Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
An insert would be much better than a basket screen in the airpath. An insert keeping the herb at the same level its already at so theres no need for adjustments and that locks in place with the current groove system.
In other news... I am warming very much (pun not intentional) to dabbing THROUGH the hole in a pre-heated Showercap.
I can load a bowl of flower, and a bowl of convection dab, not bother touching the cap at all, just the SH handle. Not even bothering to change temps either.
Isnt this essentially how the sublimator worked?
This insert could be called 'the micro-hit heat funnel' or the 'the micro-hit Ti bowl insert'.
Its an insert holding a floating bowl.
Its a Floater
Vapetologist
HamsterDAMAGED
Simple. Fast. Devastating. The double layer ti screen is awesome; that adjustabowl just don't stick at all. All hail the ShowerHead!
Likes2vape
Well-Known Member
I was thinking how to make the wrap around head have a more distributed air path like the showerhead vs the 5 holes straight down the center. If @NewVape710 made a 3 piece design where the wrap around head with the 5 air holes screw into a center piece which had air holes like the showerhead and than screw into showerhead nut would be pretty awesome!!
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
I've been asking Edwyn about the possibility of a Titanuim bowl sleeve to restrict bowl diameter and "herd" the herb to the warmer center of the screen.
Hoping it eventually happens...
I just tried the ELB cap method and it worked extremely well. Much better for my smaller hits for sure. It milked up much quicker and thus allowed for dense, chewy, tasty vapor. I tried the hand torn nug grind and found the flavor to be absolutely amazing. I'm not sure if it was so tasty due to the fact that it's a new strain for me known for great flavor (Tangie), or due to the lack of grinding. More research is necessary, but the citrus flavor just tickled the taste buds in the back of my tongue in an unexpected punch of flavor. Delicious.
I think the ELB cap will be my preferred method going forward (unless a microbowl setup gets created). Thanks for the suggestion @emmdeemo.
Cover me fellas, I'm goin' back in for some more of that hand-shredded Tangie.
I think the ELB cap will be my preferred method going forward (unless a microbowl setup gets created). Thanks for the suggestion @emmdeemo.
Cover me fellas, I'm goin' back in for some more of that hand-shredded Tangie.
I get it I think. Great solution.
You mean like an insert that just essentially makes the bowl wall thicker?
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
EDIT: Although, Im not a fan of fiddly hot things that fall out
Thats why I wanted the locking screen in the first place. Hmm. Mulling...
Last edited:
Vapetologist
HamsterDAMAGED
Does this concentrate the vapor in a way that loading just the same amount in a FP body can't?Yeah, the Evo ELB cap fits good.
In other news, I've been messing around with using my Vapocane glass bowl. I had to crank up the temps about 100°F to compensate for the lower load, but it works amazingly well. The flavor seems better to me this way and as a bonus I can lift out the bowl to clear the hit.
Depends on all ya other factors, temp, cap etc. It concentrates the airflow tho, yeah. Personally, I abandoned it for permacapping and using the double weave Ti screen instead.
Vapetologist
HamsterDAMAGED
I love the free flowing nature of the ShowerHead, and only add the 'Cap towards the end, do you have any issues with the restricted draw?
Its draw restriction is def there, and I usually hate draw restriction, but its acceptable for me at least on the SH with the original Showercap. I'm able to reduce temps and get more constant air temps going thru the bowl. My lungs are approving. YMMV.
disGRUNTled
Well-Known Member
Jet Fuel & Rangers hockey ......
Vapetologist
HamsterDAMAGED
With live resin at that high of %, how much do you need to do? Like...tiny amounts or do you just rage that shat?Jet Fuel & Rangers hockey ......
I only sometimes use that cap at the beginning to get the vapor flowing and then remove the cap to finish up restriction free. I could never give up the easy free flow of vapor an uncapped shower head gives.
I love it too much.
This is why I'm now considering an adjustable carb cap, so I can experiment to satisfy my wonderings if theres a crossover point of more air thru the cap but still getting the preheat and air temp constancy.
