Cheap High Quality Bubbler

gaseous_clay

Well-Known Member
I'm feeling the itch for a new piece. Here's the thing though, I want to use it with my Arizer Solo for now, but in the future I might buy a Cloud Evo.

I have the D020-D and really like it, but I love seeing larger more technical pieces. This is why I'm really eying the FC-Mod. Maybe some parts would also work on the D020-D?
The ash catcher should work. I have the version with a side car mouthpiece & it clears by about 1/8", but it does clear.
 
gaseous_clay,

PoopMachine

Well-Known Member
Dang that sucks. I ordered a couple things on the Wednesday or Thursday before CNY and one managed to ship out and is in Canada so I should probably get it in the next few days but the other did not and still has 7 days to ship.

Don't think I ever had any major problems with Kathy but their store is definitely in the lower tier customer service wise and they'd have to get a pretty amazing piece for me to order from there again when there's vendors out there offering basically North American level customer service.

I ordered the Toro incycler knockoff... Id totally buy one from somewhere else if I could find a good one. I have little faith Ill ever see one from Kathy. She is 2/4 in getting stuff to me at this point.
 
PoopMachine,

Alan Partridge

Smell my cheese
I ordered a FC MOD and FC Mouthpiece on Jan 25.

Then I ordered the FC 187 a week later.

FC 187 turned up after about 9 days.

FC MOD was posted by Steven on Feb 1 and hasn't turned up yet :( that was the one I was looking forward to.
 
Alan Partridge,
  • Like
Reactions: wildything

weenstoned

Well-Known Member
Snqo3cn.jpg


Got my FC-mini from hookahbong which didn't come with a cap but for $25 a pretty good deal. Waiting on a cap though is killing me. Guess I have plenty of other pieces. Did take one slightly hot dab which wasn't harsh despite being hot enough to not really need a cap. Furthers my belief that Steven is just a reseller and has no factory.
 

weenstoned

Well-Known Member
Yeah the airflow on those direct inject e-nails is definitely restrictive. The hybrid ti/quartz is way more open, you'll need to switch to a flat coil unless you're just torching. Both are pretty good, airflow is basically the biggest difference I would say. The hybrid probably vaporizes more effectively but hard to say how much of a difference you'd actually tell. Both got me dabbed out.
 

pigfoot

Dabs are vapor too!
so i have a few of the hymanquartz purity direct inject domeless enails and notice that theyre well.. a bit restrictive with air flow. is that just the way it is with that particular nail or is it worth switching to this new HE hybrid quartz/Ti nail i'm seeing?

oh shit! http://m.dhgate.com/product/2016-6-...ail-titanium/373183422.html#s1-2-1|4272038791
Yeah the airflow on those direct inject e-nails is definitely restrictive. The hybrid ti/quartz is way more open, you'll need to switch to a flat coil unless you're just torching. Both are pretty good, airflow is basically the biggest difference I would say. The hybrid probably vaporizes more effectively but hard to say how much of a difference you'd actually tell. Both got me dabbed out.

I have the hybrid nail too. Tastes about the same as my quartz banger. Definitely vaporizes well, and thoroughly. Plenty of airflow. On mine, the threaded part does not have enough room to hold an enail coil. But, it works great with a torch.
 
pigfoot,
edit: I pulled the trigger on a THC Slimer juice box rig that was 70% off, so it only set me back about $34 lol.. let's see if these things are decent. To those who want to take the plunge as well, here's the seller's page: http://www.dhgate.com/product/2015-...e/267056817.html#myaccount_orderdetail-1-null

Hey, I was looking at slimer juice boxes on dhg earlier and I read a bad review you should be aware of. The guy was really pissed because he said he used a 3M lead test kit and found it was lead paint. Not saying you have one from that batch but you might want to test it.

I just went back to look for the review to copy it but can't find it. Definitely was a clone of that box though.
 

pigfoot

Dabs are vapor too!
Hey, I was looking at slimer juice boxes on dhg earlier and I read a bad review you should be aware of. The guy was really pissed because he said he used a 3M lead test kit and found it was lead paint. Not saying you have one from that batch but you might want to test it.

