Cheap High Quality Bubbler

MegaMan2k

Well-Known Member
BTW, a different subject: Broken glass,

I was wiping water off my Klein from CCG, And the neck just snapped clean off- (Have never bumped this pibe into anything etc)

Whats CCG's stance on these kind of things? think they would be able to help me out with a free piece or something like that? Or should i just forget about it before i even try? xD
 
MegaMan2k,

LesPlenty

Well-Known Member
Company Rep
Whats CCG's stance on these kind of things?
It depends, how long have you had the piece in question?
If you have only had it a week or 2 it might be worth a try, bugger it, have a try anyway seeing how CCG is so much dearer than most on DHGate.

Are you Tasmanian mate?
Yeah, I am a little Tassie devil.:evil:Born and raised, same as old `in like Flynn' Errol Flynn, that is.
Poppy Capital of the world (Tassie supplies half of the worlds poppy straw) Not bad for a little island not that far north of the south pole:tup:
 

UnidenWallet

Well-Known Member
Just for clarification. Hope I'm misunderstanding. The ISO/water jar isn't completely separated from the Q-Tip part of the jar? Is there an open connection and if yes, why tf??

It is separated ;)

ZKjY6pp.png


As long as the water level is high it will be fine, but the excess water drains into the main body and you will probably have to tip it to wet the q tip when the water level falls. It's basically a bubbler with no perc.

I believe the bottom reservoir is leveled with the bottom of the 18mm joint, from this photo. As soon as I receive the first jar from the seller, I will let you guys know. Hopefully his Quality Control will be good at keeping the bottom part leveled for the rest of production

Ld37ddo.jpg
 
Last edited:

Ramahs

Fucking Combustion (mostly) Since February 2017
I definitely have too much time, money, and weed!!! :rockon::tup:

Unfortunately the possibility of any or all three of those variables could be taken from me at any time really, so I give thanks and praise and appreciate that I still have something that i'm passionate about! :D

I'm with you there.!
 

LesPlenty

Well-Known Member
Company Rep
Design 2 is the one pictured just above, it has the reservoir under the qtips that is attached to the 18mm joint, hopefully the production units will have a joint nice and low so no tipping will be needed.
 

MegaMan2k

Well-Known Member
Have anyone in europe had success with the free shipping yet?

Im currently waiting for the seller to get back to me via dhgate messages lol xD..
 
MegaMan2k,

biohacker

HREAM
Design 2 is the one pictured just above, it has the reservoir under the qtips that is attached to the 18mm joint, hopefully the production units will have a joint nice and low so no tipping will be needed.

I haven't even had my morning sesh yet...BUT.... i'm lost....anyone please help! Hogni asked the question.... then the reply was that it IS separated? This would imply iso/water only going into the vertical column of the joint. Not passing into the bong compartment..

Based on Hogni's question, and unidenwallet answer....tipping should be irrelevant because there wouldn't be anything to tip!
 
biohacker,
  • Like
Reactions: Hogni

LesPlenty

Well-Known Member
Company Rep
Clear as mud :tup: I would say, go with the listing pictures, hopefully the better more detailed pics will help. (they were going to be updated)
All being said, if the qtip part is too high for your preferences you could always cut a round bit of cardboard and shove into the bottom of the unit.
 
LesPlenty,

biohacker

HREAM
Clear as mud :tup: I would say, go with the listing pictures, hopefully the better more detailed pics will help. (they were going to be updated)

Pictures aren't going to help, we need actual confirmation of the function...which the pics simply cannot illustrate. It would seem stupid to me to have to put that much iso/water in just for qtip blotting, way overkill... so i'm hoping i'm right, and there is just enough room for fluid in the vertical column, as it appears unidenwallet has stated. If so, i'm pulling the trigger (again)! :lol:
 
biohacker,
  • Like
Reactions: Hogni

LesPlenty

Well-Known Member
Company Rep
Maybe he could do some pictures with colour dyed water in each to show how the first one holds about 15ml and the second one with about1 100ml :doh:. Maybe we need my wife to explain(she used to be School of the Air teacher and is good at explaining shit without seeing it)
 
LesPlenty,
  • Like
Reactions: Summer

biohacker

HREAM
Maybe he could do some pictures with colour dyed water in each to show how the first one holds about 15ml and the second one with about1 100ml :doh:. Maybe we need my wife to explain(she used to be School of the Air teacher and is good at explaining shit without seeing it)

Great idea! You're so smart! Makes up for your brain fart yesterday! :lol:
 

LesPlenty

Well-Known Member
Company Rep
Long distance education for outback kids, in the early days a person had to peddle a bike to provide power for the HF radio, now they are trialing robotic type stuff, who says we are backward down-under.
 

LesPlenty

Well-Known Member
Company Rep
That`s him, once we get confirmation the bottom of the joint is nice and low so no jiggle, jiggle needed, I am in for sure, could have used today instead of pouring iso every where just to get a lid full:rant:
LabPong
I like your art work, maybe buy a couple, get some paint on em and sell them as art for $50 ea.
 
LesPlenty,
  • Like
Reactions: biohacker

MegaMan2k

Well-Known Member
I just got the free shipping enabled, so mine should be on route too,
this is one of the things i would never gotten if it wasn't available this cheap i must admit lol..
in the sense that i always felt the 50-100$ ones was too overkill for me
 

Hogni

Honi soit qui mal y pense
I don't know whether we've already seen this device from VDNM, the AKW from EHLE, but I don't think so.
€103, is that still cheap? It's a collab of EHLE and VDNM and available exclusive at VDNM. I like it's simple design and versatility pretty much and guess it's an awesome flavour device. But look yourself

03327616ed39e1b0fbba89f8619a87b9.jpg



beb431fe54156afaa2b4d95e86ed428e.jpg



3a5c954fcef2a64f40b63de57704cdab.jpg


63cb9907dab6c8c95c1146ad1e0844a8.jpg


94858a8208afac92917cd1b27a134ec6.jpg



633e4906cddaa370f93cab13ab110883.jpg


Body
H (to the joint) 150mm
D 110mm
Joint 18mm
5mm thick

MP (something for your liking, @ataxian ?? :wave:)
14mm (18mm adapter incl.)
L 130mm
bent or straight

STEM
L 145mm
Open or 13-holes diffusor

A bit out of my price range but really very tempted...
 

Flower of empathy

Sometimes to stupid to become a fool
Accessory Maker
I'm searching for my old aromed a pretty specific styled piece
That's almost it:
glass-bong-oil-rigs-recycler-4-inch-high-with-14.5mm-joint-glass-water-pipe-with-honeycomb-perc.jpg


it's 4 inch tall (or are there even 3 inch ones?), but i want a female connection (it should be as low as possible) and the sidearm more angled/just a hose connector and maybe a bit wider foot...
Anyone got something in that direction :wave:?
 
Last edited:
Flower of empathy,
  • Like
Reactions: SSVUN~YAH

Flower of empathy

Sometimes to stupid to become a fool
Accessory Maker
yes, i also don't like whips to much but with the aromed it's somehow different - it's nice for more people, i love it for watching movies with some friends etc
My thinking is smaller = lower center of gravity...and the painful memory of wrecking a Roland Jupiter(~3k vintage sinth) with a bong
 
Top Bottom