Cheap High Quality Bubbler

[wilvape]

Black leaf is nice but it's chinese, i like something american with those pin holes like mobius ion bubbler matrix perc so cool the 160 pin holes

planet vape has black leaf listed as being blown by toro glass an american manufacture, I ordered the smoke shower micro bubbler to be delivered tomorrow.

 

[goatgobaahh]

1. Tilt glass almost sideways, and insert steel cubes gently.
2. Make sure contact is made with the ice pinches and cubes before turning upright to avoid cracking.
3. Fill with water

Hmm neat idea! Any bubblers with ice pinches or specific brands that would hold some?

My perfect bubbler would be...
Kick back style
About 9 inches high
Flat bottom with a beaker bottom chamber or round bottom chamber (for sheer volume of hits)
Bubbles...lots of bubbles.

 

[Deadshort480]

Sam at Glass Blowers Direct will modify any of his designs to accommodate ice pinches.

 

[SlinginPaint]

Hmm neat idea! Any bubblers with ice pinches or specific brands that would hold some?

My perfect bubbler would be...
Kick back style
About 9 inches high
Flat bottom with a beaker bottom chamber or round bottom chamber (for sheer volume of hits)
Bubbles...lots of bubbles.

http://www.ioffer.com/i/14-50x7mm-super-thick-glass-on-glass-water-pipe-beaker-517745744
http://www.ioffer.com/i/12-wubbler-stemline-beaker-7mm-super-thick-water-pipe-524003123

check out more of the glass on ioffer, some really talented artists on there hooking people up with pieces for great prices.

I am actually in the middle of creating a 50"x30" painting to trade for a custom headpiece from one of the sellers on there. VERY cool cat, very down with the cause. He's getting a painting matched to the colorways of his house and in return I am finally getting my custom. fuck yes.

 

[b0]

Mini tree bubbler in action with my Solo:

 

[bluerap00]

Nice cloud Bo! What heat setting was that on?

 

[colieglass]

I love bubblers, but refuse to buy one because none of them hold ice lol.

not true.... VIP Glass makes one... I wish i could find a link, but i always see it at a local glass shop where we sell our products at. it has a seperate jar like chamber with a ground joint lid in between the can of the bubbler and the mouthpiece. the bubbler has like a 36 arm perc, but theyre asking like 600 for it..

 

[b0]

Nice cloud Bo! What heat setting was that on?

It was at 5

 

[SSVUN~YAH]

Just saw these back in stock... http://www.pipesdaddy.com/19mm-Direct-Inject-Glass-Oil-Rig-p/cu-0036.htm

 

[JLG]

not true.... VIP Glass makes one... I wish i could find a link, but i always see it at a local glass shop where we sell our products at. it has a seperate jar like chamber with a ground joint lid in between the can of the bubbler and the mouthpiece. the bubbler has like a 36 arm perc, but theyre asking like 600 for it..

Look like this one

 

[goatgobaahh]

Jesus Christ that beautiful I need one...Where can I find this? Unless yall think I can get someone to make a custom one for me for cheaper. I need that lid to be pretty big though I love stuffing a shit ton of cubes in there.

 

[colieglass]

Look like this one

nice... that is exactly it... they have it at my local shop... pretty dope. its a beast too.

 

[SSVUN~YAH]

Pipesdaddy vapor bub came in hits are quite unique as I've never used a piece so small. This bub has a different perc than I was expecting. It kind of bulbs out at the end with 6 rotating candy stripe style slits. Pretty sharp and oh so tiny. I can palm it and hide the whole thing in my bear claw!

 

[Anonymouse]

Just saw these back in stock... http://www.pipesdaddy.com/19mm-Direct-Inject-Glass-Oil-Rig-p/cu-0036.htm

I'd recommend not buying that. The $40 bubbler is good, but the $50 oil pipe is open at the end of the downstem and chuggy as hell. Basically a straight open tube. Even if you tilt it back (to make the big hole the one deepest under water) and inhale super slow you still can't get the side slots to fire at all. :/

I only bought it as it was like $30 more than buying the glass dome and nail separately and even thought of as that cheap it was disappointing.

Oh, and my nail shattered after like 10-20 heating cycles.

 

[JLG]

Jesus Christ that beautiful I need one...Where can I find this? Unless yall think I can get someone to make a custom one for me for cheaper. I need that lid to be pretty big though I love stuffing a shit ton of cubes in there.

This a double showerhead bubbler from GBD (glassblowersdirect.com) for $149.95

I know they also make custom order so they might replace the second showerhead by an ice chamber.

 

[420HazeCandykushkush]

Hi,

What bubbler should be perfect for my arizer solo i live in europe

http://glassblowersdirect.com/bubblers/ all these bubblers look so nice and cheap but don't know how to pick one... I just look at the best lookin one :s

So if somebody could help me ? Would be great cause i don't have much knowledge of this stuff...

Don't know if some of these stores shipment is harsh so looked up this site they sell in europe:

http://www.grasscity.com/us_en/smok...ngs/scientific-bubblers-1?dir=asc&order=price

The first little ones here are awesome too :

http://www.grasscity.com/us_en/smok...ntific-glass-bubblers-usa?dir=asc&order=price

Found this, nice bubblers and cheap, maybe better for shipment..

http://www.blackleaf.de/index.php/catalog/category/view/s/glass-blubber/id/194/

If anyone else knows great webshops like this in europe share plz

Grtzz

 

[Yanmam37]

Hey FC forums. I'm new here and currently looking for a bubbler. I really liked e leviathan FC bubbler but I wanted something not as big. I like how on the can has the indent for putting your bud or concentrates on there (if you wanted to) but I don't want a bubbler as big. I'm looking for something were the can is 5-6in and the overall length doesn't exceed 9in. Don't want to spend more than $200-$250. Anyone able to stir me in the right direction?

 

[al bundy]

http://www.ioffer.com/i/14-50x7mm-super-thick-glass-on-glass-water-pipe-beaker-517745744

would i need a downstem for say my solo or E-nano/both 14 mm.?

 

[Stu]

would i need a downstem for say my solo or E-nano/both 14 mm.?

Yes, you would.

 

[420HazeCandykushkush]

What do you guys think of this one for my arizer solo ?

http://www.blackleaf.de/index.php/newest-products/blaze-blubber-mit-duschkopfdiffusor-farbig.html

If you wanna check some other product seems the site has some problems with other links i gave here is good one you can click on bubblers and read description http://www.blackleaf.de/index.php/newest-products.html?limit=all

Somebody can help me to choose one cause i really don't have any knowledge of bubblers someboy telled me too much diffusion is not good for arizer solo

Grtzz

 

[mnd99]

If you guys had to pick one out of these, which one would you go for and why? I personally wanted to pick one of those to fit with a PV GonG shorty adapter that goes into a HA 2.2....stuck about the decision

$100

$100

$110

$80

 

[CheeseSandwich]

If you guys had to pick one out of these, which one would you go for and why? I personally wanted to pick one of those to fit with a PV GonG shorty adapter that goes into a HA 2.2....stuck about the decision




$100




$100




$110




$80

are these all from glassblowers direct? I personally like the last one, got a link to it?

mod note: Please do not quote more than necessary. Pictures removed.

 

[Bob Loblaw]

completely depends on your needs.

 

[mnd99]

are these all from glassblowers direct? I personally like the last one, got a link to it?

It's under their Assassin line section.

completely depends on your needs.

I have no needs! I can adapt to any of those glass pieces I just primarly wanted something away from dry hits..Let's say I want to get the one that will give me the smoothest hits among them. Which one should I go for then?

 

[that herb guy]

If it's in the assassin line I'd say that last one probably has a 45(?)mm joint rather than the 14/18 you'd be looking for. I could be wrong, but generally 'build-a-bong' systems like that have really big joints to fit standard size percs.

If it helps, I'm interested in that honeycomb piece. If I chose one out of the listed, that would probably be it for my personal interests. That or the showerhead straight perc in the first photo.