Cheap High Quality Bubbler

subway13029

Well-Known Member
I think that the basic one that is recommended is the d020..its most common and "entry level" to start with..do your old bongs have a slide out bowl? And is there a black o ring around it or is it like frosted glass where the bowl goes in?
 
subway13029,
  • Like
Reactions: mikeben

mikeben

Well-Known Member
The two I have now (I broke a few in my day like anyone) have slide out bowls with frosted glass. THere is no o ring and no other holes. God they look filthy, I just never knew how to care for them well. Except for one or two occasions I have not used them in years. I will look up this d020.
 
mikeben,

subway13029

Well-Known Member
If they are ground glass which is what the frosted is called..they are either 14 or 18..those are standard size..they also make 10 now for dab rigs and such..
 
subway13029,
  • Like
Reactions: mikeben

mikeben

Well-Known Member
Well the both fit each other. I'm thinking 14 mm because they aren't wide.
Maybe grass city has something good?
 
mikeben,

DieHard

Accessory supplier
Accessory Maker
The two I have now (I broke a few in my day like anyone) have slide out bowls with frosted glass. THere is no o ring and no other holes. God they look filthy, I just never knew how to care for them well. Except for one or two occasions I have not used them in years. I will look up this d020.
Take a measurement of the hole what's the bowl slides into. This will give a rough idea. Also you can clean those old soldiers by plugging up all holes and putting a few oz of Isopropyl Alcohol and carefully shaking. It can soak for a time. If the grunge is very stubborn, add some very coarse salt to the ISO. It will not dissolve in alcohol and wall act as a mild abrasive when you shake it. Last but not least you can soak in a solution of PBW (Powdered Brewery Wash). It is available online cheap, or at home brew stores. It will bring your glass back to nearly new.
 
DieHard,
  • Like
Reactions: mikeben

subway13029

Well-Known Member
Yeah you should be fine with the haze..i have a few straight type tubes and certain vapes cant be used cleqrance wise. But haze it versatile little beast..
 
subway13029,
  • Like
Reactions: mikeben

mikeben

Well-Known Member
Last edited:
mikeben,

DieHard

Accessory supplier
Accessory Maker
This is such an individual decision. This one looks like it has a bowl attached to the stem. When you remove the bowl to attach your Haze there will no longer be a stem down in the water. Also IMO ice pinches are not so helpful when "vapor bonging". Ice will cause the vapor to condense on the glass and in the water, thus robbing you of actives albeit with a smoother hit. Warm water will provide moist vapor. A piece with more percolation (bubbles) will typically hit smoother but at the expense of flavor. Something like this one might pair nicely with the Haze. But it is on the small side.
http://www.grasscity.com/us_en/blac...ng-with-showerhead-diffusor.html#.ViOuTtT3arU
 

subway13029

Well-Known Member
Why dont you go with the magic flight orbiter..i love that little thing and ogb can mak3 you a mp so you dont have to yse the whip but this little puply is a flavor saver..
 
subway13029,
  • Like
Reactions: DieHard

NimbusVapor

Well-Known Member
Update on my FTK from kivisdream.... After 2 weeks of the tracking info not updating and contacting him numerous times, he now says something happened with his shipment of ftks...

"something wrong occured to my products,I am repack your order now.please wait some time.
sorry for that"

Has anyone else here ordered an ftk from kivisdream?
 
NimbusVapor,

weenstoned

Well-Known Member
I didn't order one, but it is no longer listed on their store. Might be having problems manufacturing them.
 
weenstoned,

jl420

Well-Known Member
o_glass-pipes-bongs-bubbler-glass-glass-oil-rig-j15-14-4m-bbf5.jpg

I was comtemplating buying this 14mm male joint rig. ($43 bucks all said and done) It's just over 8.5 inches high and I wanted my fellow FC community Dabbers to let me know if they could see any shortfalls. I've read a few online reviews and they basically say it's a decent set up for the price. Any feedback is always appreciated...
 
jl420,

FavorVapor

New Member
Any links to a small beaker rig?

Not pendant size. More similar to a bubbler

Preferably worked but not required

:peace:
 
FavorVapor,

mikeben

Well-Known Member
This is such an individual decision. This one looks like it has a bowl attached to the stem. When you remove the bowl to attach your Haze there will no longer be a stem down in the water. Also IMO ice pinches are not so helpful when "vapor bonging". Ice will cause the vapor to condense on the glass and in the water, thus robbing you of actives albeit with a smoother hit. Warm water will provide moist vapor. A piece with more percolation (bubbles) will typically hit smoother but at the expense of flavor. Something like this one might pair nicely with the Haze. But it is on the small side.
http://www.grasscity.com/us_en/blac...ng-with-showerhead-diffusor.html#.ViOuTtT3arU
I think I need a 14 or 18 mm for the wong, but I will change my order again to this http://www.grasscity.com/us_en/grac...e-showerhead-diffuser-white.html#.ViSh5ZVdFjo.
Please tell me this will work?
 
Last edited:
mikeben,

Stevenski

Enter the Dragon
Well the both fit each other. I'm thinking 14 mm because they aren't wide.
Maybe grass city has something good?

If you want to order from Grass city rather than DHgate I don't blame you as their prices seem pretty good for the sale items & way less hassle if you have issues. I would suggest a vape bubbler or a simple straight tube or beaker under 10" without getting too fancy.

I use a Blaze one that is similar for daily use & at $55 is a bargain.

http://www.grasscity.com/us_en/circ...-worked-color-sections-blue.html#.ViSsvn4rLIU

Another one that looks good for the money is

http://www.grasscity.com/us_en/scientific-glass-bubbler-with-cage-perc.html#.ViSsK34rLIU
 

tepictoton

Well-Known Member
Or try head and nature(I believe they are located in Germany)... My experience with grasscity has been really bad(try reaching their customer service for instance, takes them more then a week to ship pieces and so on) , and their prices are of the hook. Check out head and nature and you can find the same pieces for half the price sometimes. Just my two cents
 
tepictoton,
  • Like
Reactions: SteamfunQ

SteamfunQ

Well-Known Member
I can second what tepictoton has said and would personally choose head nature over grasscity anytime having ordered from both of them multiple times.
 
SteamfunQ,

dabsonthemountain

Well-Known Member
I've been a member of GC forums since '11 and have yet to hear a single good thing about the shop. You get banned if you downtalk it, and some of the things people get banned for are just mentioning the terrible customer service, or terrible shipping practices. The prices are outrageous for what is essentially china glass too, and i've heard of plenty of payment issues. And just try to contact customer service after buying something, you never hear from them at all.

I would actually rather stick to dhgate.
Grasscity is great, full of knowledgeable people, but avoid the shop at all costs.
 

DieHard

Accessory supplier
Accessory Maker
FWIW I have not ordered from Grasscity. I have had several orders from DHGate with only minor problems that were handled quickly.
 
DieHard,
Top Bottom