caboose0013
New Member
Seed of Life Sherlock Bub
Flowerpot Vrod 666°F
Flowerpot Vrod 666°F
Nice. I like your style. I’ve had great results from setups similar to yours. My favorite glass bowls for my FlowerPots are one-offs I’ve taken the time to figure out the recipe.It is a 14mm glass adapter for the Mighty/Crafty that I had laying around
Here is a Mighty capsule alternative that doesn’t touch the FlowerPot head. I’ve messed with this a lot. You do have to hold head to the “bowl” but it reminds me of using a lighter. The best version I’ve found is an 18mm male to 14mm female extension adapter but any 14mm female joint should work. I put a custom cut screen in the capsule for added cleanliness.I don't use it with the capsules because I don't like the idea of the titanium touching the aluminum caps while heating
took a while to get round to it but I finally took the pid apart and and sure enough it was a loose connection.thank you for help! you have saved me over 100 hundred English pounds.thanks to anyone else who might have replied and I've not gotten back to,I struggle to navigate forums for some reason.thanks again!Hi, not working Flowerpot = no good, i feel with you!
So what is the behavior of your PID? Completely dead? And did you open it up and check for loose Connections? My PID failed too, i was quite desperate and after some Tips here @newvape918 or @NewVape710 posted a link to a Youtube Video how to open the PID and check it. It s pretty easy and after a few minutes my Flowerpot worked like new.
Worth a shot, i keep my fingers crossed for you
Oh, and BTW: any tips where to get a spare PID and coil in the EU??? I would buy it immediately just for peace of mind...
And a shot in the dark: I want to buy an original Möbius stereo Matrix, new or used, EU...
Have a great day!
Edit: Here is the Video:
agreed but it's hard work pulling on carb capped load especially using a water tool that has drag as well.Using the carb cap for flower hits is so much better than un-carbed, for the VROD at least. It's just too airy with no cap, and you get the ring due to more air flow from the outer edge of the dish. I hadn't tried an un-carbed flower hit in a looong time and just gave it a shot. Sure it tastes slightttttly better but that's because it's mixing with the air. I prefer fuller extraction which still tastes great.
Carb cap offers thicker vape, fuller extraction, and leaves no ring.
So you're using a SH as a carb cap for your VRod? Neat.My first and DIY Vodka bottle bong
It’s been with me, since we drunk it with a friend, in a big Screwdriver pitcher, in 2009, smoking joints, and carefully drilling it. I still can’t believe we didn’t broke it that day, and how it had survived several “home” moves 11 years so far!!!
It’s one of the smoothest rigs I own.
1L volume.
3 holes x 4 lines upgrid stem perc.
It “fizz-purrs”.
It needs priming, and a second draw.
Flavor clouds
Stay vaped!
Mantente de la mente!
WeedEater between 666-686F, and very carefully placing an inverted heated 565F ShowerHead on top. Both are ON of courseSo you're using a SH as a carb cap for your VRod? Neat.
Is the SH cold or heated?
I do have a quick question; how did you all get yours to turn blue/purple? Mine is turning that color on the inside around where the coil goes and the body itself is definitely a darker color than when I first purchased it. Do I need to turn it up quite a bit and let it sit for a few days?
I do have a quick question; how did you all get yours to turn blue/purple? Mine is turning that color on the inside around where the coil goes and the body itself is definitely a darker color than when I first purchased it. Do I need to turn it up quite a bit and let it sit for a few days?
I'm curious about this myself!
I believe I’ve had the OG VROD since early 2018, and SH since early 2019 too.That is gorgeous! I only keep in on for an hour or two each night, so I'm guessing it'll take a year or more for the color to change. Kinda like the long-game on this one though, feel confident it'll last for years / life.
God knows I’ve tried to keep up with my fellow FlowerPoters but no go for me either. It hurts/irritates my throat Easy fix. Like you I just turn down the temp, my Vrod is set to 575, and I take smaller hits. I get faster extraction by placing an 18mm basket screen upside down in the Ti bowl and then placing the double weave screen on top of the basket screen. All I’m doing is placing the herbs closer to the head to extract faster at lower temps. My throat appreciates it. There is still thick vapor and big hits just with less heat gusting towards my throat........at least that’s what I’ve concluded. On average .05g gives me 3 really decent hits with a natural draw. I’m glad you’re enjoying your FlowePot. I love how everyone enjoys it differently.I applaud those of you that are able to finish entire bowls in a few hits; seems like it would be quite a bit more taxing on the lungs for me.
I have both the NV 2 piece and the BCG (all 3 plates). I find that I can only achieve a dust like grind with the 2 piece New Vape and Volcano grinders. You can really mash it together in a 2 pieces whereas the traditional style is limited by hole size. Then again, I have no idea what I'm talking about...I just love the ritual of experimenting with all the variables.
The old glass bowl w/ handle is the one that has the screen issues when debowling.
I wish the ZC_Glass bowl had a handle, but it doesn't have the screen issues. And the mid section doesn't get hot at all in my experience. It's the far superior of the two options despite having no handle.
And 3rd party options are all that exist. NV doesn't do glass.
Edit: if anyone is interested in the old glass bowl (14mm) feel free to pm me lol I used it twice and then put it away because of the screen falling out when debowling.
Using the carb cap for flower hits is so much better than un-carbed, for the VROD at least. It's just too airy with no cap, and you get the ring due to more air flow from the outer edge of the dish. I hadn't tried an un-carbed flower hit in a looong time and just gave it a shot. Sure it tastes slightttttly better but that's because it's mixing with the air. I prefer fuller extraction which still tastes great.
Carb cap offers thicker vape, fuller extraction, and leaves no ring.
Room for another? .. not had long with this baby.. but loving everything about her. Thank you NewVape
Temp cycles continuously from 580-650F, 580-610F is working nicely for a bowl heat soak. Then cycling up to 650F and back down (takes ~20-25secs,) plenty of time to milk that glass & jeez does it! Set up to kill off a bowl in a hit, digging .03-.05g ..
I find the draw beautiful, I love the Z for its cool & airy monster hits.. This is even less resistive, its like taking a slow deep breathe, litreally just open your mouth, slow.
Have also set it up on a wireless controlled outlet, saw someone recommend this somewhere in this megathread.. nice touch for peace of mind. Went with Tapo, has countdown on/off timers- handy for 10min preheating.
Super cool station!