Cheap High Quality Bubbler

[flotntoke]

If I had to chose between those two (as second to the D-cycler ), I'd go with the second based on fact that kathy0577 has an OK rep here. Not sure about that angled inline perc, and the glass looks pretty thin - even in pictures. Would be willing to bet from pictures they are the exact same piece blown in same shop. Just being sold by different vendors. All the more reason to just go with kathy.

 

[Andrew26]

@flotntoke Yea I see what your saying about the inline per.. kinda looks sketchy lol I'm not to worried about the glass being to thin as I'm not a clumsy person. I just wanted a nice little small recycler, nothing to big, I was hoping someone here had one.
I'd go with the one from ccg but I wasn't looking for a rig that big. So I thought the one from kathy would be good but it would be nice to see how it performs!

 

[ataxian]

@flotntoke Yea I see what your saying about the inline per.. kinda looks sketchy lol I'm not to worried about the glass being to thin as I'm not a clumsy person. I just wanted a nice little small recycler, nothing to big, I was hoping someone here had one.
I'd go with the one from ccg but I wasn't looking for a rig that big. So I thought the one from kathy would be good but it would be nice to see how it performs!

kathy057 very good vendor!

5mm minimum thickness

Small Can = portable
Medium Can = Log
Large Can = Desk Top

1200's we discovered Glass!

 

[Andrew26]

5mm minimum thickness is actually pretty good. @ataxian do you know at all if this piece would perform well?

http://m.dhgate.com/product/2015new-glass-bong/240328669.html#mvdpd-3-9|null:01

 

[ataxian]

5mm minimum thickness is actually pretty good. @ataxian do you know at all if this piece would perform well?

http://m.dhgate.com/product/2015new-glass-bong/240328669.html#mvdpd-3-9|null:01

@Andrew26 It's cheap and pretty.
It doesn't matter if I like?
I like bigger water tools than most.
Lots of people like little bubblers for concentrates.
I use a big can for my SHATTER.

D-Series I use portables.

If I like it I buy it!

Portables that I have tried do not taste as good as a plug-in!
The small can bubblers I bought for concentrates. (hate it)
I use my WILSON or FC186 for SHATTER.

20 is my last count of rigs!

I had so many break?

 

[Silat]

the one in the last link is working great for myself as a vape bubbler. fill the water level up past the bottom of the center can just a little bit for best results and pressure.

Can you post a picture or video of where you have the water level?

 

[C No Ego]

Can you post a picture or video of where you have the water level?

sorry no camera, when you get the piece you'll see the round inner barrel shaped chamber that is hollow inside. fill the water up so it goes past the bottom of the barrel some but not to much( 1/4 inch) . its the perfect pressure I've found at that water level. to low on water and the pull ( pressure) is lessened and to much water means water in your mouth. I can explain better when you have the piece in your hands and can see the design... peace

 

[FlyingLow]

Haven't tried either one of those recyclers but those tilted in line percs dissuade me right away.

It will never fire evenly unless tilting the can, otherwise you are going to have to pull hard as hell to fire any of the bottom slits.

 

[Andrew26]

@flotntoke Hey buddy So I'm starting to second guess that tilted inline perc and I don't think it'll be that good. Now I'm starting to consider the dcycler from ccg as a good vortex recycler. Is this the dcycler?

It actually looks pretty sweet from the video.

 

[wildything]

@flotntoke Hey buddy So I'm starting to second guess that tilted inline perc and I don't think it'll be that good. Now I'm starting to consider the dcycler from ccg as a good vortex recycler. Is this the dcycler?

It actually looks pretty sweet from the video.

Yes that is it, it's a highly regarded recycler as far as function goes and has been a staple for dhgate recyclers for over a year.

 

[Andrew26]

Does it matter which one I go with? There's one from ccg that I like it's the 2016 version that has there ccg logo on it
Then there's the original version that has like over 1100 orders... I wanted to get the one with the logo, will it still be the same quality? I'm assuming yes

 

[CalyxSmokr]

Yes that is it, it's a highly regarded recycler as far as function goes and has been a staple for dhgate recyclers for over a year.

out of curiosity...can you think of a good one that size but with a (preferred 18) female?
just checking thx

 

[wildything]

Does it matter which one I go with? There's one from ccg that I like it's the 2016 version that has there ccg logo on it
Then there's the original version that has like over 1100 orders... I wanted to get the one with the logo, will it still be the same quality? I'm assuming yes

I would try the newer one as the picture looks thicker than original which was a problem wit the original being too thin on the mouthpiece. Quality from ccg is on the higher end for dhgate.
And @CalyxSmokr I know that ccg has a fab double recycler with an option for 18mm female instead of the normal 14. I can't couch for it but videos look good but I think it's a little bigger than the d-cycler from them.

 

[Andrew26]

@wildything yeah I see what your saying about the mouthpiece. I'll get the newer 2016 version
And are you talking about this piece?
http://m.dhgate.com/product/10-2-qu...r-amazing/380805241.html#st-storehome-19-null

I really really wish they made the dcycler I want in a 18mm male joint!! All my bangers are 18mm female
I guess I'd just have to buy a new banger and season all over again..

 

[wildything]

@wildything yeah I see what your saying about the mouthpiece. I'll get the newer 2016 version
And are you talking about this piece?
http://m.dhgate.com/product/10-2-qu...r-amazing/380805241.html#st-storehome-19-null

I really really wish they made the dcycler I want in a 18mm male joint!! All my bangers are 18mm female
I guess I'd just have to buy a new banger and season all over again..

Yes, that's the fab double recycler I mentioned. You might be able to get a custom d-cycler with 18mm instead of 14 if you ask they are a very friendly and cooperative store. You could also get a low pro 14 to 18mm adapter for cheaper than a new banger as well.

 

[Andrew26]

@wildything Yeah that double recycler looks pretty nice. I tried searching lowpro 14 to 18mm on dhgate and I didn't get anything. Could you provide a link to one please?

 

[flotntoke]

@wildything yeah I see what your saying about the mouthpiece. I'll get the newer 2016 version
And are you talking about this piece?
http://m.dhgate.com/product/10-2-qu...r-amazing/380805241.html#st-storehome-19-null

I really really wish they made the dcycler I want in a 18mm male joint!! All my bangers are 18mm female
I guess I'd just have to buy a new banger and season all over again..

Yeah, me too... but it's not that hard to adjust. Just pick up a 14 mm F > 18mm F adapter. IIRC it wasn't too hard to find one. Bake Bros has them on ioffer for 12.99. OGB has them on his site for $14. Depending on S&H, I'd go with OGB. Makes it easier to clear if you like without burning fingers, too.

EDIT: DOH! Just realized you're looking for 14F > 18M. They're not too hard to find either, and might as well leave the others here for anyone else searching. OGB even cheaper for $10, and Bake Bros on iOffer for same $12.99. Or, you could spend time searching on DHGate for them. I'd just go with the OGB, myself. Ain't worth the work to get a crappy Chinese one for a couple bucks less IMO. Unless you're looking to pick up a handful like these.

Glad to see you're on a better track for a recycler. Was anxious to see if those cheap pink ones (or whatever color) were even worth it, but better to see you just get a decent one.

 

[wildything]

@wildything Yeah that double recycler looks pretty nice. I tried searching lowpro 14 to 18mm on dhgate and I didn't get anything. Could you provide a link to one please?

http://www.dhgate.com/product/low-pfofile-adapter-18mm-male-to-14-female/376624548.html here's the adapters I just ordered. Min of 5 and there is 1 on ebay from china for $3 something but the 5 for $9 is a pretty good deal

 

[Silat]

sorry no camera, when you get the piece you'll see the round inner barrel shaped chamber that is hollow inside. fill the water up so it goes past the bottom of the barrel some but not to much( 1/4 inch) . its the perfect pressure I've found at that water level. to low on water and the pull ( pressure) is lessened and to much water means water in your mouth. I can explain better when you have the piece in your hands and can see the design... peace

Great explanation Thanks again.

 

[Andrew26]

@flotntoke @wildything Awesome dude thanks for the links man The ones from dhgate, the shipping will be alot less since I live in Canada. Ogb will charge more for shipping than the adapter by itself lol so I'd probly want to order from dhgate since the shipping is peanuts.
Do the ones from dhgate fit nicely? I wouldn't want to order 5 crappy made adapters that don't fit properly lol.

After looking at what people were saying about that smaller recycler I initially wanted ( i was actually pretty stoked about it lol ) and not seeing to many reviews and no videos and that crappy tilted inline perc I was like .... so I figured I'd go with one that really works and had lots of reviews! I wish someone here bought one so I could truly know how those smaller ones worked. Oh well imma just buy that newer dcycler and I'll msg ccg and see if they can make one in a 18mm male joint instead

 

[_WaxPayne_]

Went home and the FC-710 has arrived safely and just as elegant as I remembered it ! I never had a enail when I owned the 710 earlier but it's quite nice . Damn how I missed the flav that this bong puts off. And those nice huge rips that slap you right in the cortex . Love it .

If you're wondering wtf that little doll is its a Funko Pop my friend makes custom versions of them. Just got it in the mail with the 710. Much respect to anyone who can guess who it is. Give ya a hint : " Getcha Pull"

 

[wildything]

@flotntoke @wildything Awesome dude thanks for the links man The ones from dhgate, the shipping will be alot less since I live in Canada. Ogb will charge more for shipping than the adapter by itself lol so I'd probly want to order from dhgate since the shipping is peanuts.
Do the ones from dhgate fit nicely? I wouldn't want to order 5 crappy made adapters that don't fit properly lol.

After looking at what people were saying about that smaller recycler I initially wanted ( i was actually pretty stoked about it lol ) and not seeing to many reviews and no videos and that crappy tilted inline perc I was like .... so I figured I'd go with one that really works and had lots of reviews! I wish someone here bought one so I could truly know how those smaller ones worked. Oh well imma just buy that newer dcycler and I'll msg ccg and see if they can make one in a 18mm male joint instead

Oh yes the quality of the adapters is very good. There should not be any problem with it not fitting

 

[VAPEHUNTER]

...... Much respect to anyone who can guess who it is. Give ya a hint : " Getcha Pull"

That is the sickest little Dime Bag Darrell I've ever seen!
"COWBOYS FROM HELLLL!!!"
Oh, nice 710 too.

 

[_WaxPayne_]

That is the sickest little Dime Bag Darrell I've ever seen!
"COWBOYS FROM HELLLL!!!"
Oh, nice 710 too.

Fuck yea !!!

Thanks man. My buddy makes em. This was his first one he ever made and its awesome.

 

[Andrew26]

Hey guys I messaged cleanclearglass about a few things and it's been about 2 days now and I haven't received a response yet. I even messaged them lastnight and still nothing...normally other sellers reply within 20 minutes, does it usually take this long for ccg to reply?