Cheap High Quality Bubbler

[Hashsnob]

I received this reply,

"I see that it is not good quality due to the base.

after confirmed with Steven,So there have 2 ways to settle your problem:

1.you keep it and give you 30% disocunts.

2.pls make broken this piece and send me broken pic for Steven confirmation,then we will send u a replacment.

Jane"

Are they asking me to break it? lol.. I dunno how I feel about that, that's gotta be like 10 years bad luck or something.

 

[hafalump]

Break some corona bottles, send the pic. Remove labels first.

 

[A1FBG]

I received this reply,

"I see that it is not good quality due to the base.

after confirmed with Steven,So there have 2 ways to settle your problem:

1.you keep it and give you 30% disocunts.

2.pls make broken this piece and send me broken pic for Steven confirmation,then we will send u a replacment.

Jane"

Are they asking me to break it? lol.. I dunno how I feel about that, that's gotta be like 10 years bad luck or something.

Id take a hammer and smack its titties off !!! Have fun with it since you got the opportunity for free. Somewhat make up for your inconvenience haha

 

[Stu]

Are they asking me to break it? lol.. I dunno how I feel about that, that's gotta be like 10 years bad luck or something.

You should make a video of the destruction. Slo mo preferred. Get creative and have fun! Hammers work, but I read on the internet that explosives are the safest way to destroy glass on camera, so it's probably true. Your call of course.

 

[Hashsnob]

Break some corona bottles, send the pic. Remove labels first.

Right.. I bet there is a broken straight fab pic somewhere on here....

You should make a video of the destruction. Slo mo preferred. Get creative and have fun! Hammers work, but I read on the internet that explosives are the safest way to destroy glass on camera, so it's probably true. Your call of course.

I dunno... what if its a setup? "HAHA you broke your glass, no replacement for you! Thats what you get for complaining, China #1"

 

[Cjisohsocool]

Other companies do it too. I had to cut the cord to my broken coffee machine and email it to them for them to replace it

 

[NickDlow]

Right.. I bet there is a broken straight fab pic somewhere on here....

I dunno... what if its a setup? "HAHA you broke your glass, no replacement for you! Thats what you get for complaining, China #1"

It's been done many many many times before you so don't worry. I personally did it also. I think that has something to do with the shipping company. Maybe they refund them for broken packages. This is just my thought. Either way do it and you'll get a new piece.

 

[justcametomind]

They just want to be sure you will not be enjoying 2 pieces at the price of one.

 

[FlyingLow]

Looking for suggestions.

Something like the D022 but without the second chamber.
I like the main perc and removable downstem, I like the size and shape of the can.
If possible, I would prefer a removable mouthpiece as well... less obvious when traveling.

 

[ragnorokk]

@Hashsnob You could always just say in your next email that it fell over on its own and smashed, just like you thought it would. Even if they instruct you to smash it, I don't see you gaining anything from blatantly stating that you smashed it... Especially in dhgate's built in email service.

 

[cumulus]

Are they asking me to break it? lol.. I dunno how I feel about that, that's gotta be like 10 years bad luck or something.

Have someone Photoshop the "breakage."

 

[anasrzi]

Keep checking dh gate every no wand then to see what been released recently check out this beast , found so many pieces it's so difficult to decide what to buy but this one just takes the cake size wise

http://www.dhgate.com/product/2015-...ne/253857293.html#myaccount_favorites-11-null

 

[brucee10]

Keep checking dh gate every no wand then to see what been released recently check out this beast , found so many pieces it's so difficult to decide what to buy but this one just takes the cake size wise

http://www.dhgate.com/product/2015-...ne/253857293.html#myaccount_favorites-11-null

I like that they're using big joints. I'd really like something for my sublimator Base Launcher but they want 400 CAD for a simple single perc unit directly from Sublimator.

 

[gaseous_clay]

Keep checking dh gate every no wand then to see what been released recently check out this beast , found so many pieces it's so difficult to decide what to buy but this one just takes the cake size wise

http://www.dhgate.com/product/2015-...ne/253857293.html#myaccount_favorites-11-null

I have a Vapexhale Cloud EVO. What would change everything for me would be a modular piece that would be a Hydratube base that could attach to these.

 

[Cannabis Connoisseur]

Keep checking dh gate every no wand then to see what been released recently check out this beast , found so many pieces it's so difficult to decide what to buy but this one just takes the cake size wise

http://www.dhgate.com/product/2015-...ne/253857293.html#myaccount_favorites-11-null

Look at those joint sizes, there's no way possible those two joints are the same size.

 

[herbalist33]

Well my fc-710 arrived from Steven in perfect condition, and only took 8 days from shipping to arrival at my door in the UK yest- awesome service !

Bad news: the 14mm female to female adaptor I ordered from another dhgate seller has not arrived yet, even though it shipped 4days before the fc-710. This is torture!!!

I've got a lotus, mflb, and enano all waiting to go thru this glass, and no way to pair them. Any suggestions guys? I was thinking of using my orbiter as a kind of adapter, but think the drag would be too much, and too much risk of breaking one or both of them...

I have however managed to hit the fc-710 a couple times with my Vaponic (which conveniently pairs to the 14mm male joint on top of the fc-710, and it seems to hit really well, I just can't wait to put a full enano load through this piece.... Aargh my postman better have a special package for me 2mo!!

Thanks again for helping me choose this piece- it's beautiful!! And smaller than I was expecting, which is a bonus!!

Oh yea, and as for the glass nail it shipped with, I've never done dabs properly, but have a small bit of homemade qwiso... All I need to do is heat the glass nail with a torch till it's really really hot, drop the nail in the joint, put the cover over the nail, then drop the dab on the nail while inhaling, right? Are these glass nails any good or not worth the hassle?

 

[Hashsnob]

Well good news, good thing I didn't jump the gun and get to smashing. I had a message from Steven today saying not to break the straight fab, to keep it, and that a replacement would be on its way. Looking like stellar customer service so far.

 

[justcametomind]

Well my fc-710 arrived from Steven in perfect condition, and only took 8 days from shipping to arrival at my door in the UK yest- awesome service !

Bad news: the 14mm female to female adaptor I ordered from another dhgate seller has not arrived yet, even though it shipped 4days before the fc-710. This is torture!!!

I've got a lotus, mflb, and enano all waiting to go thru this glass, and no way to pair them. Any suggestions guys? I was thinking of using my orbiter as a kind of adapter, but think the drag would be too much, and too much risk of breaking one or both of them...

I have however managed to hit the fc-710 a couple times with my Vaponic (which conveniently pairs to the 14mm male joint on top of the fc-710, and it seems to hit really well, I just can't wait to put a full enano load through this piece.... Aargh my postman better have a special package for me 2mo!!

Thanks again for helping me choose this piece- it's beautiful!! And smaller than I was expecting, which is a bonus!!

Oh yea, and as for the glass nail it shipped with, I've never done dabs properly, but have a small bit of homemade qwiso... All I need to do is heat the glass nail with a torch till it's really really hot, drop the nail in the joint, put the cover over the nail, then drop the dab on the nail while inhaling, right? Are these glass nails any good or not worth the hassle?

Someone earlier said they are fine, only thing is they break easily.
I never used mine still.
I think you are right saying to heat them separately from the water pipe, it's not titanium and so the heat could go to the glass piece more easily than using a Ti nail.

 

[DieHard]

Well my fc-710 arrived from Steven in perfect condition, and only took 8 days from shipping to arrival at my door in the UK yest- awesome service !

Bad news: the 14mm female to female adaptor I ordered from another dhgate seller has not arrived yet, even though it shipped 4days before the fc-710. This is torture!!!

I've got a lotus, mflb, and enano all waiting to go thru this glass, and no way to pair them. Any suggestions guys? I was thinking of using my orbiter as a kind of adapter, but think the drag would be too much, and too much risk of breaking one or both of them...

I have however managed to hit the fc-710 a couple times with my Vaponic (which conveniently pairs to the 14mm male joint on top of the fc-710, and it seems to hit really well, I just can't wait to put a full enano load through this piece.... Aargh my postman better have a special package for me 2mo!!

Thanks again for helping me choose this piece- it's beautiful!! And smaller than I was expecting, which is a bonus!!

Oh yea, and as for the glass nail it shipped with, I've never done dabs properly, but have a small bit of homemade qwiso... All I need to do is heat the glass nail with a torch till it's really really hot, drop the nail in the joint, put the cover over the nail, then drop the dab on the nail while inhaling, right? Are these glass nails any good or not worth the hassle?

If you heat the nail separately, you run the risk of either 1) Dropping a HOT nail 2) Burning the crap out of yourself 3) starting a fire 4) the nail cooling too much and wasting your dab.
Don't be afraid. That glass was born in fire hotter than a typical dabbing torch is capable of. Heat the top of the nail ON the rig. Put a dab of reclaim on there to season it first. Or sacrifice a small dab to the gods for seasoning.