I just went back to look for the review to copy it but can't find it. Definitely was a clone of that box though.

https://www.reddit.com/r/CannabisExtracts/comments/46c02i/beware_of_lead_paint_seller_brotherfeng/
 

ezd

Member
Is there a functional difference between the DH glass and $500-$1k+ American made pieces? I'm talking functionally here, It's obvious the fit and finish aren't the same.

I currently have an FC-710 which is great and I have several other DH pieces on the way. However, I'm also shopping around higher end recyclers like Gordo Scientific. I'm just looking for an honest opinion on if it's that big a difference.

Sorry if this isn't the thread to be asking but it seems like you guys have a lot of experience with DH products and I'm betting a lot of you also own high end pieces too.
 
ezd,

galacticdad

Well-Known Member
Hey, I was looking at slimer juice boxes on dhg earlier and I read a bad review you should be aware of. The guy was really pissed because he said he used a 3M lead test kit and found it was lead paint. Not saying you have one from that batch but you might want to test it.

I just went back to look for the review to copy it but can't find it. Definitely was a clone of that box though.

i actually read that same review a few days ago when i went back to check. good thing i used that piece for maybe a day, then i put it away. the function wasnt anywhere near the original for me to use it, really. confirmed lead paint just seals the deal for me. good looking out!
 

MinnBobber

Well-Known Member
My experience in rough terms/figures is:

Chinese glass : American quality glass
-- Function of Chinese is typically 75 to 90% of American. If you throw out the reject Chinese pieces which get sent but are really sub sub par /rejects
-- at a cost of from 1/5 to 1/10 of American glass.

I kind of used max of $500 or $600 for American glass as beyond that you mostly get artistic/cosmetic value.

So, like any product that last/top 10 to 20% of function costs a lot.
For me, my glass lust tops out at about Mobius level of $400ish. ;)
I doubt I'd ever buy a $600+ piece
 

YungLeaner

Well-Known Member
My experience in rough terms/figures is:

Chinese glass : American quality glass
-- Function of Chinese is typically 75 to 90% of American. If you throw out the reject Chinese pieces which get sent but are really sub sub par /rejects
-- at a cost of from 1/5 to 1/10 of American glass.

I kind of used max of $500 or $600 for American glass as beyond that you mostly get artistic/cosmetic value.

So, like any product that last/top 10 to 20% of function costs a lot.
For me, my glass lust tops out at about Mobius level of $400ish. ;)
I doubt I'd ever buy a $600+ piece
Would have to agree with MinnBobber on this one. That 500ish range will get you peak function for the most part. Single-perc pieces from China reach almost 100% of American function from the right sellers. I have a UFO from Steven (probably not a good seller overall) that's of immaculate American scientific quality and hardiness. On the other hand I also had a mini peyote pillar from DHgate that broke approx 10 mins after I started using it. If you're looking for American options I would say AxisWolf for recyclers, and GordoScientific only if you're enamored with a specific type of percolator he makes. Recyclers tend to be a good value for American glass IMO because few Chinese recyclers function properly.
 

ezd

Member
My experience in rough terms/figures is:

Chinese glass : American quality glass
-- Function of Chinese is typically 75 to 90% of American. If you throw out the reject Chinese pieces which get sent but are really sub sub par /rejects
-- at a cost of from 1/5 to 1/10 of American glass.

I kind of used max of $500 or $600 for American glass as beyond that you mostly get artistic/cosmetic value.

So, like any product that last/top 10 to 20% of function costs a lot.
For me, my glass lust tops out at about Mobius level of $400ish. ;)
I doubt I'd ever buy a $600+ piece

This doesn't surprise me at all and is about what I was thinking would be the case. I'm glad I ordered a few things to try from DH since it sounds like they are hit or miss. I don't think I'll drop more than $600 either, it would have to be something really nice.

Would have to agree with MinnBobber on this one. That 500ish range will get you peak function for the most part. Single-perc pieces from China reach almost 100% of American function from the right sellers. I have a UFO from Steven (probably not a good seller overall) that's of immaculate American scientific quality and hardiness. On the other hand I also had a mini peyote pillar from DHgate that broke approx 10 mins after I started using it. If you're looking for American options I would say AxisWolf for recyclers, and GordoScientific only if you're enamored with a specific type of percolator he makes. Recyclers tend to be a good value for American glass IMO because few Chinese recyclers function properly.

I'm definitely going to check out AxisWolf, thanks. This is the first I'm hearing of him, but some of the more unknown guys have a lot of talent.
 

Justpassedu

Well-Known Member
I been checking out a few glass forums for some heady glass , it's crazy I have seen some real tiny heady type pieces going for over $2,000 depending on the artists. I wanted to grab something interesting bc I got so much China glass but the prices are just way out of my range for most of what I like.
 

pigfoot

Dabs are vapor too!
I been checking out a few glass forums for some heady glass , it's crazy I have seen some real tiny heady type pieces going for over $2,000 depending on the artists. I wanted to grab something interesting bc I got so much China glass but the prices are just way out of my range for most of what I like.

If you're looking for an oil rig, check out our own JoDa. He makes beautiful stuff for very reasonable prices.
 

ezd

Member
JoDa's work is amazing, I reached out to him yesterday but unfortunately he's not doing recyclers just yet. If you want a banger hanger or minitube though, definitely worth checking out.
 

Justpassedu

Well-Known Member
Joda does make some sweet glass. I have a few of his stems. They are all quality. I was looking for a somewhat larger sized piece like a bubbler or recycler.
 
Justpassedu,

YungLeaner

Well-Known Member
I been checking out a few glass forums for some heady glass , it's crazy I have seen some real tiny heady type pieces going for over $2,000 depending on the artists. I wanted to grab something interesting bc I got so much China glass but the prices are just way out of my range for most of what I like.
2000 is way upper end. This isn't really cheap bubbler talk but if you PM me I know many artists from whom you can get a very high quality heady for WELL below that. There's a guy who sells stuff on Reddit that regularly makes full color Rigs for around 100. Instagram is crawling with talented and fairly affordable artists. IMO almost anything around 2k is either overpriced or a piece from one of around 20 artists. @ezd Axis wolf is VERY talented at what he does. He also makes 18mm female rigs which is awesome if you vape and is very rare in non-scientific glass, especially recyclers.

EDIT: @Justpassedu i see you were looking for a bigger piece. Axis wolf is top notch for the price but I really like sovereignty glass as well. The big bubbler style isn't popular in American scientific glass although C2 creations and Sky glass are exceptions. Don't get anywhere near illadelph
 

Gramin

Well-Known Member
Just ordered the FC-MOD. I hope it arrives fairly soon and I don't get a dodgy one. I've ordered 3-4 pieces from DHGate before and haven't had a bad experience yet. This is my first order from Steven however. I will grab the FC-Mouthpiece later on if I decide to get an Evo.
 

Onezero

New Member
Hey guys.

Im new here but Ive been reading these forums for a while researching some stuff but not being a member.

I bought my first vaporizer ever 3 months ago, a mighty. Since then I have not rolled one single joint. I will definetly once a while smoke a joint with my friends though.

I enjoy the mighty very much and I am not smoking that much at all. Usually once or twice a week.

To my question, I was thinking of purchasing a bubbler for my mighty and making a muzzlemod for the connection to the bubbler. Can someone recommend me a good dh bubbler? My price range is between 30-100 $.
I have no clue what to look for so just hit me up with some options :)

Cheers
 

FluffMolotov

Well-Known Member
I've been using the D020 for a good while now and find it to be perfect for most of my needs. I would like to be able to transport my kit around a little better, so am also considering an FC-Mod (looks more compactable) as I enjoy flavorful hits but every now and then a good ramp up in temps to kill a load is required. Only own portable units currently (Arizer Air is my driver) so maybe the FC-Mod is overkill? Then again my grasshopper should be able to milk it up when the hallowed day comes....
 
Top Bottom