Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
EverythingsHazy
Well-Known Member
With the gb-186, you don't have the vaporizer right in your face. You can also look into the can and see the bubbling water, and vapor density
olivianewtonjohn
Well-Known Member
Funny Alina ad is identical to the other even says Radiantglass in the ad
Throwie
Well-Known Member
Finally part of the GB187 club.
Took a bit longer to get here, apparently left HK on the 7th and only just got it today.
I'm happy with it though, I like the big base and the glass feels a lot thicker and better made than my other china pieces. Of course I had to run out of supply yesterday, so not able to test it just yet.
http://i.imgur.com/GGkgxGK.jpg
http://i.imgur.com/Ltjrp6d.jpg
Modnote: Edited to display images
Took a bit longer to get here, apparently left HK on the 7th and only just got it today.
I'm happy with it though, I like the big base and the glass feels a lot thicker and better made than my other china pieces. Of course I had to run out of supply yesterday, so not able to test it just yet.
http://i.imgur.com/GGkgxGK.jpg
http://i.imgur.com/Ltjrp6d.jpg
Modnote: Edited to display images
Last edited by a moderator:
Mr. Gweilo 420
Dude
Recently my GB-186 has gone from the scrapheap to daily driver with the e-nano. I love it. It works perfectly and is a serious heavy hitter compared to the D020-W which I also love. I'm using it with an 18mm Joda carbed gong and it just rips!
Herr_Dampf
Well-Known Member
Got my Double Arm Recycler (GB-242) from yingmin5 last friday, I am really impressed. Best recycler design I've seen coming out of china so far. Hits effortless, smooth and never dry. I like it best for dabs but it works great with my Nano as well (I do use a dropdown though, it's a small rig). Very nice function as well. I thougt I was over china glass but yingmin brought me right back.
If you are looking for a dab rig and/or recycler, go for it.
Also, thanks @blankrider for the recommendation.
If you are looking for a dab rig and/or recycler, go for it.
Also, thanks @blankrider for the recommendation.
blankrider
Well-Known Member
Yeah they really nailed it with that recycler. If they would make a bigger version with 18mm female joint and thick glass it would be the best ever.
Whatever member is good at communication with the Chinese and already built a rapport with yingmin should contact him about this. There would not even be a need for sidecar 187 if they built this recycler and priced it around $50
Whatever member is good at communication with the Chinese and already built a rapport with yingmin should contact him about this. There would not even be a need for sidecar 187 if they built this recycler and priced it around $50
Herr_Dampf
Well-Known Member
Chances for this to happen are about as big as the sidecare 187. When somebody comes along and orders a few hundred we might be lucky. My guess is the recycler we are enjoying now is whats left of the Cheech production run, would explain why nobody else has it for sale etc...
I get the feeling there is a strong missconception of the forums spending power and influence on those sellers. The same goes for the sellers perception of us.
vapordab
Medical+FC=Recreational
Me too! The 186-1 and DO20-2w are the only pieces that I use with the nano anymore. The 2w Is great for sipping, and the 186 for...chugging.
I also use them both with a Joda carbed gong,but with that being said: the water displacement is too great on the 186 and I find that my load often times ends up all over the floor. Where do you keep the water level? I stay a little under the second perc. luckily I can still safely use it with my Claisen setup. I think I'm going to need to get a special made carbed GONG with a large diameter carb hole
Melting Pot
Sick & Twisted
I got this from Kathy a couple of months ago.dont know how to post link.Works pretty good only use for dabbing.Quality is allright not top notch not even at chinese standards.
Sorry for the big shitty pics.
vapordab
Medical+FC=Recreational
My problem with this one was that the perc just doesn't have enough room to fire. The result is only the top slits firing, and the piece being very water sensitive. Whenever I handed it to a friend they got a drink! It would be great if it was twice the can size...
I got this from Kathy a couple of months ago.dont know how to post link.Works pretty good only use for dabbing.Quality is allright not top notch not even at chinese standards.
Sorry for the big shitty pics.
oli
Well-Known Member
Have you tried your Crafty with the GB186 or BG187 yet?
I got my double arm an hour ago or so. I've gotta say this is one sweet little piece. Smaller than I originally anticipated but in a good way. The hit is super smooth. With the right water level it feels almost mechanical (if you can picture what I mean. Idunno.... I'm completely vaked!!). Got another sweet little piece too. It's a simple 14mm male bent kneck single turbine perk. Can't remember the number. It's a beefy little sucker, very cleanly made. I'm very impressed with both pieces actually. And that is hard to say coming from an American glassblower.
Good recommendation @blankrider
EverythingsHazy
Well-Known Member
@VaPeD&CoNfUsEd
I was curious about blowback with the Gb-186 and a carbed gong. Could a gong have a right angle bend in it with the gong being at the part on the corner where the air hits first during blowback. You'd be able to block and release the carb with your thumb while holding the gladd piece. Not sure how difficult that is to make.
........ Pretty sure you're referring to his standard Carb'd gong design, which he already makes and sells....
But this is getting off topic........
I'm still waiting for my YQ-42!!! Still no update since October 31st. SunShineStore tells me to keep waiting and that it's because it's their busy season. But it's been 26 days since I ordered! Shit from SSS is never this slow to arrive! I wouldn't complain, but it's a birthday gift for a friend who's birthday was LAST MONTH!
Anyone else having something stuck at "Processed Through Sort Facility" in china status? It's been 18 days with no new updates on the shipment.....
We have a huge flea market here and the Police are ALL OVER sellers trying to pass of knockoff products as the real thing. It is big business , selling fake Gucci bags or Louis Vuitton or Rolex fakes.
I would watch out with that. Someone will know where to find you when they found out you sold them a fake.
I would watch out with that. Someone will know where to find you when they found out you sold them a fake.
flickyourbic
Well-Known Member
We have a huge flea market here and the Police are ALL OVER sellers trying to pass of knockoff products as the real thing. It is big business , selling fake Gucci bags or Louis Vuitton or Rolex fakes.
I would watch out with that. Someone will know where to find you when they found out you sold them a fake.
I don't advertise them as Mobius or anything. I just say "stereo matrix bubbler". The police here have bigger/better things to worry about I'm sure. Good looking out though. I doubt I'll get to that point anyways.
Not a fan of that practice either. It's one thing if they are sold as knock offs but another if people are led to believe they are genuine. That's taking money out of some American glassblowers pocket to be honest. I don't mind china glass but, please don't sell it as American.
Edit: I wrote this before you posted the one above.
Edit: I wrote this before you posted the one above.
weenstoned
Well-Known Member
It seems kind of like a lie of omission if you don't include the word Chinese in the description. Pretty sure a lot of people aren't aware that counterfeit bongs are a thing so seeing a logo (assuming your ads have pictures) will automatically make them think it is legit.
I'm just imagining the police enforcing trademark laws on counterfeit drug paraphernalia. Not a likely thing to happen.
flotntoke
thoroughly vaped
THANKS!!
vapordab
Medical+FC=Recreational
(pirate voice) If vaping with a log be yer desire, one of these thrice pieces ye should acquire.
(left to right; GB186-1, D020-2W, D022)
Seriously though, I don't think it gets much better than these three. I have sold/gifted all of my other pieces that I bought to use with my vaporizers, but will always keep these ones!
(left to right; GB186-1, D020-2W, D022)
Seriously though, I don't think it gets much better than these three. I have sold/gifted all of my other pieces that I bought to use with my vaporizers, but will always keep these ones!
Last edited:
