Cheap High Quality Bubbler

lazylathe

Almost there...
4ODueEo.jpg

No LOGOS!
$32? Number 6!
@Sleepin in CA I may be one less SOLO because of you!
@Vitolo I got this because of you!
@lazylathe my new DABBER!

Linky, link please!!!
Looks like a good addition to the glass!!
 

Delta3DStudios

Well-Known Member
Accessory Maker
I've been interested in the D020-W and after hearing the complaints about the small mouthpiece hole, I wonder how hard it would be wrap some sandpaper around a tapered object and try to gradually sand the hole larger/wider. Anyone want to risk it?

I wouldn't - just imagine all that fine glass dust you'd risk ingesting (even after washing, there's always a chance)! I remember reading over on grass city about some idiot who's friend made a pipe out of a copper tube, and did a 'dry hit' to see how well sealed the air chamber was. Inhaled a bunch of copper dust into his lungs - took months before he could breath normally. Couldn't vape let alone combust for weeks (too painful).

I think your better bet would be to use a torch to soften the metal and use something to enlarge the whole while it's malleable. But I'm not a glass blower, so I have no clue.

Or, better yet, don't buy it - there are plenty of other similar affordable glass pieces on the market.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Hey, does anyone know where I can get a cheap glass base (oil rig, beaker, submarine, etc) with an interchangeable mouthpiece? I'm looking for ways to connect my new helix mouthpiece to a basic base (maybe a perc, maybe a straight bubbler, maybe a downstem, not too picky).

Looked through the sunshine store, and Yingming's collection. Nothing really stood out to me. Apollo glass is a bit pricey for what I'm looking for. GBD is also too pricey.

Turbine AC and the Helix should be here tomorrow! 7 days from order to delivery is sweet at these prices!
 

PoopMachine

Well-Known Member
@jambandphan03 Actually one of Kathy's tricks is that the fake tracking number she issues will show that your package has been sent and it is usually at or has just left a sort facility. This is her scam. She is buying time in an attempt to get the product and then resell it to you. I advise cancelling asap. One thing about her is that once you call her out she should refund you quite quickly. In my experience when one gets fucked by an Aliexpress or Dhgate vendor you should eventually get your money back. It is the time and energy that can never be refunded. Not to mention that is not a very cool thing to do to someone suffering from GAS!


I didnt.. but whatever.. it was only about $10.00. Im not harping on it, I just dont want to see anyone else get taken.
 
Last edited:

Doug

Just passing time
I'm happy to see that my tracking from Kathy updated today, too! I expect it to take a long time, but I think it'll all work out.
 
So I have struck a deal with Yingmin. I will keep the 188 and I paid him $20 (half price) for the 189. I should have it on Monday or Tuesday I guess.
All in all I think that is a very fair and reasonable resolution. It is great for FC members as well as it shows us Yingmin is a good guy that we can trust.
Does anyone have a link to a 18mm male to female adapter? GBD won't ship to my location :(
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
So I have struck a deal with Yingmin. I will keep the 188 and I paid him $20 (half price) for the 189. I should have it on Monday or Tuesday I guess.
All in all I think that is a very fair and reasonable resolution. It is great for FC members as well as it shows us Yingmin is a good guy that we can trust.
Does anyone have a link to a 18mm male to female adapter? GBD won't ship to my location :(
Good to hear! Does Green Buddha?
http://greenbuddhashop.com/ADAPTERS_c7.htm

Or Mariposas2??
http://www.ebay.com/sch/mariposas2/m.html?_nkw=&_armrs=1&_ipg=&_from=

Edit-
Looks like my 187 left Shenzhen on May 13th passed US customs May 14th and possibly out for delivery May 16th at least I got my fingers crossed! That's unreal quick! Thanks @yingmin5
 
Last edited:
I read the thread

Acquired GAS

Torn between D020-T & GB-187. We need a vid of the D020-T!

What kind of a perc is that on the T anyways? Disc or Slit-Disc? It's not a ratchet... and it's not honeycomb.

Looks like I maybe might get more diffusion with the 187, I really can't decide if that's a good or bad thing though. lol

Someone tell me which to buy. Please.
 
Last edited:

flotntoke

thoroughly vaped
Really liking the performance of the D020-W. Know this one has already fallen off the top of the heap here, but wanted to share my impressions.

