Cheap High Quality Bubbler

ou812?

Well-Known Member
I have a 60T with Stereo Matrix



I was told that the stuff is made by Apollo Glass in New York. It COULD be Chinese but its thick and flawless. I really dont think this is Chinese.



It is reinforced, maybe you cant see it in the picture. Its got a connection between the can and the fixed stem.

I cant take credit for this one. Someone posted a link to the site and a different piece about a week ago. I found this piece just poking around on their site. Its a fantastic piece and hasnt disappointed yet. It comes with a klip to keep the mouth piece attached to the can.


Correct but not ALL. I only stated some need it. Some of the oil/concentrate rigs which I use for vaping due to size and the flava sava factor of a small can, could use reinforcing. There's one or two of smaller rigs that I would buy but need it on the MP and the intake here's one http://www.glasspipemaster.com/glass-pipe/5mm-diffuser-glass-bubbler.html that I like but know that it wouldnt make the 2 week mark in my hands. A few more also but I do understand that they're not built in mind for a vape sitting on top of the intake, but as mentioned P.M. its all good:), I like his work.He will most likely oblige on some and even if he wants a few $$ more,I would be open for buying his work:tup:
sweet little rig and not priced too bad, clean work on his perc's, I bet all of the slits on yours and this little gem fire away with out a glitch and are as smooth as a babys ass to hit..........:peace:
 

Meghan

Well-Known Member
In the comparison shot to the real Toro in the pics on AliEx it said a height of 5.5". The neck and mouthpiece also looked smaller than what I see. I'm just on a crazy kick for very small pieces.

Speaking of which, I went in on the Simba Concentrate set on Massdrop. That is an incredible price for a small fritted rig and a worked pendant piece!

I just measured and the piece is 6.5" at the very top of the mouthpiece. The can itself rings in under 3".

Here's a pic with some vapes and other glass for comparison. That's the D020 on the left, my 6" recycler on the right, the little Toro knockoff in the middle.

6QFGARX.jpg
 

GSH

On a Möbius plane
I have a 60T with Stereo Matrix



I was told that the stuff is made by Apollo Glass in New York. It COULD be Chinese but its thick and flawless. I really dont think this is Chinese.



It is reinforced, maybe you cant see it in the picture. Its got a connection between the can and the fixed stem.

I cant take credit for this one. Someone posted a link to the site and a different piece about a week ago. I found this piece just poking around on their site. Its a fantastic piece and hasnt disappointed yet. It comes with a klip to keep the mouth piece attached to the can.
Here is the ioffer store, loads of options :)

http://www.ioffer.com/selling/americanglassstudio

:)
 

Deadshort480

We're here to fuck shit up.
I just measured and the piece is 6.5" at the very top of the mouthpiece. The can itself rings in under 3".

Here's a pic with some vapes and other glass for comparison. That's the D020 on the left, my 6" recycler on the right, the little Toro knockoff in the middle.

6QFGARX.jpg
You do have tiny hands. :D

Thank you so much for the comparison pic. That helps a lot. :nod: :tup:
 

Deadshort480

We're here to fuck shit up.
Listen up! You do not receive two pieces for adding the additional funds on Massdrop. When you are adding the extra charge you will be receiving only that piece. For example, if you add the extra $29 on the Flower Fritter you are changing your order from the Fritted piece to the Matrix piece. If you add the extra funds to the concentrate Fritted piece, you will only receive the pendant.

I don't know if anyone else was confused, but I sure was.
 

equatorgringo

Well-Known Member
Listen up! You do not receive two pieces for adding the additional funds on Massdrop. When you are adding the extra charge you will be receiving only that piece. For example, if you add the extra $29 on the Flower Fritter you are changing your order from the Fritted piece to the Matrix piece. If you add the extra funds to the concentrate Fritted piece, you will only receive the pendant.

I don't know if anyone else was confused, but I sure was.

Oh shit thanks for clearing that up!!! Was definitely not on the same page there...
 

Deadshort480

We're here to fuck shit up.
I guess it's all good for now. If the drop gets to the lowest that means I only paid like $125 for a worked pendant. If it does not have nice color and horns like it shows in the description I'll dispute. I know it says that color and size may vary, but I don't expect them to subtract anything from what is shown although I would expect color to vary from piece to piece or batch to batch.
 

TherealVaporblunt

Well-Known Member
Manufacturer
Oh shit thanks for clearing that up!!! Was definitely not on the same page there...
This is correct. The matrix style is more than the frit.
I guess it's all good for now. If the drop gets to the lowest that means I only paid like $125 for a worked pendant. If it does not have nice color and horns like it shows in the description I'll dispute. I know it says that color and size may vary, but I don't expect them to subtract anything from what is shown although I would expect color to vary from piece to piece or batch to batch.

Are u talking about the simba pendant?
 
Last edited:
TherealVaporblunt,

Deadshort480

We're here to fuck shit up.
This is correct. The matrix style is more than the frit. The matrix style also has a male joint I believe.


Are u talking about the simba pendant?
Yes sir, I am. I love the pendant, but I just want to make sure I'm going to get what I'm seeing. Worked front, worked mouthpiece, worked dome, perimeter horns. It says in the description there will be no logo.
 
Deadshort480,

TherealVaporblunt

Well-Known Member
Manufacturer
I guess it's all good for now. If the drop gets to the lowest that means I only paid like $125 for a worked pendant. If it does not have nice color and horns like it shows in the description I'll dispute. I know it says that color and size may vary, but I don't expect them to subtract anything from what is shown although I would expect color to vary from piece to piece or batch to batch.

Are u tal
Yes sir, I am. I love the pendant, but I just want to make sure I'm going to get what I'm seeing. Worked front, worked mouthpiece, worked dome, perimeter horns. It says in the description there will be no logo.

Yeah, I think you'll be quite happy. We sold like 30 at la canncup, it was a big hit. They are pretty consistent, I haven't seen the pic yet but I'm gonna look right now.

I can answer most questions for you as we are working quite closely together. There's also a @realsimbaglass on IG, that's not me, he just totally jocked my style. Just to clear that up.....

Edit: I just looked, that's a nice one but they all look like that.
 
TherealVaporblunt,
  • Like
Reactions: SSVUN~YAH

DieHard

Accessory supplier
Accessory Maker
Talking about the Simba drops, what are some opinions on the frit disc vs the matrix perc?
Well, I am going for the matrix, mainly because I do not have one and don't really want to spend the $$$ on a möbius. As for real reasons I have heard that frit is hard to clean to like new status and it seems that the general consensus is that a frit is smoother but less flavorful.
 

Deadshort480

We're here to fuck shit up.
Doesn't really seem like it'd be problem for me since I vaporize 90%+ of the time and I wouldn't smoke out of the frit disc anyway. Anyone here have a fritted disc to chime in?
I've got a couple fritted pieces and the trick is to clean them before they have a chance to gunk up too much. ISO to keep the frit clean, PBW for sparkling clean.
 
Top Bottom