Cheap High Quality Bubbler

[Roger D]

Yes I did catch it, that would be the 3rd piece I get second hand I really don't mind, I kinda like when the piece have its history I'll tell him to give it a good iso bath before shipping I guess. I didn't payed too much attention to that nasty stain.. I'll be asking for a picture of the cleaned piece before shipping to be sure.

$150 for a swiss perc is good deal. The piece seems thick, well built and there is a free nail. Also that is a unique custom made piece. I'll see how it turns. Maybe the vendor want to stick local

Edit :

It looks classy.

Seems like the deal is going on after all

 

[SSVUN~YAH]

Wow, too cool of a deal... I didn't think the mouthpiece would be so nice on that piece! If you ever get rid or decide you don't want, can I have firsts dibs at it???

 

[Roger D]

I'm too much of a collector to sell anything lol, but I'll let you know if my closet gets too much packed

ISO check going on

Also my wicked sands is coming up ! It just arrived in my country

 

[b0]

Just bought this:

http://www.ioffer.com/i/mini-glass-water-pipe-fork-filter-height-15-cm-525900424

A cheap piece to take with my solo everywhere. I remember someone bought it and post a first impresion opinion, but can't find any video. Anyone has one or can made it?

 

[colieglass]

with your fc discount, this one should come out to be 40 bucks ish, i can make it with a female joint for your vape if you prefer... "coupon code: fcheads"

 

[Quetzalcoatl]

That's a two slit upgrid? How tall from base to top of the male joint and from base to top of mouthpiece?

 

[colieglass]

That's a two slit upgrid? How tall from base to top of the male joint and from base to top of mouthpiece?

what up man? havent heard from you in ahwile.
i actually was just going to edit the post, its a two slit up grid in the pic, but i changed it, it is actually down grid now for obvious reasons. it is a nose burner, but its cute and its cheap. id say two inches on average in distance, but they all vary a little cause im making these on my bench torch and not using the lathe. this was just a custom for chads friend and alot of people liked it. so i just kept making em. we nick named this piece little jhan.

 

[Quetzalcoatl]

what up man? havent heard from you in ahwile.
i actually was just going to edit the post, its a two slit up grid in the pic, but i changed it, it is actually down grid now for obvious reasons. it is a nose burner, but its cute and its cheap. id say two inches on average in distance, but they all vary a little cause im making these on my bench torch and not using the lathe. this was just a custom for chads friend and alot of people liked it. so i just kept making em. we nick named this piece little jhan.

I might be in for one in the next week, we'll see Would definitely like to end up with one at some point, especially at that price.

 

[colieglass]

I might be in for one in the next week, we'll see Would definitely like to end up with one at some point, especially at that price.

cool cool.. thanks for the support.

 

[ILoveCollege]

A friend of mine picked up a J - Hook like this and then bought an ashcatcher to go on that. What is nice is how portable it is, and if you want to change how the piece percolates, you just change the ashcatcher. It can also help you as you can start to build up a glass collection and then one day pick up a nice bong and have a lot to work with.

 

[SSVUN~YAH]

A friend of mine picked up a J - Hook like this and then bought an ashcatcher to go on that. What is nice is how portable it is, and if you want to change how the piece percolates, you just change the ashcatcher. It can also help you as you can start to build up a glass collection and then one day pick up a nice bong and have a lot to work with.

Heck ya stack and combine, make new creatures! It's like glass transformers, badass!

Specs on that hot deal of a bub for 40ish bucks!?! Can size, height to mouthpiece, height to top of slide joint, etc...

 

[SSVUN~YAH]

Specs on that hot deal of a bub for 40ish bucks!?! Can size, height to mouthpiece, height to top of slide joint, etc...

 

[colieglass]

-[ Height: 8 Inches
-[ Thickness: 5mm
-[ GonG Size: 18mm
-[ Height to top of silde?: 5-6 Inches

 

[b0]

it is a nose burner, but its cute and its cheap. id say two inches on average in distance, but they all vary a little cause im making these on my bench torch and not using the lathe.

Can you do it with a bent neck? That will help with the noses

 

[colieglass]

Can you do it with a bent neck? That will help with the noses

for a little more cost.

 

[SSVUN~YAH]

-[ Height: 8 Inches
-[ Thickness: 5mm
-[ GonG Size: 18mm
-[ Height to top of silde?: 5-6 Inches

diameter of can and tube?

 

[colieglass]

diameter of can and tube?

28/20mm Can/Tube
Simax Glass
I bought the Glass from D + L Glass on 52nd and pecos in denver colorado at 4:12PM on may 2nd 2013, i initially bought 10 pounds but each piece weight about 1/2 pound, i used a lenz joint that is 19mm, the torch i used was a bobcat, i made the first few on my porch. the diameter of the glass nail is 8mm, it is about 1.33 Inches long, it only fits 19mm Joints, hope that covers all the questions... oh yeah, its medium wall, 5mm.

 

[SSVUN~YAH]

Now that is detailed info, thanks!

 

[JSteez4205]

b0 go with that Collieglass piece over the ioffer piece.. A Hell of A lot cleaner of a look and for basically same price.. If that ioffer piece was going to be your first glass then maybe, but in all honesty, I think You would be more pleased with a Collieglass piece.. I have never tested one, but the looks are clean! I feel like that Fork design on the ioffer piece will not be suitable.. you could pick one of those up at a LHS I would think for like $30.. that's how most pieces like that are priced here in KY. Just my .. It IS all about what YOU want though brother! Happy Hunting

 

[colieglass]

Now that is detailed info, thanks!

i try (<--- Jhan Face!)

 

[b0]

b0 go with that Collieglass piece over the ioffer piece.. A Hell of A lot cleaner of a look and for basically same price.. If that ioffer piece was going to be your first glass then maybe, but in all honesty, I think You would be more pleased with a Collieglass piece.. I have never tested one, but the looks are clean! I feel like that Fork design on the ioffer piece will not be suitable.. you could pick one of those up at a LHS I would think for like $30.. that's how most pieces like that are priced here in KY. Just my .. It IS all about what YOU want though brother! Happy Hunting

That's the first thing I thought when I saw Colie's post, but I did the payment before posting here, so it was too late If not I would have bought one with a bent neck from Collieglass for sure...

 

[FrogBoy138]

Oh No Bo I was trying to think of a way to be nice and ask you to think about not buying that piece. Oh well it's going to work for what you need it for. Maybe one of your friends would like to pick it up for a small discount off what you spent on it.

 

[ipax]

i try (<--- Jhan Face!)

Wow. Great stuff... I wish I'd known about this like 3 weeks ago when I bought my first glass

Any chance I could get one of these: http://www.artfire.com/ext/shop/pro...-_8-10_inches_tall/fine_art/glass/pipes/other

in 18mm? More glass isn't so much in the budget right now, but that's tough to pass up haha

 

[colieglass]

Wow. Great stuff... I wish I'd known about this like 3 weeks ago when I bought my first glass

Any chance I could get one of these: http://www.artfire.com/ext/shop/pro...-_8-10_inches_tall/fine_art/glass/pipes/other

in 18mm? More glass isn't so much in the budget right now, but that's tough to pass up haha

of course, i think we could work that out

 

[FrogBoy138]

^ Colie does have some crazy deals. I really have a hard time not spending cash I don't have myself $40 on that one piece is a must buy even for a poor man.