Cheap High Quality Bubbler

[Ramahs]

You guys talking about TAG made me go glance at their site again, and I just ordered one of these on sale for $59:

https://www.thickassglass.com/produ...e-diffuser-14mm-female?variant=39507261292579

 

[Lobby]

How can I find pieces that have some draw resistance? I like draw resistance that is like sucking soda thru a straw. My favorite piece right now has a 90 degree bend in the neck which i think gives it the resistance i like. I wonder if the Grav Uplines have some resistance? The Bubbler seems to have a bit of a pinch at the end of the mouth piece and the Water Pipe has the thin tube and small mouth piece that I think would cause some resistance. I could be wrong though.

 

[LesPlenty]

How can I find pieces that have some draw resistance?

The following has a LOT of draw resistance, the reason I do not like it much, but if that is what you want,

With A Sintered Disc And Turbo Borosilicate Glass Hookah GB 228 F 19mm Connector From Yingmin5, $27.96 | DHgate.Com

Wholesale brand with a sintered disc and turbo borosilicate glass hookah (gb-228-f) 19mm connector for everyday discount prices on DHgate.com! Best quality and cheapest price!

www.dhgate.com

 

[Texus]

How can I find pieces that have some draw resistance? I like draw resistance that is like sucking soda thru a straw. My favorite piece right now has a 90 degree bend in the neck which i think gives it the resistance i like. I wonder if the Grav Uplines have some resistance? The Bubbler seems to have a bit of a pinch at the end of the mouth piece and the Water Pipe has the thin tube and small mouth piece that I think would cause some resistance. I could be wrong though.

There is some resistance in the Grav Upline Bubbler, possibly my favorite piece, but not sure it will have the resistance you are looking for. Upline Water Pipe has more resistance but also has a really unique chug that makes it not the most versatile piece. Works better with some vapes than others.

 

[Kudzu407]

So the same specs as the Large Inline. What did the pictured one run?

It was a factory second. The only thing I could find was a small dent in the can where the percs hit the can. It was $85 shipped.

 

[cybrguy]

It was a factory second. The only thing I could find was a small dent in the can where the percs hit the can. It was $85 shipped.

That's a good deal. It is very similar to the Inline which I really enjoy. It has that thick base all the TAGs have and I wonder how much it might add to the weight. My 9" super slit donut, for example, is a very heavy piece tho it has a 75mm can.
Out of curiosity I just weighed my Large Inline (had a triple beam about) and it's 640 grams empty. If you have a way to weigh it I would love to know if it is a lot heavier tho most won't have a scale that goes over a pound other than a bathroom scale that would not be accurate at that low a weight. Most of us old farts didn't even keep our triple beams. I, on the other hand, struggle to get rid of anything that was once useful...

 

[Shit Snacks]

How can I find pieces that have some draw resistance? I like draw resistance that is like sucking soda thru a straw. My favorite piece right now has a 90 degree bend in the neck which i think gives it the resistance i like. I wonder if the Grav Uplines have some resistance? The Bubbler seems to have a bit of a pinch at the end of the mouth piece and the Water Pipe has the thin tube and small mouth piece that I think would cause some resistance. I could be wrong though.

The grav upline bubbler clone does indeed have restriction with that mouthpiece, but you might like something larger with more restriction... Narrow mouthpieces aren't easy to find, but they can be found, straw type mouthpieces, or a swappable mouthpiece... I would skim backwards, I think you might find a piece you like a lot, I've shared so many here... If the goal is to find restriction, that shouldn't be so hard really? Many options

 

[Boreus]

If you live in a legal/medical state reminder to check your dispensary for deals. I scored a couple pieces for under $20 recently.

 

[Kudzu407]

If you have a way to weigh it I would love to know if it is a lot heavier tho most won't have a scale that goes over a pound other than a bathroom scale that would not be accurate at that low a weight.

I have a digital scale that will work. I will try to remember to weigh when I’m in the shop tomorrow.

 

[Lobby]

The grav upline bubbler clone does indeed have restriction with that mouthpiece, but you might like something larger with more restriction... Narrow mouthpieces aren't easy to find, but they can be found, straw type mouthpieces, or a swappable mouthpiece... I would skim backwards, I think you might find a piece you like a lot, I've shared so many here... If the goal is to find restriction, that shouldn't be so hard really? Many options

Thanks for the info. I’m going to order both of the Upline clones and probably the Sheldon Black clone.

There is some resistance in the Grav Upline Bubbler, possibly my favorite piece, but not sure it will have the resistance you are looking for. Upline Water Pipe has more resistance but also has a really unique chug that makes it not the most versatile piece. Works better with some vapes than others.

Thanks.

The following has a LOT of draw resistance, the reason I do not like it much, but if that is what you want,

With A Sintered Disc And Turbo Borosilicate Glass Hookah GB 228 F 19mm Connector From Yingmin5, $27.96 | DHgate.Com

Wholesale brand with a sintered disc and turbo borosilicate glass hookah (gb-228-f) 19mm connector for everyday discount prices on DHgate.com! Best quality and cheapest price!

www.dhgate.com

Thanks for the suggestion but while nice looking sounds like too much resistance.

