Cheap High Quality Bubbler

[EmDeemo]

Congrats emmdeemo
What piece did you buy?
I broke my dhgate cherry yesterday by ordering from sunshinestore too
I ordered a D020-D and they agreed to swap the bowl etc. for some 18-14mm adapters.
Woke up to a shipped notification today

Pretty much the same actually, the d020, some 18/14 adapters, think I got a PNWT too, can't remember now! :-) It was very late and I was maybe a bit too relaxed :-)

 

[Trogdor]

@emmdeemo sadly i haven't got a PNWT with me to compare, but from what I can see the mini nectar collector is smaller all around, with less diffusion and less splash resistance. However, it is nice because you can put it up to your lips vertically and still get a seal (bubbles best when it's straight, although a slight angle is fine), the PNWT looks like you may need to tilt your entire head to use it vertically

 

[tstar]

Nice! I was thinking about picking up the 710 whip for the dabbucino since it's so cheap. What did u like/not like about the whip? What enail did u end up getting after selling the whip?

The 710 whip would be awesome for the dabuccino. My reason I say that is because the flat heating element of the nail bends 90° so the cord will run along the side of the rig (Damon also provided a cord to secure the power cable to the rig). Benefit of this is that the dabuccino isn't a huge piece so the less top heavy the better. With my standard 20mm e nail I notice the metal bar that runs off the coil tends to want to make the dabuccino fall over to that side it's pointed towards. So when I use it I have the power cable running by the straw kinda annoying but it will do (side note he dabuccino is my travel rig so I won't be using the e nail on it often).

Pros - it is ceramic (a lot more flavor than ti nails). The carb cap makes it literally so easy just dip the tool through the hole and it's already doing the convection for you. It takes less real estate space on your table or desk. The nail it comes with fits male and female 10, 14, & 18 mm joints.

Cons - you're limited to to the low temp life as the nail maxes at around 680-700 degrees (from reading around, not sure of exact temp). It's analog so when you turn it on its on or off there is no temperature setting. D nail has an analog nail but it tells you the temp (level 7 = 700°), I wish it did that and I would of kept it. It also takes a while to get to running temp. Not sure why but I used to wait about 6-7 mins before it was the "right" temp for me

I ended up getting the High 5 vape e nail. They have a sale now it's $119 for an e nail with PID controller. I switched because I wanted to be able to adjust my temperature to find my sweet spot. I like that once you find the temp (mine is 730°) you flip the nail on and in 2 mins it's at temp. Plus they are based in the states had my nail in 3 days, you don't find many low cost digital e nails at the price not coming from China (I know crazy right? US selling a product as cheap as China!) and it comes with awesome skins! I got the Benjamin Danklin

http://www.highfivevape.com/products/high5-benjamin-danklin-enail

Hope I'm allowed to link this here? I'm of no affiliation to this company what so ever

 

[EmDeemo]

@emmdeemo sadly i haven't got a PNWT with me to compare, but from what I can see the mini nectar collector is smaller all around, with less diffusion and less splash resistance. However, it is nice because you can put it up to your lips vertically and still get a seal (bubbles best when it's straight, although a slight angle is fine), the PNWT looks like you may need to tilt your entire head to use it vertically

Thanks for the info. I broke my pwnt a while back but just bought one from sunshinestore. If it's annoying to use with Lily in any way, I'll try that nectar collector bubbler.

Thanks for the link and reply!

 

[cybrguy]

Hey,
I just pre-ordered a grasshopper and now I'm looking for a nice portable water tool.

Well, the good news is you will have plenty of time to get your glass...

 

[ragnorokk]

Wow, I ordered the following all on 7/24; banger/dab tool from hyman, dropdown from alina, and FC-710 from Steven... And I've received the hyman package Friday, tracking shows I should be receiving the dropdown in the next business day or two, and lastly the Steven provided tracking number doesn't even have a single update, it actually still says China.

Anyone have similar dealings?

Just wanted to state that when it still says China several days later, that means it's on a ship, heading toward US customs I got my FC-710 in a total of 7 days.

I also had asked (Jane? Whoever answers mail for Steven) to wrap extra securely and told her someone had given me a bad review of their packing quality. I received my FC-710 swaddled in shitloads of bubble wrap, with a little packing paper to fill up any weird gaps inside the box. Nothing was moving in there, except the marble.
The piece is stellar. Good suggestion, guys. I can't believe how tiny it is, I had no idea. I hope he makes a slightly larger 18mm version! The glass is really well made, though it's not as thick as some DHgate glass I've bought. Minor aesthetic issues, but everything is functionally perfect. 5/5 stars, didn't expect it would be this Bomb.

Congrats emmdeemo
What piece did you buy?
I broke my dhgate cherry yesterday by ordering from sunshinestore too
I ordered a D020-D and they agreed to swap the bowl etc. for some 18-14mm adapters.
Woke up to a shipped notification today

I am impressed; SSS blew me off when I asked for different parts. Their glass is super thick the build quality on mine was off, but everyone says good things about SSS -- keep your fingers crossed, I guess?

