Chaos by Phattpiggie

coolbreeze

coolbreeze

Well-Known Member
ColdAssistant said:
What coil will you be using?
Click to expand...
The 25mm XL Cobra coil and a Disorderly Conduction Cobra PID.
www.disorderlyconduction.com

DC Cobra Coil Made By Disorderly Conduction

DC Cobra Coil. Enjoy a perfect temperature and untethered range of motion!! These are intended to be used as heating stations for your Quartz Buckets, Slurpers, Towers & Blenders. One Year Warranty. Most reliable, affordable and accurate heating sources in the industry. Team it up with one of or...
www.disorderlyconduction.com
www.disorderlyconduction.com

DC Cobra 3D Printed E-Nail Controller

3D Printed Digital E-Nail Controller. Two-year warranty on internal parts. Made to work perfectly with our DC Cobra Coil. Shipping usually within 48hours. Great Torch-less option to never buy butane again. No more open flame. Heat your quartz banger consistently at the right temperature without...
www.disorderlyconduction.com

Edit: Looks like there's an AliExpress option as well (the Tiodw Pro is pretty fun, too). Check the compatibility choices:
 
Last edited:
ColdAssistant

ColdAssistant

Well-Known Member
coolbreeze said:
The 25mm XL Cobra coil and a Disorderly Conduction Cobra PID.
www.disorderlyconduction.com

DC Cobra Coil Made By Disorderly Conduction

DC Cobra Coil. Enjoy a perfect temperature and untethered range of motion!! These are intended to be used as heating stations for your Quartz Buckets, Slurpers, Towers & Blenders. One Year Warranty. Most reliable, affordable and accurate heating sources in the industry. Team it up with one of or...
www.disorderlyconduction.com
www.disorderlyconduction.com

DC Cobra 3D Printed E-Nail Controller

3D Printed Digital E-Nail Controller. Two-year warranty on internal parts. Made to work perfectly with our DC Cobra Coil. Shipping usually within 48hours. Great Torch-less option to never buy butane again. No more open flame. Heat your quartz banger consistently at the right temperature without...
www.disorderlyconduction.com

Edit: Looks like there's an AliExpress option as well (the Tiodw Pro is pretty fun, too). Check the compatibility choices:
Click to expand...
Thank you! I believe the DC cobra coil will work with a CH pid I already have…
 
phattpiggie

phattpiggie

Well-Known Member
Accessory Maker
The Chaos core has been something that's been worked on for quite a while now.
The first outing saw the core in a cordless log form, @Shit Snacks.
After the TA came together it seemed only right to adapt it for butane use. Or it'll sit in a 25mm axial coil.
The bowl is 23.5mm wide, 15/16".
Nice large surface area exposing more trichomes to the incoming hot air.
It's approximately the volume of 8 VC bowls. TA adapters are included.
There are approximately 400 3mm borosilicate beads in the core. Plenty of mass and that all important hot surface area.
Limited number of Cherry available at @VGOODIEZ or message me here.
There will be more like the Walnut coming when I get time away from TA parts😉
 
VAPEHUNTER

VAPEHUNTER

Well-Known Member
Bababouy said:
Just to clarify my earlier question. Does anyone know if this will work with 22mm diffuser bowls/injector bowls?
Click to expand...
I just got confirmation. The Chaos will work with 22mm bowls.
“In case you were wondering it does have compatibility with other 22 mm bowls as well so if you already have a glass bowl or perhaps a shovelhead you are good to use that too!”



 
HughJundys

HughJundys

Waistband Optimizer
Staff member
20240210-152219.jpg


@VGOODIEZ brought Chaos to my house.
 
Oden

Oden

Well-Known Member
Hello everyone.
Is there a solution to buy this vape other than going through vgoodiez? I'm in Europe and the delivery costs plus customs would hurt my wallet too much
 
Vehmic

Vehmic

Bogwood Ent
phattpiggie said:
@Vehmic when @VGOODIEZ received the first one we did a video call and I regret not having a copy of it.
The first time they hit it was with a big Blazer, no test run just straight in.
No problem getting big clouds. As with the TA it's very forgiving.
Click to expand...
Thanks for the prompt reply,

Is there a stovetop method like a moka pot? I have a romantic vision of moseying over to the stove to brew my friends a bowl.
 
coolbreeze

coolbreeze

Well-Known Member
Vehmic said:
Any Torch users of the Chaos care to chime in? I am really digging the looks of this device but am not ready to dive into the world of PID's and Coils.
Click to expand...
phattpiggie said:
@Vehmic when @VGOODIEZ received the first one we did a video call and I regret not having a copy of it.
The first time they hit it was with a big Blazer, no test run just straight in.
No problem getting big clouds. As with the TA it's very forgiving.
Click to expand...
Can you or @VGOODIEZ share suggested timings?
 
coolbreeze,
VGOODIEZ

VGOODIEZ

Home of the Heavies
Retailer
Zillacon said:
@coolbreeze I've been torching it today, and I've only combusted once :cool:

Using a double blue dragon torch it's about a 15-25 second blast. Still trying to get it perfect. Once heated up it only takes a quick blast.
Click to expand...
Yeah it's been a little while since I've been on the torch but I don't think I ever did it more than 30 seconds. It's pretty forgiving and if you pay attention to the vapor you should have a pretty good indication if you're riding a line too much or if you are ready to rip freely. I have been using it mostly on my Cobra coil or Zenleaf heater which I really like because it's always ready, there's no noise to heat it up and it's always perfect temperature right as soon as you pick it up.
 
You must log in or register to reply here.
Top Bottom