Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Bad Dog

Yeah I pissed on the rug...... so what
I'm debating what to do with my stimulus checks.. I'm conflicted between a Volcano Hybrid and I think the B2 head.
you actually might be able to get both!?! if you have a Vrod all you need is the bottom half of the head to convert, if you email cannabis hardware the can probably just sell you that for cheaper then buying a whole new head. then you just need some pearls to go with it. things like the baller nut are not mandatory but add a layer of safety, but without the nut the old carb caps still work I think so getting either of the current carb caps is not necessary unless you want the nut.
 

Planck

believes in Dog
@Bad Dog I talk to Dog, he tells me things. :cheers:

The Flower power is calling me so I've been spending some time on the site. I really like how all the parts are listed for sale and love the interchangeable design.

I've read the entire thread and still struggling with which head to get. :\
Flower only so probably the B1 or WeedEater, further torture is required to forge a final decision. All the while knowing full well that there is no bad choice, sometimes I hate me. :rofl:
 

Stonedbadger

Well-Known Member
Hey people! So I have the old Flowerpot showerhead, will the B2 or B1 attachments work?? ie will they just screw onto my existing set up?

Also any chance of a nice black Friday deal??

Cheers!!
 
Stonedbadger,

rosedale

Well-Known Member
Is it correct to say that most people are going with the 3mm rubies in the B1? I know @VGOODIEZ has borosilicate beads and I read about sapphire somewhere. I would love to hear some opinions and why.
 
rosedale,
  • Like
Reactions: VGOODIEZ

Texus

Well-Known Member
Is it correct to say that most people are going with the 3mm rubies in the B1? I know @VGOODIEZ has borosilicate beads and I read about sapphire somewhere. I would love to hear some opinions and why.
Some of that will come down to your airflow preferences. 3mm rubies on the original V-rod Baller (holes instead of screen) was too restrictive for my taste. So switched to 4mm which helped. But the biggie was switching to the screen Baller (B-2). Now I have airflow that I love. Huge milky hits, no need to pull shovel head out to easily clear the chamber. So I'll probably revisit my 3mm balls eventually to see where that lands.

For folks deciding between B1 and B2 who do not do concentrates, the advantage I'd see for the B-2 might be the added mass of the thick washer that someone posted a link to a few pages back, in place of the dab dish. An added heat sink. But cannot say how the benefits of that may weigh against airflow or other design features of the Weedeater that may continue to make it the best choice for flower.
 

The Stray Fox

Separated from the group
@Socks And Sandals It’s hard to keep up, I hope you’ve been well. The B-1 with 3mm rubies will be your ticket if you just want a unit for flower. The slow draw is not necessary with the B-1. It can handle a much faster draw than the WE and VRod. I feel the vapor from any CH unit is going to be more satisfying than any S&B unit. I’d definitely bypass the Volcano route and go the CH direction. The carb cab was updated to except the Baller Nut on the B-1 or VRod. The Baller Cap is very nice but definitely not necessary for the B-1. Good luck bud, I hope this helps.
 

David Root

Well-Known Member
Finally weighed out .5 g and went through a whole bowl with the WeedEater.

Learning as I go, but All dry herb vaping, the first draw is the best.

SO, next time around, I put .07g in and wasted it in one hit @ 760 *f.
Then another
Then another
Did not dump it out between
I stirred after 3 .07g bowls. Looked like nothing left.
They are all the first draw. Mmmm

David

Black Friday sale? B1 here I come!
 
David Root,

bizwaxzion

Enigmatic Cannabist
And the B2 head is ok to screw onto my old coil I have for the showerhead??
Maybe - the showerhead and weedeater heads can work with many 20mm coils, but the underside of the vrod head is milled to accept a specific coil format as shown below. If you enjoy flower only - take a look at the B1 head which should be good with your existing showerhead coil.
vrod_20mm_coil_1_2_3_740x.jpg
 

Stonedbadger

Well-Known Member
Maybe - the showerhead and weedeater heads can work with many 20mm coils, but the underside of the vrod head is milled to accept a specific coil format as shown below. If you enjoy flower only - take a look at the B1 head which should be good with your existing showerhead coil.
vrod_20mm_coil_1_2_3_740x.jpg
Brilliant, thanks. Looks like it will work! Now just need a wee win...
 
Stonedbadger,

SquirrelMaster

Well-Known Member
There's a banner on CH's site announcing the Black Friday sale. Nov. 26 , 12am EST - 11:59pm with coupon code BLACKFRIDAY. Same time frame as previous years.

I'm debating between upgrading my VROD to a B2
+ sapphire dish, ruby balls, deuce cap

and/or getting a full B1 setup...or nothing lol. I love my VROD as is so I don't really feel the NEED to upgrade but I like Cannabis Hardware and their willingness to listen to the community and that makes me want to keep supporting them. Also VAS lol.

The B-1 interests me because of the less restrictive airflow. It doesn't seem right to leave my VROD as-is if I grab a B-1 which is why I was thinking of converting. Go big or go home I guess?

When I look back to my VROD purchase I choose it over the Weedeater because of the larger heat mass. I rarely used concentrates until I bought the VROD but now I do a double decker at least 2 times a week so either the VROD or B-2 would need to stick around and the B-1 would be for something different. Decisions, decisions.
 

delta hotel

Well-Known Member
I'm almost all flower and I originally grabbed the VROD, upgraded to the B-2, wanna see if I can get the B-1 top for Black Friday since I already have the screened bottom. I don't see just the top listed anymore though, I'll email them Friday and find out.

On Christmas Eve I waited up until midnight to get it on the discount code for my original order, I had just found FC, and y'all have cost me a lot of money since then! I can't stay up late this time, so I hope I can get in on it.
 

Chicken No Name

Dazed and confused
There's a banner on CH's site announcing the Black Friday sale. Nov. 26 , 12am EST - 11:59pm with coupon code BLACKFRIDAY. Same time frame as previous years.

I'm debating between upgrading my VROD to a B2
+ sapphire dish, ruby balls, deuce cap

and/or getting a full B1 setup...or nothing lol. I love my VROD as is so I don't really feel the NEED to upgrade but I like Cannabis Hardware and their willingness to listen to the community and that makes me want to keep supporting them. Also VAS lol.

The B-1 interests me because of the less restrictive airflow. It doesn't seem right to leave my VROD as-is if I grab a B-1 which is why I was thinking of converting. Go big or go home I guess?

When I look back to my VROD purchase I choose it over the Weedeater because of the larger heat mass. I rarely used concentrates until I bought the VROD but now I do a double decker at least 2 times a week so either the VROD or B-2 would need to stick around and the B-1 would be for something different. Decisions, decisions.
I really liked my vrod B2 set up. I did think it an improvement to standard vrod. and I was happy with the screen and no baller nut. No need for another carb cap.

Tbh if I didn't have a dcup to use concentrate on I would have stuck with it. It's a brilliant vape.

But as I have a dcup I went b1 and sold my vrod. I think the b1 is another slight improvement for me.

Maybe go B2 for now.....?
 
Top Bottom