Also... Man I am excited to hear about those jm flow pieces from Kathy!!!! Dunno how to feel about them, never having used one, but I like more styles hitting the DHgate market!

 

[Cjisohsocool]

Anyone know a good simple beaker/straight tube on dh?

 

[slatihe]

Anyone know a good simple beaker/straight tube on dh?

All kinds for the straight part... They just tend to be a bit short so if you want 24" plus you may have hard time....

This was first thing I saw on bottom of nector collector page.
http://m.dhgate.com/product/new-glass-bong-glass-smoking-pipe-with-3/191777030.html

18" tall roor knock off with 3 honeycomb diffusion plates. Didn't look at whom seller was, but had good reviews. Look around, super common.


Never looked for tubes really, but the strait ones are EVERYWHERE... Haven't seen beaker but haven't looked so YMMV. best of luck

 

[Calliope]

Hi Everyone,
I am about to make my first purchase. I was thinking of either getting a FAB egg from CCG or CNMENG or the straight FAB from Steven. I will be using this piece exclusively for concentrates. Any thoughts on which one I should get? Thanks for your input!

*I searched "FAB", "FAB egg", "FAB CCG", etc. and it yielded no results because the word combination was insufficient.

 

[NorCalBrah]

Good looks on the review and link tstar, I appreciate it. I went ahead and copped the high5 enail and ordered a few quartz bangers to hook em up to. Can't wait.

 

[A1FBG]

I ordered that High5 enail too. They got it goin!

Can anyone help me decide between Steven's Torus and Binary Matrix?

 

[bobgnarly]

This might be assumed but I just wanted to double check. All the china pieces we're getting are all soda-lime glass and not real boro silicate right? Has any seller ever confirmed to be working with real boro? I have quite a large collection of china pieces, but I also have some hitmans, the glass on the hitmans feel and look slightly different I thought.

Then I found this: http://www.udel.edu/chem/GlassShop/PhysicalProperties.htm

It looks like soda-lime is easier to crack from heat (due to the higher CoE), which I've seen tend to happen with china rigs until I started using a drop down on all of them.

What are your thoughts?

There are other sellers on dhgate that claim their glass is borosilicate. But the sellers that most of the people in this thread ( including myself) use do not say that. Is this because the other sellers are full of crap? And is there any way to test glass to see if it's boro?

 

[alittledabwilldoya']

Hi Everyone,
I am about to make my first purchase. I was thinking of either getting a FAB egg from CCG or CNMENG or the straight FAB from Steven. I will be using this piece exclusively for concentrates. Any thoughts on which one I should get? Thanks for your input!

*I searched "FAB", "FAB egg", "FAB CCG", etc. and it yielded no results because the word combination was insufficient.

badda-boom: http://www.dhgate.com/product/2015-...s/233845598.html#myaccount_orderdetail-1-null

+ it's 10% off for the next 5 days!

 

[tstar]

Good looks on the review and link tstar, I appreciate it. I went ahead and copped the high5 enail and ordered a few quartz bangers to hook em up to. Can't wait.

Yes! You won't be let down. Trust me you'll be way happier you went this route. If you have Instagram follow them. They should be posting my slow mo video of the straight fab soon. They posted my a milky video on my toro a week or so go.

I ordered that High5 enail too. They got it goin!

Can anyone help me decide between Steven's Torus and Binary Matrix?

haha awesome! Glad you jumped on that deal too

your orders will ship out quick. If it didn't ship already. I ordered mine on a Saturday morning in and by Saturday afternoon it was shipped out, no lie.

For the glass I'd probably lean more toward the matrix. Steven's recent torus video showed it with a slight vortex. I personally am waiting for a good vortex ingo torus video before I pull the trigger

 

[twentypast4]

Just wanted to thank you guys for recommending the FC-710. I picked up some Cannatonic shatter (high CBD, real sappy) to break in this bad boy, and I'm feeling great. No back pain, head feeling light, eyes feeling heavy. The FC-710, is to say the least a smooth sailer, no cough - ever unless you over shoot the temp.

After I buy a few other rigs I'm interested in, I plan to buy another FC-710 just to have one on standby.

Cheers FC

 

[A1FBG]

Yes! You won't be let down. Trust me you'll be way happier you went this route. If you have Instagram follow them. They should be posting my slow mo video of the straight fab soon. They posted my a milky video on my toro a week or so go.

haha awesome! Glad you jumped on that deal too

your orders will ship out quick. If it didn't ship already. I ordered mine on a Saturday morning in and by Saturday afternoon it was shipped out, no lie.

For the glass I'd probably lean more toward the matrix. Steven's recent torus video showed it with a slight vortex. I personally am waiting for a good vortex ingo torus video before I pull the trigger

Aye that shipping is impressive!

