PoopMachine
Well-Known Member
I guess the Chinese version...
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
I guess the Chinese version...
flickyourbic
Well-Known Member
Hey ya'll,
Been like a year since I've posted on here. I haven't ordered anything since the Mothership Straight Fab dropped from Steven. Well that broke today, apparently I didn't empty all of the water out of it. I have to leave it outside because of the smell. I smoke outside as well but luckily I keep my dab rig inside and actually dab inside most of the time.
Anyways, I need to order some replacements. I wouldn't mind a new dab rig as well I've been using the FC-710 for almost a year now. Time to switch it up. I've had lots of other pieces in the past I can't remember the names mainly all of the Mobius and Roor knockoffs possible. I told my buddy I'd sell the FC-710 for like 20 bucks without a nail. I got good use and theres a hairline crack in the joint. Works great still I'll just recommend using a nail with an adapter.
Any recommendations? One cheaper piece that will sit outside that is good for flower and won't matter if it gets broken. I don't mind spending more money on the dab rig. I have a newvape 14mm female nail and carb cap but I don't know how much I'm actually digging that setup. Open to new nail suggestion as well. I usually prefer quartz but I like the ti-nail and carb cap because it minimizes smell from excess smoke off the nail.
Been like a year since I've posted on here. I haven't ordered anything since the Mothership Straight Fab dropped from Steven. Well that broke today, apparently I didn't empty all of the water out of it. I have to leave it outside because of the smell. I smoke outside as well but luckily I keep my dab rig inside and actually dab inside most of the time.
Anyways, I need to order some replacements. I wouldn't mind a new dab rig as well I've been using the FC-710 for almost a year now. Time to switch it up. I've had lots of other pieces in the past I can't remember the names mainly all of the Mobius and Roor knockoffs possible. I told my buddy I'd sell the FC-710 for like 20 bucks without a nail. I got good use and theres a hairline crack in the joint. Works great still I'll just recommend using a nail with an adapter.
Any recommendations? One cheaper piece that will sit outside that is good for flower and won't matter if it gets broken. I don't mind spending more money on the dab rig. I have a newvape 14mm female nail and carb cap but I don't know how much I'm actually digging that setup. Open to new nail suggestion as well. I usually prefer quartz but I like the ti-nail and carb cap because it minimizes smell from excess smoke off the nail.
demonscars
Well-Known Member
Just heard from Steven/Jane that the Fc-FTK will mail out next week when I inquired. Which I'm taking with a grain of salt but in the past I've only had positive experiences with them so I'm not too worried.
pigfoot
Dabs are vapor too!
throwawaytre3s
Well-Known Member
I got my d020-D in guys! 15/10. Here's a shot of it with my flowermate v5 pro! I love this thing!
https://vid.me/jlx1
Cool slomo version: https://vid.me/2ZgH
https://vid.me/jlx1
Cool slomo version: https://vid.me/2ZgH
Justpassedu
Well-Known Member
Ordered from Steven weeks ago , tracking #'s we're not working so I contacted them , they kept saying sometimes they do not work , gave it another week with no success . Contacted again and no reply so I contacted dh gate customer service and bamn Steven store replies back after that saying it shipped. Turns out they never shipped it and just gave me any old tracking # , it went out after I had contacted dhgate and I woke up this morning with a early door bell ring , it finally arrived . Only took about 8 days to get to NewYork . Got my möbius matrix copy , it's got the möbius symbol on it , oh we'll , it looks nice , def smaller looking than the pictures online . I can't wait to try it , gotta wait a bit bc I have to take the little cousins to see Star Wars .
nondarb
.
This is standard DHGate/seller nonsense. I've never been ripped off in ~12 or so various purchases from there, but I've been lied too nearly every time.. Fake tracking numbers, lies/miscommunication regarding shipping date and the apparent ability for them to author their own tracking # (my shipment said US despatch> China posting> US shipping and sorting).