The small hole of the mouthpiece makes cleaning a pain in the ass, but works great! The reduced airflow gives better control of your draw - and allows for slow, smooth diffusion. IMO this lets you milk her slow and keep more flavor while still cooling and moisturizing the vapor. Drag is minimal and seems more related to airflow at the mouthpiece than diffusion. Percs are not all exact same width, but close enough that most fire every time. My second one percs well too, but only water tested it. The mouthpiece hole is much smaller than the other, so am anxious to see if it performs as well. Water testing was a bit different, but seems like hitting it will be about the same.

Size is a good compromise of volume and ergonomics. A little more volume would be good, but this baby feels nice in your hand and is easy to handle with a nano perched on top. Like it much better than the D020 because of increased volume and sidecar. Very nice to have the nano off to the side instead of right at the tip of your nose.

It seems to be about 1/2 (maybe a little less) the volume of a jhanpixel UFO showerhead and the mouthpiece is on the other side of the can. Both took me about a session to get used to. If prices were the same, the jhanpixel would be my choice hands down. But, at 20% of the price I think I might opt for the D020-W. Not getting rid of either anytime soon - as similar as they are they both have their benefits and shortcomings.

Very glad I picked these up! Will be replacing my D020 as a travel piece, and will definitely get some use here at home. Just have to get over the fact that it takes a while to clean. IMO, at $30 shipped, this is another giant-killer from DHGate.
 

Tweak

T\/\/34|<
Really liking the performance of the D020-W.

Same here. It's seeing the most action out of all my D020 family.

I'm not sure why, but side by side with the D020-D (same perc) the D020-W seams to stack easier and higher. Maybe it is the mouthpiece, idk.

Edit-
Looks like my 187 left Shenzhen on May 13th passed US customs May 14th and possibly out for delivery May 16th at least I got my fingers crossed! That's unreal quick!

Really? My Yingmin5 order shipped the exact same dates but is either still stuck in Shenzhen or on a slow boat.

I googled Shenzhen to see if it was a shipping port City, found they had some severe flooding last weekend, :(.
 

equatorgringo

Well-Known Member
Same here. It's seeing the most action out of all my D020 family.

I'm not sure why, but side by side with the D020-D (same perc) the D020-W seams to stack easier and higher. Maybe it is the mouthpiece, idk.



Really? My Yingmin5 order shipped the exact same dates but is either still stuck in Shenzhen or on a slow boat.

I googled Shenzhen to see if it was a shipping port City, found they had some severe flooding last weekend, :(.

I have the same issue with my 186, ordered and marked shipped last Friday. I contacting Lamin at Yingmin5 last night and he said don't worry it's on its way to USA and that it's very normal for the tracking to show it still in China until it all of a sudden shows it in the states and then within a couple of days at your door.
 
earlier today there was someone on here advertising and now that post has been deleted as I figured it would but what the hell is up with people advertising medicine for sale is that some kind of trap?
 
Cannabis Connoisseur,

Pickz

Vapes on vapes on vapes!
I ordered mine during the rush after reviews as well and it is pretty close. My tracking has been just like SSVUN~YAH's except for I'm not sure when mine will be delivered (to my door). It is in the US and it should be a few days left for me. :2c:
 
Last edited:

Mister G

Deceptively Old Fart
I have the same issue with my 186, ordered and marked shipped last Friday. I contacting Lamin at Yingmin5 last night and he said don't worry it's on its way to USA and that it's very normal for the tracking to show it still in China until it all of a sudden shows it in the states and then within a couple of days at your door.

I can confirm that all 3 of my DHgate purchases behaved this way in the tracking system.
 

alex h

Well-Known Member
Thanks Yingmin for the speedy delivery and sending me a 187 without a logo! I ordered on 5/8 and received it today. The piece is an amazing value for the price. Its almost comparable to my mobius ion matrix. The only thing that seems a little bit off is the recessed joint, but I'll do some testing tonight.

mOaLUcL.jpg
5K8lSLw.jpg

jRNOCVR.jpg
 

blankrider

Well-Known Member
Looks so much better without logos. Does anyone know if he has any of the 189 without logo? Also are there any cheap recyclers out there with female joint? I know that I can use adaptors but I would really prefer not to. These days I pretty much just vape and do dabs with a knock off quartz banger and now pieces with male joints just frustrate me. Here is a link if any of you want some highly functional and affordable quartz
http://m.ebay.com/itm/251506153123?nav=SEARCH
 
Top Bottom