Cheap High Quality Bubbler

SD_haze

SD_haze

Well-Known Member
natural farmer said:
A friend asked me for my Infamous 40$ bub yesterday to use it for smoking... As much as I love the little bub I had to say yes... I prefer him smoking from a small waterpipe than rolling all the time. Anyway I used the money and some more to fund a 250ml Ehle straight with ice pinches and a diffuser from the same company. I believe it will serve me better as my all day driver than both the Infamous and my Saxo. Saxo feels too much sometimes and you can't just through it in a small backpack without serious protection if needed so. I hope it proves a good buy... All I have heard for the Ehle are praises so... :D Diffusion wise it should be better than the infamous and should provide a bit smoother hits especially with some ice cubes in it. Anybody who has/had both to chime in?
Click to expand...
Depends on the downstem!
The stock downstems most EHLE bongs come with wont diffuse better than 3 skinny slits, but the hand-punched holes EHLE diffused downstem should function awesome.
 
SD_haze

SD_haze

Well-Known Member
(Double post but can't edit)

Just a heads-up on the $40 Vapor Bubbler: I heard back from "Tayyab", does not come with any keck clips this time.
 
SD_haze,
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
SD_haze said:
(Double post but can't edit)

Just a heads-up on the $40 Vapor Bubbler: I heard back from "Tayyab", does not come with any keck clips this time.
Click to expand...

I tried to order then and the emailed me they didn't have any. I wish he would have said we will send them when we get them oh well.

I just emailed them and asked to have them sent when they come in. Haze I think I put my order in before yours but maybe I didn't get the clips in time. If it needs it and they used to send it they should mail them to all of us after they come in. I am sure they will fit in a regular envelope and since plastic won't break. It will cost all of 41 cents or however much a stamp is now.
 
Dreamerr,
F

FrogBoy138

Well-Known Member
Well I got my two SSFG showerhead diff straight tubes with worked slides. They look surreal I have not vaked out of them yet. I got the clip on one of them it was very hard to connect now I don't know how to remove it I think I should have stretched and worked the clip before connecting it. I'm worried please help!!!
 
FrogBoy138,
B

BigDaddyVapor

@BigDogJunction
The Infamous doesn't need Keck clips. Just don't ever grab it by the mouthpiece... it WILL fall. They sent me some, when I ordered... but they were pieces of @#$%, one was broken. They were the real hard plastic kind.

Mike aka oregonglassblower, has actually sent me the best keck clips. Nice and flexible, but strong as Hell. I use one on the Infamous and the other on my SSFG Travel Beaker.

FB... to remove, if they're the plastic ones. Just place one hand to hold it from spinning and be able to give a pull (I grab it by the middle plastic strap connecting the larger/smaller sides), then take a finger and press away and outwards on one of the open ends of the clip. That should spread it far enough to slip off.
 
BigDaddyVapor,
  • Like
Reactions: FrogBoy138
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
Well do BDV, no picking it up from the mouth piece...I think I can remember that. It is good to know I don't need it unless I need to pick it up from the mouth piece...we will see when it comes if that will be my chosen way.

Ok so old school question or gross question. Back in the day I rarely changed my bong water. I was watching your video on rez stuff and you said you change the water every three days. Is that because of smell or grim that tastes bad? Or is it just for the pretty?

Also on the rez stuff, I don't think there was an answer to if it removes more actives then just water if you happen to know.
 
Dreamerr,
B

BigDaddyVapor

@BigDogJunction
The mouthpiece on mine, is a pretty solid connection. While the piece doesn't need keck clips, if available, I would certainly use them. The mouthpiece is a tempting spot to grab. Though, even with the clip... I just broke myself of the urge to grab it there. Its small and light enough, to grab anywhere.

As for the RezBlock, I didn't change my water that much, unless I was traveling back in the day. We used to think it was a good idea, to strain and scrape that nasty black tar when herb was scarce. 3 days was nothing back then. 3 days now? I'd puke. Except for... RezBlock. It doesn't let the residual stick or clump. It breaks it down, that's why it looks so murky in the video.

As for removing other stuff, such as actives in your herb? No. I haven't noticed any change in my medications, nor amount I have to use. If you're referring to things like hard water deposits, I'm not sure on that. I use only distilled water. HOWEVER, once you have given the piece a full clean-out, including removing hard-water deposits (couple nights soaking in Simple Green, should take care of that)... I believe the RezBlock, will indeed block that stuff. It just doesn't let things stick to the glass.

I probably won't keep water/RezBlock in my pieces for more than 2 or 3 days. I mostly likely it, because its reopened my entire glass collection. Not having to worry about ISO washes, when all it requires now, is a warm/hot water rinse... makes using hard to clean pieces, enjoyable once again.
 
BigDaddyVapor,
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
I forgot that was when I combusted and a shit load younger. I suppose with vaping only now it would be gross. I think you have hard water in cali and we have very hard water where I am so how do you clean it. You said you put distilled in to use but do you wash it with distilled. I know if I used regular water it will be one big calcium deposited bubbler.
 
Dreamerr,
natural farmer

natural farmer

Well-Known Member
BigDaddyVapor said:
I probably won't keep water/RezBlock in my pieces for more than 2 or 3 days. I mostly likely it, because its reopened my entire glass collection. Not having to worry about ISO washes, when all it requires now, is a warm/hot water rinse... makes using hard to clean pieces, enjoyable once again.
Click to expand...