Speaking on the Torus. I noticed the drain down speed was a little slow, is that the vortex ?

 

[tstar]

Aye that shipping is impressive!

Speaking on the Torus. I noticed the drain down speed was a little slow, is that the vortex ?

Yeah. My main concern is that previous videos show no vortex at all and the most recent shows a little. I'd like to know that every piece is being produced to vortex and well before I commit as I personal think that is a big part of any incycler

 

[alittledabwilldoya']

purchased the MS mini clone on 7/30.
arrived in SFC sorting center 8/4.

That's pretty damn fast.
(hopefully it makes it to me in CO soon).

http://www.dhgate.com/store/product/advance-booking-2015-new-high-quality-glass/218128237.html

 

[wingbatwithsomeforme]

I'm looking for a straight tube with no diffusion and without an attached downstem (I have a diffusing downstem already that I'd like to use) - really just want a plain tube with 18mm joint and ice catcher, I'm flexible on height. I am having a tough time finding something like this on dhgate. So I wanted to see if anyone has seen something like this on dhgate or somewhere else that won't be super expensive.

 

[Dangus]

I'm looking for a straight tube with no diffusion and without an attached downstem (I have a diffusing downstem already that I'd like to use) - really just want a plain tube with 18mm joint and ice catcher, I'm flexible on height. I am having a tough time finding something like this on dhgate. So I wanted to see if anyone has seen something like this on dhgate or somewhere else that won't be super expensive.

Ok, so I gave it a search...these might fit the bill...

price varies by size on this one...

http://www.dhgate.com/product/beauty-cute-ketty-cat-glass-bong-water-pipes/246296978.html

$79.55

http://www.dhgate.com/product/big-thick-glass-bong-17-039-039-straight/248171952.html


$58.50

http://www.dhgate.com/product/40cm-bubbler-glass-hookahs-2015-new-water/249836613.html


$43.00

http://www.dhgate.com/product/4-arm-tree-percolator-glass-water-bongs-18/246815963.html

Then I found some beakers too:

$27.28

http://www.dhgate.com/product/newest-design-clear-glass-water-bong-with/236177168.html

$27.30

http://www.dhgate.com/product/manufacturer-two-function-glass-smoking-bong/199630822.html


Hope this helps

Cheers

 

[tstar]

^ He's looking for minimal diffusion though

I'm looking for a straight tube with no diffusion and without an attached downstem (I have a diffusing downstem already that I'd like to use) - really just want a plain tube with 18mm joint and ice catcher, I'm flexible on height. I am having a tough time finding something like this on dhgate. So I wanted to see if anyone has seen something like this on dhgate or somewhere else that won't be super expensive.

Hey man I found some straight tubes for on DHgate. I'm on my phone right now and was using the app to find tubes so I can't paste a link.

I searched their term "roor bong" as a start because there's a bunch of clones and roor makes a lot straight tubes. Found one on Hfy_glass it's called 9mm roor something it's $54.55. 18 mm joint, ice catch and 30 cm tall.

If you wait like 20 mins when I get home I'll link it

Hope that helps you

 

[Dangus]

^ He's looking for minimal diffusion though

Only 2 of the 6 I posted had the trees...just trying to help

Here's the tube you mentioned:

http://www.dhgate.com/store/product/9mm-glass-bong-without-perc-without-roor/240691932.html

Looks like it truly fits the bill, and no hello kitty logo either!

 

[tstar]

Only 2 of the 6 I posted had the trees...just trying to help

Here's the tube you mentioned:

http://www.dhgate.com/store/product/9mm-glass-bong-without-perc-without-roor/240691932.html

Looks like it truly fits the bill, and no hello kitty logo either!

Yup that's exactly it! Great team work haha

my bad homie I wasn't trying to be rude but I see how it could be read that way. Sorry man haha

 

[wingbatwithsomeforme]

Only 2 of the 6 I posted had the trees...just trying to help

Here's the tube you mentioned:

http://www.dhgate.com/store/product/9mm-glass-bong-without-perc-without-roor/240691932.html

Looks like it truly fits the bill, and no hello kitty logo either!

Thanks, Dangus and Tstar! This is exactly the one! Last thing is to check if by chance the headshop next to my house has the same thing for < $60. Since it's such a plain tube I feel like it might. Will keep updated.

Thanks again! Excited to use this setup with my LSV!

 

[toolbox12]

Thanks, Dangus and Tstar! This is exactly the one! Last thing is to check if by chance the headshop next to my house has the same thing for < $60. Since it's such a plain tube I feel like it might. Will keep updated.

Thanks again! Excited to use this setup with my LSV!

Check out Marijuana packaging, they have a few options that may work. Placed an order earlier this week so can't comment on anything about them, yet.

edit: mailman just dropped off package...