Carta by Focus V

[PhreedomPhries]

I’m really not too concerned about the taste and more about the vapor production.

To those divorcing taste from vapor production, you’re doing it wrong, and welcome to the marijuanas. So help our future. Just kidding. But also, wow.
#lessismore
#redhotbangersclub

Donald Trump smokes mids and dabs Red Hot Bangerz.

 

[Ky-shun]

To those divorcing taste from vapor production, you’re doing it wrong, and welcome to the marijuanas. So help our future. Just kidding. But also, wow.
#lessismore
#redhotbangersclub

So... you have no reason to why a difference in 4 degrees is causing this? I was looking for help not critism.

Edit: Not constructive critism at that.

 

[PhreedomPhries]

So... you have no reason to why a difference in 4 degrees is causing this? I was looking for help not critism.

As I stated above, I don’t believe the temperatures have been identified quite correctly yet. And I am still looking forward to being able to dial this device down, as a lower temperature is one of the areas where this device should be able to particularly shine (soon as I can get the app)

 

[Ky-shun]

As I stated above, I don’t believe the temperatures have been identified quite correctly yet. And I am still looking forward to being able to dial this device down, as a lower temperature is one of the areas where this device should be able to particularly shine (soon as I can get the app)

Thank you. I am going off the 626 and 630 that were posted here. And like I said, I don’t have the app working yet, so once I get that going, I’ll pop out the heat gun and make sure of things

 

[PhreedomPhries]

Thank you. I am going off the 626 and 630 that were posted here. And like I said, I don’t have the app working yet, so once I get that going, I’ll pop out the heat gun and make sure of things

Are you able to get a read that approximates what the temp must be with your heat gun? Is it an infrared type? I cannot get an accurate read for some reason

 

[Glass Pound]

Added some color to the factory carta glass yesterday.
https://www.instagram.com/p/BwH8s__nrnf/?utm_source=ig_share_sheet&igshid=1xi57fxxha4n9

 

[FocusV]

A lot of the probs and heat guns out on the market are pretty bad at reading oven temps. I use a special prob made specifically for testing our vape ovens myself. I will be doing a stream today in a bit for those interested in watching!

 

[freddiegibbs]

Totally agree that the pre-set temps are weird and inconsistent, even in the final release. Seems like they just picked 4 random temperatures. Couldn't imagine ever wanting to use above level 2, regardless of what cup or material I'm putting in there. It's already too hot for me with the titanium. But also don't see much use for level 1, which just doesn't get hot enough.

 

[invertedisdead]

Totally agree that the pre-set temps are weird and inconsistent, even in the final release. Seems like they just picked 4 random temperatures. Couldn't imagine ever wanting to use above level 2, regardless of what cup or material I'm putting in there. It's already too hot for me with the titanium. But also don't see much use for level 1, which just doesn't get hot enough.

Exactly.

Realistically it only has TWO temp settings.

 

[Gakiya309]

A lot of the props and heat guns out on the market are pretty bad at reading oven temps. I use a special prob made specifically for testing our vape ovens myself. I will be doing a stream today in a bit for those interested in watching!

Can I please get a response regarding my burned out atomizer?

 

[FocusV]

personally i use pretty much only level 2 sometimes level 3. not the popular opinion haha but I do prefer denser hits over taste (for myself anyways) if im using the app then i will probably level out around 500F

@Gakiya309 sure will respond today

 

[Hoosier]

A lot of the probs and heat guns out on the market are pretty bad at reading oven temps. I use a special prob made specifically for testing our vape ovens myself. I will be doing a stream today in a bit for those interested in watching!

Your IG live streams don’t seem to be available after the fact (or you haven’t done any in the last week or so?)

 

[Ky-shun]

Exactly.

Realistically it only has TWO temp settings.

Yeah this seems to be the case.

Hopefully the app will improve this, cause right now my v1 Unit with a v2 Atomizer (Level 1) is heating better than my v2 Unit with the v2 Atomizer (Level 2).

Edit: This is of the 626/630 assumption

 

[Fkn0wned]

Any updates with the app?

You stated first thing this morning?

