Likes2vape
Well-Known Member
Get the wrap around!!
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
The flower bowl is the same size on all of them, the Showerhead has the biggest trough so it can take fat globs too. It is Titanium though, which I guess people act like is gross and unusable today, although I remember just a few years ago here in SoCal when you weren't shit unless you were dabbing off a Highly Educated Ti nail. And that was with a dome.
I was using 100% concentrates before buying my Showerhead. I'm probably using concentrates 5-10% now. Being able to do a flower bowl in one hit changes everything, I think a lot of us got into dabbing because we couldn't find the time for a 10 minute flower session, but with these modern heavy hitters I'm personally finding extracts less relevant at home.
I would consider the D-Nail SiC Halo wrap-around over the smaller TAG dish though if you are a big extract fan.
ParanoidAndroid998
Well-Known Member
@invertedisdead Do you mind sharing how you made your coil handle? Looks like you used para cord or something? I'm looking for a quick and dirty solution till I find something better.
Of course! I just used a shoelace + a small wooden dowel rod for rigidity (I used 1/8" diameter, that's just what was laying around the house)
About as quick and dirty as it gets!
ParanoidAndroid998
Well-Known Member
Thank you! Making one now lol
No issues with wood or shoelace burning?
No issues yet being on for around 16 hours a day. The wooden rod doesn't make any contact with the exposed part of the heater coil and the polyester shoelace makes extremely minimal contact, should be well under combustion temperature, though shoelaces can be made of many materials, so you may want to avoid something like cotton. The knot up front is pretty much the only thing that sees any heat.
Paracord would work, I was even thinking of hemp cord. I just got tired of dropping mine and needed a quick solution, so far everything is still holding up well. I really like the round profile, I feel like it might fit the hand better than the NewVape handle. It would be cool to see NV do a rounded handle with grooves for hemp cord instead of hemp wick, so it's more cushy to hold.
ParanoidAndroid998
Well-Known Member
Problem solved!! Feels great in the hand.
Edit: I have a higher quality coil on the way, so I'll make a better one when I have that.
I'd have to agree with @WAM90 if you use half or more flowers the SH is the way to go, at first. I have both and think each of them are superior extractors in their own right. Wraparound will get the job done on flowers but if you like full bowls you need to stir. Twaxing is best on the wraparound with sapphire halo.
Problem solved!! Feels great in the hand.
Edit: I have a higher quality coil on the way, so I'll make a better one when I have that.
Your SH looks so clean!! Soon it will choose a colorful life of its own
ParanoidAndroid998
Well-Known Member
Hehe I know.. It actually already has a slight golden hue.
Your SH looks so clean!! Soon it will choose a colorful life of its own
I'm excited to see it through its' natural evolution of color
lol
disGRUNTled
Well-Known Member
Flowerpot w/ quartz insert , Golden Lemons watching UFC Fight Night .
Morty
Well-Known Member
Took my SH over to a buddy's party after work last night. Good news...it was a hit! Bad news...when I woke up this morning it was still going...at 1100°F ! And the coil cover is gone ? WTF!!! 
The dab surface is all weird looking. So fuckin pissed right now! 
FUCK!!!!!!!!!!!!!! 
The dab surface is all weird looking. So fuckin pissed right now! FUCK!!!!!!!!!!!!!! 
Justpassedu
Well-Known Member
Glad it was a hit Morty , always is. Good news is enails are pretty tough and reliable so keeping it on should not do any harm. The coils usually go 1st and that takes some time. 1100f is pretty high though , did it color everything up nicely ? What do you mean by the coil cover is gone lol ? Was it stolen while hot or is it just discolored . As for the dish surface just give it a good clean in some iso , maybe a little toothbrush scrub and heat it back up to burn off . Any pics ?Took my SH over to a buddy's party after work last night. Good news...it was a hit! Bad news...when I woke up this morning it was still going...at 1100°F ! And the coil cover is gone ? WTF!!!
Morty
Well-Known Member
Yeah, apparently someone was fucking smoking out of it!
It's just fucking gone. I looked everywhere, but this place is a fucking pigsty.
I'll ISO that shit & post some pics when I get home. Gonna keep searchin for this coil cover. Never taking this shit out again. I need to get a Mighty for situations like this going forward.
NOOOO MORTY 
Morty
Well-Known Member
Yeah, I'm a BIG dumb ass! No secret there!people at parties seldom respect the stuff you care about...rarely turns out well when you are not awake
It still works, but this shit's got my OCD tweakin' like a meth head on a bender
Lesson learned
Last edited:
Justpassedu
Well-Known Member
Heat up and burn off and lots of iso soaking , stop dropping that thing on the carpet man lol you can burn the house down .
Morty
Well-Known Member
He found the cover! It was in the oven ? 
WTF!!! 
All in rec land should count their lucky stars. When was the last time you had to do a keg stand(s) to reup. Gettin' to old for this shit!Fuck it. The gloves are off now. It's broken in! I think this will now become the travel/party vape!
Gonna call it Spicoli. Need to get the Ti SC & get it lookin' all funky fresh to match the rest of it.The fucking oven
Grifo
Well-Known Member
Well after a lot of testing i have decided to stay with the OGFP and the Shower head i realized i could still vape at the same temp i was vaping on my OGFP. i was at 680-750 on the shower head but one day after using my ogfp i plugged in my SH and hit it at 630 with great results. idk why i went so high and didn't think to bring the temps down to what i was using on the original FP.
disGRUNTled
Well-Known Member
KidFated.
Unknown Member
No mention of the brew? I'm disappointed in you bro! 
Likes2vape
Well-Known Member
The FP really is the ultimate party vape!!
Fuck it. The gloves are off now. It's broken in! I think this will now become the travel/party vape!
The fucking oven
There’s really not anything to break with it. The most that could go wrong is a broken bong or drown the controller in beer.
squigger
Well-Known Member
Is this gonna kill me? Honestly fuck high 5. The customer service was good but these aren't built to last. First the enclosed coil fails then the one they send as a replacements wires’s fray. It looks like the rubber got caught up in the newvape handle and then rest of it twisted.
Modnote: Edited to display image
Last edited by a moderator:
LabPong
Well-Known Member
Been lurking this forum for a bit. This vape sounds like what I have been searching for......the best continued taste per load/sesh.
I have just a couple questions I could not quite answer reading through many pages here.
How is it with cleaning or gunking up with using flower or flower kief mix?
How efficient can it be with flower?
I have just a couple questions I could not quite answer reading through many pages here.
How is it with cleaning or gunking up with using flower or flower kief mix?
How efficient can it be with flower?