You mean? -
Last edited:
Vapetologist
HamsterDAMAGED
Nahhh... more like...Rage that shit
dontmindme
Active Member
Another idea is that newvape makes its own health stone in the center of the shower cap. I can only imagine the air flow dragging the dab down to make up for any restrictive air flow. Hey... or make a cone shape bowl for abv and put the dab there instead. Carb capping would only be a ring and use the abv + dab as the primary path... it also filter air to a extent.
It'd be tricky to find the balance though... ultimately fine tuning distance of the heating element and the material.
Example: the evo transfers heat multiple times at different distances... without the restriction of the basket the preferred setting of the user changes.
So... after that thinking of that... the carb cap would no longer be a ring but a hollow cone pointed up. I was thinking originally if newvape just made multiple slots and a ring that controls air flow to heat retainment to stable temps. Where am i? I think too much pulling the disgruntled... dude always getting tipsy.
So the compensation of heat is spun like a gear, fluctuating air flow to melting a dab and... flow. You really cant do both at once unless you control the incoming air.
I guess depending how much you want to spend on r&d... it'd be abv compressed on a spikey glass or quartz tapered insert with air paths. So when the dab is drawn down it touches the general consensus of material you should use... almost like micro percolating.
You really take my name to heart... or maybe im invincible. Yea... i talk to myself.
This all reminds me of terpene extraction when used at low temps... is it better before or after and at frequency is it you cant tell the shuffle? I remember listening to how cbd can get stuck or complicates with metabolism. Is terps a thinner? And back to a series of heating. Seems like both sides of summer. Kinda like a sprout and the flower.
It'd be tricky to find the balance though... ultimately fine tuning distance of the heating element and the material.
Example: the evo transfers heat multiple times at different distances... without the restriction of the basket the preferred setting of the user changes.
So... after that thinking of that... the carb cap would no longer be a ring but a hollow cone pointed up. I was thinking originally if newvape just made multiple slots and a ring that controls air flow to heat retainment to stable temps. Where am i? I think too much pulling the disgruntled... dude always getting tipsy.
So the compensation of heat is spun like a gear, fluctuating air flow to melting a dab and... flow. You really cant do both at once unless you control the incoming air.
I guess depending how much you want to spend on r&d... it'd be abv compressed on a spikey glass or quartz tapered insert with air paths. So when the dab is drawn down it touches the general consensus of material you should use... almost like micro percolating.
You really take my name to heart... or maybe im invincible. Yea... i talk to myself.
This all reminds me of terpene extraction when used at low temps... is it better before or after and at frequency is it you cant tell the shuffle? I remember listening to how cbd can get stuck or complicates with metabolism. Is terps a thinner? And back to a series of heating. Seems like both sides of summer. Kinda like a sprout and the flower.
Last edited:
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
Vapologist,
I actually have that water pipe... but that's not me!
Seriously, though, it was an inexpensive ($45) 3-foot floor bong on closeout, so I wasn't expecting much from it. I ended up lovin' it though... it's one SERIOUSLY fun piece to whip out when visitors want a toke!
I actually have that water pipe... but that's not me!
Seriously, though, it was an inexpensive ($45) 3-foot floor bong on closeout, so I wasn't expecting much from it. I ended up lovin' it though... it's one SERIOUSLY fun piece to whip out when visitors want a toke!
Vapetologist
HamsterDAMAGED
I'd love to have that in the collection!
dontmindme
Active Member
Churning of the clock.
@Stu inspired me to look at some of my glass bowls built for flower and tried resting the SH above it and got some really sweet tokes. Nothing fits well and they all have restricted airflow. It's kinda like a reverse carb cap. That definitely gave me a preview of what to expect flavor wise once the glass FP's arrive. I didn't find it overly different from the Ti FP itself. I was just vaping some fine grind, haven't tried a solid nug yet. That's next 
Been micro dab/flower double deckers at 620F on the SH.
Been micro dab/flower double deckers at 620F on the SH.
Been joining you this evening with the DD's but a fairly filled bowl, and dabbing thru the SC hole, at 570 That and watching the latest Red Dwarf episode
Endless honeymoon continues.