 

[maxvapor710]

I checked my atomizer with a thermal camera, I can't read any temperature above 360F on the coil on any of the settings and I can't get a hit either

 

[Hoosier]

I checked my atomizer with a thermal camera, I can't read any temperature above 360F on the coil on any of the settings and I can't get a hit either

Bum atomizer on brand new rig...the worst!

 

[maxvapor710]

Seems more likely to be the base unit given that it stops at the same exact temperature on all 4 settings, the atomizer disk appears fine under microscope

 

[Gakiya309]

Seems more likely to be the base unit given that it stops at the same exact temperature on all 4 settings, the atomizer disk appears fine under microscope

Hmm..kinda sounds like mine except my atomizer produces zero heat at any of the levels. Hoping a simple atty replacement is all I need..

 

[Hoosier]

Seems more likely to be the base unit given that it stops at the same exact temperature on all 4 settings, the atomizer disk appears fine under microscope

Best of luck to you either way.

No difference between power levels, just liquified concentrate on the bottom of the cup was how 2 of my v1 atomizers acted when they died.

 

[maxvapor710]

I guess I will find out in a few days, have a new atomizer on the way

 

[FocusV]

Well knowing my luck of course the Android File they gave me seems to be corrupt. I have already reached out to get the updated android tonight. I cant test the iOS upgrade so anyone with an iOS device DM me so I can send you the file direct for your testing. I think there is a app i need to use to get that setup for you to use on iOS manual install but again hard for me to test without a device :/ but more then willing to work with any Apple guys out there to get it going for everyone!


Attys:

We will be adding the heating elements as well as an Atty repair kit to the site next week. The repair kit will have any tools needed to do the job easily (good set of cutters, tweezers and some ceramic heaters etc..) we will also add the actual heating element to the site as well. for basically like $5.00 you will be able to get 4 to 5 heating elements that way if you prefer long term you can just replace that portion. the housing of the atty should almost always be fine. its 100% of the time going to be a ceramic issue if there is an issue.
(still working on the everlast atty. making some progress will post some details when its closer to prototype phase.)

We will still also have the subscription option available! which will include such items as the heating elements, attys, buckets, carb caps etc...


Pretty close to the Dry Herb Atty getting out to the beta guys! I am stoked to get that thing up and out there.

 

[Dabarosa]

Well knowing my luck of course the Android File they gave me seems to be corrupt. I have already reached out to get the updated android tonight. I cant test the iOS upgrade so anyone with an iOS device DM me so I can send you the file direct for your testing. I think there is a app i need to use to get that setup for you to use on iOS manual install but again hard for me to test without a device :/ but more then willing to work with any Apple guys out there to get it going for everyone!


Attys:

We will be adding the heating elements as well as an Atty repair kit to the site next week. The repair kit will have any tools needed to do the job easily (good set of cutters, tweezers and some ceramic heaters etc..) we will also add the actual heating element to the site as well. for basically like $5.00 you will be able to get 4 to 5 heating elements that way if you prefer long term you can just replace that portion. the housing of the atty should almost always be fine. its 100% of the time going to be a ceramic issue if there is an issue.
(still working on the everlast atty. making some progress will post some details when its closer to prototype phase.)

We will still also have the subscription option available! which will include such items as the heating elements, attys, buckets, carb caps etc...


Pretty close to the Dry Herb Atty getting out to the beta guys! I am stoked to get that thing up and out there.

I have an iPhone X on iOS 12.2 I have a buddy who’s a software engineer with me and I’d love to try and get the app working

 

[freddiegibbs]

Cold loaded .15g in quartz level 2 and no spillage into the atomizer or onto the heating plate like when I hot loaded, though a good amount did wind up on the bottom of the carb cap. Several full cycles of rich, delicious vapor. Highly recommended

 

[lemonhead]

@FocusV I pre-ordered a carta from thedablab.com. Do you know when stores should be receiving their shipments?

 

[LTBOOKEM]

Last night I was able to get the app to work on my old Galaxy S5. It wouldn't work unless I accepted all three permissions. Im not doing that to my normal phone. I gotta play with the app more tonight.