If I were you I'd just be stoked it came in less than 2-3 weeks! I've never gotten anything in any less than 2 weeks from China direct. DHgate has tested and expanded upon my patience thoroughly, however in the end its always (thus far) worth it.
Likes2vape
Well-Known Member
My cheapo hydratube recycler from DH gate ended up leaking at the joint from the recycler to the main can. It was fine until I cleaned it with some pbw but after the pbw wash it developed a super small pin hole leak. After noticing the leak I cleaned it out and let it dry out. I figured I would try heating that spot up with the torch to try to seal it back up. The whole weld ended up cracking as soon as it put the torch to it.
I'm bummed as I loved the recycling on it. Has anyone asked SSS, Steven, KATHY or any of the better vendors to make this piece except with thick glass, better welds, etc?
I'm bummed as I loved the recycling on it. Has anyone asked SSS, Steven, KATHY or any of the better vendors to make this piece except with thick glass, better welds, etc?
@Likes2vape i am drawing up a new one that's pretty much the same design but everything a little tighter, with an angled mouthpiece to keep the overall height at 9" or so. I'll post a drawing and photoshop of the idea later tonight.
Cannabis Connoisseur
I LOVE LIFE
Be sure to specify that the perc should be above the return tube. My current version shoots water up the return on the initial pull
Justpassedu
Well-Known Member
I have only purchased about 6 pieces in my lifetime from dhgate , last one from Steven was a ht that worked but not perfectly , they were cool and said do a dispute and we will refund you so I got a free piece out of it and thought I'd give them some business back so I ordered the möbius copy from them. Made out well , it arrived quick but not in the original time frMe that it was supposed to. I'm happy though.
Dangus
Yeah, well, that's just, like, your opinion, man.
For anyone interested, I posted in this thread about the redesigned nectar collector/hydrotube.
@eLiguL i have both the UFO v1 and FC-mod and vote ufo, though I use mine with an E-nano.
@eLiguL i have both the UFO v1 and FC-mod and vote ufo, though I use mine with an E-nano.
eLiguL
Well-Known Member
Thank you for your input. Since I would only have access to the FC-UFO V2, would you still recommend it?
Anyone else in the community want to chime in?
That Nectar Collector looks interesting, do you have a link for it on DHGate?
V2 looks better to me, so yes.
My post in the other thread has a link to the original nectar collector.
Edit: here ya go http://m.dhgate.com/product/nectar-...bbler-glass/255410695.html#s1-30-1|4069142022
My post in the other thread has a link to the original nectar collector.
Edit: here ya go http://m.dhgate.com/product/nectar-...bbler-glass/255410695.html#s1-30-1|4069142022
nondarb
.
I'm excited to see V2, the possibility of HT mp's was a big reason I choose this unit: www.dhgate.com/product/product/2015-new-two-function-mobius-matrix-perc/259562203.html/259562203.html that and the ability to use a j hook over the UFO.
Thunderclees
Well-Known Member
I was always satisfied with my cheaper pieces from jhanpixel: http://www.ioffer.com/selling/jhanpixel
he might not be as cheap as those crazy motherships, but they probably won't break as easily...
he might not be as cheap as those crazy motherships, but they probably won't break as easily...
Likes2vape
Well-Known Member
Actually if you order from the reliable vendors from dhg I think most people are extremely happy with their purchases. I know I have been.
Mangos
Well-Known Member
About to order that nectar collector for my evo- just wanted to make sure that it won't leak . Basically I would just like to be reassured- that even at this cheap price, this looks like a very nice well functioning piece of glass that could be used with my evo.
Speaking of.....I've been eyeing this one...
throwawaytre3s
Well-Known Member
I can totally dig that sentiment. I have been 100% satisfied with my D020-D from sunshine, as well as a hammer style bubbler I've ordered from them, as well as a steamroller. I haven't had anything break yet, but then again, I'm a fairly careful guy.
Mangos
Well-Known Member
Thanks for your reply. Think I will order it, just wanted to make sure it would function for the Evo-will have to be extra careful if the glass is thin in some places though.