currently

First batch summary:

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-242#post-593222

Second batch summary:

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-248#post-594903


Feeling tempted by a couple of these, not to mention the 2 other 14mm recyclers..and now that hitman clone...sheesh!

EDIT: I also noticed the mismatching photos in that one @jambandphan03 - I like that one too...

Thanks for the summaries, they are handy, I bookmark them. So, I guess these minis are all pretty much equal? I just need to order one!

 

[Caligula]

Great Find, especially since I was thinking of getting this:

http://www.dhgate.com/product/1lots...r-glass-glass/189937548.html#cart_view-3-null

It be interesting to find out if both tubes arriving into the recycling chamber are dead in the middle or both a little to the right or left to create that vortex, cause I think if both are in the middle it will create some kind of conflict, but than again it could be really interesting too....

It should kick the water out to the right in order to not interfere with the vortex due to the coriolis effect. If it were to kick the water out into the return chamber in the opposite direction it would fight the natural spin of the vortex.

 

[BoogerMan]

I'm just looking for an awesome, inexpensive dab rig. Very little experience, just going on what I can find here. So much China glass, hard to pick one!

If you are good with 10mm you definitely won't be disappointed with the baby cake. Especially for only $20.

The New-Vape 10mm domeless nail works awesome on it and the nail is also only like $20-$25.

I still can't believe this setup is only $45. Plus I think Kathy has the baby cake in stock cause when I ordered one the other day for a friend it shipped the next day

Ahhhh my GB 187 and 194 are in San Francisco. It has only been 6 days since I ordered and Monday was Memorial Day so this is incredible! Thanks Yingmin. They should be at my po box within a few days. Maybe by Saturday yay!!

 

[ataxian]

@jambandphan03 & @ataxian - I think y'all will dig that little rig!

It *might* be a bit tight for the lotus, but for dabbing I am absolutely loving it.

CHeers!

Will it work as a SHATTER MACHINE?
The ASH CATCHER @jambandphan03 would be great for the LOTUS. If I knew I would get blue I'd order one.
Looks Like I have to just dab for now?

 

[Quetzalcoatl]

How do you hook a solo up to a 10mm joint? New to vapes with glass sorry if it's a silly question

You can either use one of these:

http://aqualabtechnologies.com/glas...-90-10-mm-female-to-14-mm-female-adapter.html

or try to find one that is a 10/18 female/female adapter if you use a GonG stem. The other option is attaching some silicone tubing to the Solo stem and then over the joint.

 

[Anonymouse]

It should kick the water out to the right in order to not interfere with the vortex due to the coriolis effect. If it were to kick the water out into the return chamber in the opposite direction it would fight the natural spin of the vortex.

Coriolis effect is actually negligible at this scale, but even at full size, whirlpools don't rotate any fixed direction; their rotation is determined when they form by whatever circumstances conspire to allow them to exist, and may go either way. Coriolis does provide a bias to one direction over the other, that gets more significant the larger the body of water being drained, but to make it reliably impose its influence you basically have to start with a really huge, really circular pool of artificially still water with a perfectly-centred, perfectly-circular drain. Even at toilet-bowl scale it's influence is not noticed; our flushes spin like yours.

Even if it was a universal law, though, you might have just been looking at the Southern-Hemisphere model.

 

[snackmaster]

Even at toilet-bowl scale it's influence is not noticed; our flushes spin like yours.

Maybe we're not so different after all?

 

[jambandphan03]

I'm so happy, I just figured out that my DYD nail has a tiny Ti cup on the bottom end, so I took it apart and made it fit into my 10mm mini rig nice!
I'm pretty impressed at how well that mini-beaker hits... it's so tiny!! The glass nail it came with did work, but the nail is so tiny and fragile, I wanted to find a more solid replacement. This will hold me until I get a domeless. It's a nice size cup, glad I decided to look in that spare parts drawer.

 

[Herr_Dampf]

Damn that's cute indeed

Felt like some cheap glass today, still my favourite piece from China, Kathy Hu/AllFun Line Perc to Honeycomb bubbler.

Music: Broke Free - Slam Funk - Covered in Oil
http://freemusicarchive.org/music/B...roke_For_Free_-_Slam_Funk_-_10_Covered_In_Oil

 

[pigfoot]

Coriolis effect is actually negligible at this scale, but even at full size, whirlpools don't rotate any fixed direction; their rotation is determined when they form by whatever circumstances conspire to allow them to exist, and may go either way. Coriolis does provide a bias to one direction over the other, that gets more significant the larger the body of water being drained, but to make it reliably impose its influence you basically have to start with a really huge, really circular pool of artificially still water with a perfectly-centred, perfectly-circular drain. Even at toilet-bowl scale it's influence is not noticed; our flushes spin like yours.

Even if it was a universal law, though, you might have just been looking at the Southern-Hemisphere model.

Always amazes me the amount of technological knowledge posted here. I remember a Mythbusters episode that explained that

I'm so happy, I just figured out that my DYD nail has a tiny Ti cup on the bottom end, so I took it apart and made it fit into my 10mm mini rig nice!
I'm pretty impressed at how well that mini-beaker hits... it's so tiny!! The glass nail it came with did work, but the nail is so tiny and fragile, I wanted to find a more solid replacement. This will hold me until I get a domeless. It's a nice size cup, glad I decided to look in that spare parts drawer.

Glad you found a nail! So, when you dab with a tiny rig like that, are big hits harder to take? More cough - inducing?

 

[jambandphan03]

Glad you found a nail! So, when you dab with a tiny rig like that, are big hits harder to take? More cough - inducing?

I couldn't say, I don't usually take very big dabs... I guess too much might cool the nail too quickly?? I get pretty full rips from that size nail. A domeless nail would give you more surface area for larger dabs and globs...

 

[Doug]

Thanks for the suggestion @BoogerMan! I just ordered one of those New-Vape nails for $22. What a good deal! This is going to really upgrade my new favorite little rig. The cooling and flavor out of it is impressive!

Purchase here at 420Titanium. Cool site, too!

 

[jambandphan03]

Thanks for the suggestion @BoogerMan! I just ordered one of those New-Vape nails for $22. What a good deal! This is going to really upgrade my new favorite little rig. The cooling and flavor out of it is impressive!

Purchase here at 420Titanium. Cool site, too!

cool let us know how that works out... I won't be purchasing a nail any time soon, since I can use my DYD nail, but I'm curious to see how those domeless function on the mini rigs.

 

[ataxian]

You can either use one of these:

http://aqualabtechnologies.com/glas...-90-10-mm-female-to-14-mm-female-adapter.html

or try to find one that is a 10/18 female/female adapter if you use a GonG stem. The other option is attaching some silicone tubing to the Solo stem and then over the joint.

Oregon Glass Blowers has all kinds of adapters.