 

[Md_Hybrid]

I won't get to test this out until tonight but it looks like a good time to me

 

[cybrguy]

Does anyone know if the downstem for the D022 will fit in that inexpensive Sheldon Black clone? Or if anyone has the SB clone please measure the downstem. I think the joints are right, I'm just not sure about the length of the downstem.

 

[Kudzu407]

If you have a way to weigh it I would love to know if it is a lot heavier tho

Sorry it turns out my Amazon digital scales max weight is not as advertised. I am shocked!

 

[LesPlenty]

Does anyone know if the downstem for the D022 will fit in that inexpensive Sheldon Black clone?

Sunshinestore told me yes so I got one...and it bottomed out in the Sheldon knock-off and I had to pack the joint (I used heat-shrink on the male 29mm joint) to lift it enough to clear. So it sounds like a gamble, I think I got a refund from memory. I also never use it as it just does not sit right so I just use the downstems from other bongs with more water to reach the perc.

 

[cybrguy]

Yeah, I was afraid of that. I guess I'll pass. I am just not a fan of tree percs, mostly due to the cleaning.

Not like I need more glass but... you know.

 

[Ramahs]

I won't get to test this out until tonight but it looks like a good time to me

I like the look of that, but I really shy away these days from pieces that don't have a wider base for stability.

 

[Shit Snacks]

If alternative down stems are needed, these holed seem quite nice, they have these slitted too not sure if they will be the right sizes necessarily though...

Same great shop that has the grav upline bubbler, also they have the tall upline rig in the grav style here (seems nicer than other DHg versions from other sellers) only like $34 with coupons now...

Oh and they also have this ashcatcher version of the circ perc to ladder perc of the upline bubbler here too...

 

[Shit Snacks]

Thanks for the info. I’m going to order both of the Upline clones and probably the Sheldon Black clone.

Sorry for the back-to-back, but the edit window is gone, and I wanted to reply to you again, because I filled up and am using my JCglass upline bubbler again (fortunately the 18/14 to 18/14 drop-down I got from curated flame actually fits so I can now use it like my others!) and I am definitely being reminded how restricted the airflow is on this piece... I like using it best with my Tetra since it is one of my most free-flowing vapes to compensate, also very effective with Halo though, decent results with TM, FW7, and SplinterZ too... I really need to try it with my Vapman actually, it is pretty good with the xmax v3pro and logs I know though as well!

 

[camobanana]

How can I find pieces that have some draw resistance? I like draw resistance that is like sucking soda thru a straw. My favorite piece right now has a 90 degree bend in the neck which i think gives it the resistance i like. I wonder if the Grav Uplines have some resistance? The Bubbler seems to have a bit of a pinch at the end of the mouth piece and the Water Pipe has the thin tube and small mouth piece that I think would cause some resistance. I could be wrong though.

This pulsar tube has most resistance of all my pieces, I love it. It's been my daily for a minute.
I'd wait for a sale though. It's a quality piece that is thicker than most DHGate glass, but it's still china glass.

Pulsar Dual Showerhead Straight Tube Bong

This straight tube glass bong stands 16 inches tall and feature a dual showerhead percolator and a vortex slitted ice catcher. Made from quality borosilicate glass and includes a 19mm glass herb slide.

www.pulsarvaporizers.com

 

[LesPlenty]

my JCglass upline bubble

Which one is restrictive, the BU062(8.5") or BU073(13"), or both?
I have been close to getting the 8.5" a few times.

 

[Shit Snacks]

Which one is restrictive, the BU062(8.5") or BU073(13"), or both?
I have been close to getting the 8.5" a few times.

The 8.5" is the one I am talking about, that is the one I have, but now I am curious about the 13" (and the ash catch too) damn it!

I think the 13 is also a bit restrictive if I remember correctly, but I would expect the ashcatch to be a bit better with that circ perc instead of the holed perc below the ladder?

Like the hammer version from Biao here it seems to have a bit more of a shower head perc with slits only on the bottom:

 

[LesPlenty]

Like the hammer version from Biao

Man, I nearly purchased that..again until I saw it has a 10mm joint...again!
I might give the 8.5" a miss, I am sick of restrictive bongs at this time.

 

[Shit Snacks]

Man, I nearly purchased that..again until I saw it has a 10mm joint...again!
I might give the 8.5" a miss, I am sick of restrictive bongs at this time.

I am fairly certain it was @RustyOldNail who ended up buying it, because they confirmed by message that it was actually a 14 mm joint in fact! So you should hit them up, because they clearly have not changed the listing lol but you can confirm search here?

 

[Lobby]

That’s a nice looking piece. Thanks for pointing it out

 

[RustyOldNail]

I am fairly certain it was @RustyOldNail who ended up buying it, because they confirmed by message that it was actually a 14 mm joint in fact! So you should hit them up, because they clearly have not changed the listing lol but you can confirm search here?

Yup…. 14m female. I use it a lot, even with a CLEAR (non-ground) 10mm adapter for DV’s, etc.