Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Sale is live early, beat the rush.. I got an order in at 10:31 pm EST 4-19 w valid 420 code..
I can't wait to try out my new flowerpot showerhead!
Edit, abt shipping.. cost me extra $16 for regular, or $19 for express. Express required a sign for delivery, reg did not.. I live in FL, so same time frame.. estimated 3-4 days
I can't wait to try out my new flowerpot showerhead!
Edit, abt shipping.. cost me extra $16 for regular, or $19 for express. Express required a sign for delivery, reg did not.. I live in FL, so same time frame.. estimated 3-4 days
Last edited:
Roth
Pining for the Mountains
Appreciate the heads up, just got my order in too.
Ended up ordering:
Shower Head starter kit
Quartz Wrap Around set
Extra SiC dish
Extra 20mm coil
Double Weave Ti screens
Got an extra coil so I can just leave a coil attached to both the SH and WA and not have to change things out when I want to switch between them.
Been eying the FP for months, just been holding back til the 420 sale. Glad the wait is over!
ambertrichome
Well-Known Member
It’s now $108 postage to Australia from $65 pre 420 sale...ouch
seaofgreens
My Mind Is Free
I'm sure this has already been answered. I looked back a few pages or so, but didn't see anyone else recently ask:
Does the D-Nail Halo carb cap work with the Showerhead or would I need the NV cap?
Does the D-Nail Halo carb cap work with the Showerhead or would I need the NV cap?
![:\](/i/s/hmm.gif "Hmm :\")
Likes2vape
Well-Known Member
You need the showercap.
seaofgreens
My Mind Is Free
Well too bad it is sold out for this sale! Oh well. Hmm... If I am just planning on using it for flower, is the cap still important?
Ville23
Well-Known Member
Damn...And I thought the $16.23 shipping to Colorado was a bit insane!
They should really try to find some cheaper shipping methods.
But either way, after reading through most of this thread,
I finally have a shiny new FP SH starter kit heading my way...WhooooooooHoooooooooo!
Happy 420 to me!!!
And to you guys too, of course
Last edited:
ambertrichome
Well-Known Member
Yes unfortunately there is only one option and it’s USPS priority shipping at US$108 which comes out at approximately $140 Australian
btka
Well-Known Member
In my opinion as long as you using flowers it is not important.... it only restrict the airflow and therefore the air you draw trough the showerhead and then trough the flowers will be hotter but you can achieve this without showercap when you draw slower... I never use the showercap... if you plan to use concentrates and so it would be important as far as I know...
Nowadays I use my showerhead with an eq arizer basket screen ideal for microdosing (0.025 to 0.05g) big dense clouds at 777F it works for me better then with the normal screen and you need less herb... for people who want to microdose I recommend it... I get one really nice hit from 0.025 and alwyas have the full taste...
hope flowerpot will come up soon with a microdose bowl...
this vape is the best vape I had until now and I had a bunch of vapes...
Last edited:
gunmetalshark
Glass Addict
Showerhead temp. (NOT PID TEMP, i measured with my k-probe inside the holes) is 550-570°F
gunmetalshark
Glass Addict
Better safe than sorry...u wont be dissapointed 
Happy 420 FP peeps!!!!!
Truth's Sister (Jamaican Landrace) showing off her beautiful colors, today's flavor to savor!
Truth's Sister (Jamaican Landrace) showing off her beautiful colors, today's flavor to savor!
Phreman
New Member
Hello Everyone Happy 420!
Very impressed with this forum. Unfortunately, I just found it about two hours ago. And I will have to read the majority of this thread after my purchase. For the past week I have been doing lots of research on vaporizers in general and am now convinced to get a FP. As I am running on a deadline with a good sale today and am hoping to get some insight from this community.
I have both 14mm and 18mm glass that I used to combust with, but other than that, I'll need everything new.
Questions I am struggling to find answers to:
1.) Regarding the shovelheads, is there a combination that lets me use my both my 14mm and 18mm glass with one head or will I need to buy two? Or do I go with the 14/18mm female and get two different male to male adapters, I don't see those on Newvape?
2.) Though I don't want to take part of business away from NewVape, as the company seems great, are there better PID and coils that I should be looking into at similar price points?
Thinking of getting
FlowerPot w/ Showerhead Starter Kit
Flowerpot SiC Wrap-Around Head Set
Extra coil
Screens
This is a really big purchase for me but I think if I get the right rig I will be really happy with it. Being in Canada, I hope to avoid missing something small and needing to order a second shipment.
Thanks to anyone who has the time to help me out before I take the plunge.
Very impressed with this forum. Unfortunately, I just found it about two hours ago. And I will have to read the majority of this thread after my purchase. For the past week I have been doing lots of research on vaporizers in general and am now convinced to get a FP. As I am running on a deadline with a good sale today and am hoping to get some insight from this community.
I have both 14mm and 18mm glass that I used to combust with, but other than that, I'll need everything new.
Questions I am struggling to find answers to:
1.) Regarding the shovelheads, is there a combination that lets me use my both my 14mm and 18mm glass with one head or will I need to buy two? Or do I go with the 14/18mm female and get two different male to male adapters, I don't see those on Newvape?
2.) Though I don't want to take part of business away from NewVape, as the company seems great, are there better PID and coils that I should be looking into at similar price points?
Thinking of getting
FlowerPot w/ Showerhead Starter Kit
Flowerpot SiC Wrap-Around Head Set
Extra coil
Screens
This is a really big purchase for me but I think if I get the right rig I will be really happy with it. Being in Canada, I hope to avoid missing something small and needing to order a second shipment.
Thanks to anyone who has the time to help me out before I take the plunge.
You can get 14mm and 18mm male posts for the pan/shovelhead. You could also get a 18mm to 14mm glass reducer and just use a 14mm bowl in all of your 18-14mm female jointed rigs.
Can't go wrong with a Flowerpot setup, we've been preaching it for months. It's the vape of vapes for sure.
Can't go wrong with a Flowerpot setup, we've been preaching it for months. It's the vape of vapes for sure.
LabPong
Well-Known Member
Ok...check out this banger cup setup.....only bigger all glass screen I have seen....20mm glass disk.
I wonder if that would fit in a stock bowl?
I wonder if that would fit in a stock bowl?
I'd have to check them under a scope, but I hope you are wrong as well considering the caregiver that produced the flowers advertises hand trimmed.
shaolinmilk
Well-Known Member
I'm trying to not break the bank. $700 CAD with shipping for bundle is outside of my budget. Trying to get it closer to $500 CAD with shipping. I'm going to get the showerhead starter kit. What do I need now to also do fans and be able to do a double decker? What else should I add to improve the experience without breaking the bank? Thanks!