I haven't find the need so far to use special products for the water. I just put half a teaspoon of salt in the fresh water and after 1 or two days of usage it gets crystal clear again with some hot water and dish soap. When it starts building up salts from the water, a quick shake with some vinegar gives it the new shine again.. ;) Why the RezBlock if you clean your pieces every or every other day?
 
natural farmer,
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
You know damn well I don't want to clean that often. Once a week if I must but won't be happy. First we will see how much I use it.
 
Dreamerr,
B

BigDaddyVapor

@BigDogJunction
Dreamerr said:
I forgot that was when I combusted and a shit load younger. I suppose with vaping only now it would be gross. I think you have hard water in cali and we have very hard water where I am so how do you clean it. You said you put distilled in to use but do you wash it with distilled. I know if I used regular water it will be one big calcium deposited bubbler.
Click to expand...

Rinse with plain old tap. The only piece that seems to have issues with that, so far... is a bubbler that shall remain nameless. I'm soaking it in some Purple Power right now, then I'll try again.

natural farmer said:
I haven't find the need so far to use special products for the water. I just put half a teaspoon of salt in the fresh water and after 1 or two days of usage it gets crystal clear again with some hot water and dish soap. When it starts building up salts from the water, a quick shake with some vinegar gives it the new shine again.. ;) Why the RezBlock if you clean your pieces every or every other day?
Click to expand...

That's what I'm trying to avoid. Way, too involved.

When I'm ready for a water change out, or if I'm going to store more than a few days... rinse w/ warm water. Refill... or back in my cabinet... done.
 
BigDaddyVapor,
Malloy1

Malloy1

New Member
I ordererd Sunday and added keck clips and my bub should arrive tmrw and I never got anything saying they dnt have clips soooo
 
Malloy1,
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
Yea...cause I am supposedly getting it tomorrow and if tracking is wrong the next day. I don't want to just stare at it. I suppose rinse it from dust and fill with bottled water as per BDV ok so it isn't distilled lol and get to vaping.
 
Dreamerr,
mmenzie

mmenzie

My friends call me "Menz"
i wonder how this knockoff bub would do with a Ti nail and male to male adapter?? would the two together be higher than the mouthpiece?? here's why i am asking. i bought a Ti nail and male to male adapter and was using it on my ZOB bubbler. the dab deposits were building up in my zob just under where the mouthpiece is jointed to the can. no brush can get to this area (at least not one that i have). after much soaking i finally got that area clean and i stopped using my zob for dabs. i still get buildup in that area when using my zob for vaping with my solo and DBV though... just not as bad. i wonder if the rezblock would help with that??

anyways..... i went to the LHS where i bough the nail and told her i wanted a small bubbler for it. she grabbed this small $40.00 piece and said it was perfect for the nail. i get home and put the male to male adapter in, and then the nail and dome in the adapter. now my globe and nail are higher than the mouth piece so when i use this piece i have to crane my neck and have to look upwards at the nail while i attempt to put my dab on the nail. it is VERY uncomfortable. i know the lady at the LHS wont work with me cause its used and $40.00 is not all that bad of a loss (its still a loss though). but now i am on the hunt for a SMALL bubbler that i can do dabs in and the mouth piece has to be at least parallel if not higher than the nail and globe when in the male to male adapter.

here is a link to the LHS i bought it from and the exact piece i bought so you can see how the nail and dome are way higher than the mouth piece. i bought it in the store before i found this pic online so i wasn't sure the day i bought it till i got home and was too lazy to return it

http://www.smokegrindroll.com/shop/...&shop_param=cid=241&aid=BUBOILSETTITANIUM001&
 
mmenzie,
Malloy1

Malloy1

New Member
The infamous should be good for you if you want cheap, the link is around here some where, it's only 40 and better quality than the bub u got at ur lha
 
Malloy1,
mmenzie

mmenzie

My friends call me "Menz"
Malloy1 said:
The infamous should be good for you if you want cheap, the link is around here some where, it's only 40 and better quality than the bub u got at ur lha
Click to expand...

but i wonder about the height of the nail in comparison to the mouth piece after inserting the male to male adapter in the joint. as you can see in the pic... the nail is much higher and when you are dabbing... you have to look up and for me it is very uncomfortable. if the nail was lower or at least parallel i might not have the same uncomfortability
 
mmenzie,
Live-N-Learn

Live-N-Learn

Higher, Higher, Baby...
Malloy1 said:
http://www.pipesdaddy.com/ProductDetails.asp?ProductCode=VP-0022&CartID=1

I don't think you'll have that problem with this bub
Click to expand...

I pulled the trigger. I couldnt resist, I really really wanted a bubbler seeing peepz on here with all expensive fancy ones and then theres the :bowdown: VapeXhale Cloud which I am envious of. I am still a novice, in my first 6 months of vaping and the transition is now pretty apparent. I went from blunts and more blunts, to vaping and now wanting to have an even lighter, cooler effect on my throat which has become more sensitive. I didnt want it to go out of stock before Friday, I was worried it would so I had to do what I had to do. (Aka my excuse to buy it :))
 
Live-N-Learn,
  • Like
Reactions: SD_haze
JSteez4205

JSteez4205

aka Gordon NugzB
mmenzie said:
but i wonder about the height of the nail in comparison to the mouth piece after inserting the male to male adapter in the joint.
Click to expand...
I just picked up my Vapor Brother Hydrator from my LHS last night. I'm up at work till 9pm tonight but will fit it with my male to mail adapter and nail and take a pic for you if you don't get any responses before then. From visuals I'm getting in my head I picture the nail/dome sitting right about eye level as opposed to higher like you are currently experiencing.
 
JSteez4205,
You must log in or register to reply here.
Top Bottom