 

[ragnorokk]

Well my fc-710 arrived from Steven in perfect condition, and only took 8 days from shipping to arrival at my door in the UK yest- awesome service !

Bad news: the 14mm female to female adaptor I ordered from another dhgate seller has not arrived yet, even though it shipped 4days before the fc-710. This is torture!!!

I've got a lotus, mflb, and enano all waiting to go thru this glass, and no way to pair them. Any suggestions guys? I was thinking of using my orbiter as a kind of adapter, but think the drag would be too much, and too much risk of breaking one or both of them...

I have however managed to hit the fc-710 a couple times with my Vaponic (which conveniently pairs to the 14mm male joint on top of the fc-710, and it seems to hit really well, I just can't wait to put a full enano load through this piece.... Aargh my postman better have a special package for me 2mo!!

Thanks again for helping me choose this piece- it's beautiful!! And smaller than I was expecting, which is a bonus!!

Oh yea, and as for the glass nail it shipped with, I've never done dabs properly, but have a small bit of homemade qwiso... All I need to do is heat the glass nail with a torch till it's really really hot, drop the nail in the joint, put the cover over the nail, then drop the dab on the nail while inhaling, right? Are these glass nails any good or not worth the hassle?

I use that little included nail somewhat regularly, and it has yet to crack, unlike my other (much more substantial looking) glass nails that were included with other Chinese glass. Place it in the joint before you heat it, so you don't burn yourself it only fits little tiny dabs, but works fine.

 

[herbalist33]

Cool well I've tried it a couple times, but Havnt got very good results so far... Perhaps it's my qwiso, but I reckon the nails not hot enough. Generally how long would you heat up the glass nail with a butane torch before hitting a dab?

And also, to those who own the fc-710, where am I supposed to fill to? I first filled so it just covered the top of the downpipe, then saw a video of a guy who filled it a little below the down stem, so that the end was out of the water, so I tried that too. And I've also tried filling it so there's not much room left in the main chamber... All methods worked well, but was wondering if anyone had any preference/tips/suggestions. At the moment I'm hitting it with the lotus+wpa balanced on top of the male joint: works pretty good, although I don't think the airflow is optimum, as I just combusted accidentally for the first time in weeks using the lotus:.. Yuck!

 

[MGG]

http://www.dhgate.com/product/2015-...ne/253857293.html#myaccount_favorites-11-null

Wtf this is awesome, with the right adapter and a keckclip you've got yourself a cheapo hydratube!
Now if only he did different perc styles and it was just a 18mm male connector on the base and a female 18mm on the tube. Someone please make this a thing, this reignited my hope for a dhgate hydratube.

Also still waiting on a sovereignty stemline/stem8/stem6 bent neck knock off :'[

 

[FlyingLow]

Cool well I've tried it a couple times, but Havnt got very good results so far... Perhaps it's my qwiso, but I reckon the nails not hot enough. Generally how long would you heat up the glass nail with a butane torch before hitting a dab?

And also, to those who own the fc-710, where am I supposed to fill to? I first filled so it just covered the top of the downpipe, then saw a video of a guy who filled it a little below the down stem, so that the end was out of the water, so I tried that too. And I've also tried filling it so there's not much room left in the main chamber... All methods worked well, but was wondering if anyone had any preference/tips/suggestions. At the moment I'm hitting it with the lotus+wpa balanced on top of the male joint: works pretty good, although I don't think the airflow is optimum, as I just combusted accidentally for the first time in weeks using the lotus:.. Yuck!

Check out some of the concentrate threads, like Concentrates for Noobs. It has a wealth of basic info towards the beginning, and has grown to include some quite advanced topics.

FWIW, I heat my quartz till it is red hot, then wait a few seconds after it quits glowing before dropping concentrate.

 

[Cannabis Connoisseur]

http://www.dhgate.com/product/2015-...ne/253857293.html#myaccount_favorites-11-null

Wtf this is awesome, with the right adapter and a keckclip you've got yourself a cheapo hydratube!
Now if only he did different perc styles and it was just a 18mm male connector on the base and a female 18mm on the tube. Someone please make this a thing, this reignited my hope for a dhgate hydratube.

Also still waiting on a sovereignty stemline/stem8/stem6 bent neck knock off :'[

I talked about this yesterday. That big joint on the Tube looks like a 22 that's a NO!!

 

[justcametomind]

I can imagine it's a huge thick piece and having to match it with an adapter all the times could be a pain but can you elaborate on it?
Edit:
Read your post history. Do you think he's selling a bong made of 2 pieces who don't match each other?