Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
crownroyaldaddy
Well-Known Member
So just some initial impressions after ive spent the morning with my new flowerpot...note that i am also relatively inexperienced with water. I was initially going to be wordy but ill simplify my post.
-Nicely packaged, bundle case and all FP parts feel great. They even sent me an extra doubleweave screen(ordered 2, received 3). Not sure if it was intentional but im happy lol.
-I did still have some grease/oil on some pieces as well as some minor scratches and scuffs which was disappointing but i cleaned everything and was on my way.
-This thing is easier to use than it looked when i first started looking early this year. Easy to set up and use and get big rips! Very efficient with flower with good taste.
-My glass was dirty after like 2 hits. Is this normal? I got the better screens to try to minimize cleaning. If not normal, what could cause this?
Feeling like this thing is gonna complement my Volcano and Mighty very well.
-Nicely packaged, bundle case and all FP parts feel great. They even sent me an extra doubleweave screen(ordered 2, received 3). Not sure if it was intentional but im happy lol.
-I did still have some grease/oil on some pieces as well as some minor scratches and scuffs which was disappointing but i cleaned everything and was on my way.
-This thing is easier to use than it looked when i first started looking early this year. Easy to set up and use and get big rips! Very efficient with flower with good taste.
-My glass was dirty after like 2 hits. Is this normal? I got the better screens to try to minimize cleaning. If not normal, what could cause this?
Feeling like this thing is gonna complement my Volcano and Mighty very well.
timeisforchange
Member
I'm another excited soon-to-be owner of a new 2-hole Vrod carb cap with 2 5mm spinners to go with, so I'll be able to give a review/comparison of the single hole (no angle) cap vs. what I think will end up being a sweet vortex dab 
I think it's interesting you're saying you get flower bits in your glass piece after 2 hits, how big are they? I'm assuming you're using a grinder? Would you say you draw quickly or a medium speed? I get a small buildup spot directly under the flower pot after a week but that's me, once cleaned it takes far more than 2 hits before I start seeing specks of flower. For me I'd say at least a day or two before I start seeing something, but I also refuse to vape flower that isn't at least 61% humid. I've noticed if I compromise and vape much drier flower it will brown much faster under 600f, and I start seeing lots of bits. (Just my experience)
For cleanup, each week the flower pot goes through anywhere between 7-14g of flower and about 1-1.5g or so of concentrate, so after taking it apart I'll drop the parts into a $30 Magnasonic jewel cleaner using just water after letting the parts soak in iso for 2-3 mins first to loosen. You'd be amazed how much comes off the screen, absolutely everything! With no scrubbing, so no damage to the screen. If there's buildup left after a couple 480 second cycles, I let the screen soak in the iso for 1 min and then back into the cleaner. Usually I don't need to do any more than 5-6 total cycles to clean the screen, dry and use.
With my TAG piece, I use a grill glove to hold the piece so I don't burn myself and rinse with boiled water from a tea pot. Takes one kettle and comes out completely new with no scent whatsoever, stick it in the fridge to cool it for quick reuse. I choose to go dry in my glass piece, mainly because I don't want water cooling anything down and creating more reclaim. I have zero breathing issues from going dry and in fact think if anyone wants a more intense experience, they need to at least try it with the temp at 600-625, medium draw speeds and if the flower is in the correct humidity range it gives complete extraction with thick no cough clouds. The performance of this system is simply put: medically next level, there's no question in my mind!
Have a safe holiday season all!
I think it's interesting you're saying you get flower bits in your glass piece after 2 hits, how big are they? I'm assuming you're using a grinder? Would you say you draw quickly or a medium speed? I get a small buildup spot directly under the flower pot after a week but that's me, once cleaned it takes far more than 2 hits before I start seeing specks of flower. For me I'd say at least a day or two before I start seeing something, but I also refuse to vape flower that isn't at least 61% humid. I've noticed if I compromise and vape much drier flower it will brown much faster under 600f, and I start seeing lots of bits. (Just my experience)
For cleanup, each week the flower pot goes through anywhere between 7-14g of flower and about 1-1.5g or so of concentrate, so after taking it apart I'll drop the parts into a $30 Magnasonic jewel cleaner using just water after letting the parts soak in iso for 2-3 mins first to loosen. You'd be amazed how much comes off the screen, absolutely everything! With no scrubbing, so no damage to the screen. If there's buildup left after a couple 480 second cycles, I let the screen soak in the iso for 1 min and then back into the cleaner. Usually I don't need to do any more than 5-6 total cycles to clean the screen, dry and use.
With my TAG piece, I use a grill glove to hold the piece so I don't burn myself and rinse with boiled water from a tea pot. Takes one kettle and comes out completely new with no scent whatsoever, stick it in the fridge to cool it for quick reuse. I choose to go dry in my glass piece, mainly because I don't want water cooling anything down and creating more reclaim. I have zero breathing issues from going dry and in fact think if anyone wants a more intense experience, they need to at least try it with the temp at 600-625, medium draw speeds and if the flower is in the correct humidity range it gives complete extraction with thick no cough clouds. The performance of this system is simply put: medically next level, there's no question in my mind!
Have a safe holiday season all!
steama
Well-Known Member
Three shiny beads went air-born! Gone with an unmindful flip of the wrist. I thought to myself that I could look for them, I mean how hard could it be? Thirty minutes later I realized this was more difficult than I thought and now far beyond their six dollar value. Turned off the room lights, grabbed a dim flashlight, and began searching on my belly, like a snake, or a worm, it was me or the beads at this point. Thirty minutes later about to give up, the flashlight beam brush the sole of a shoe and between the sole and the carpet were two slightly amber transparent beads, only one more 5mm ghost left to find. As I was getting off my belly I noticed a glimmer and found the third bead under the edge of a coffee saucer on the desk. Go figure, I found that third bead the last place I looked.
Moral of the story, don't forget the beads when baked like a potato(e) <-- In remembrance of Dan Quayle.
Moral of the story, don't forget the beads when baked like a potato(e) <-- In remembrance of Dan Quayle.
Three shiny beads went air-born! Gone with an unmindful flip of the wrist. I thought to myself that I could look for them, I mean how hard could it be? Thirty minutes later I realized this was more difficult than I thought and now far beyond their six dollar value. Turned off the room lights, grabbed a dim flashlight, and began searching on my belly, like a snake, or a worm, it was me or the beads at this point. Thirty minutes later about to give up, the flashlight beam brush the sole of a shoe and between the sole and the carpet were two slightly amber transparent beads, only one more 5mm ghost left to find. As I was getting off my belly I noticed a glimmer and found the third bead under the edge of a coffee saucer on the desk. Go figure, I found that third bead the last place I looked.
Moral of the story, don't forget the beads when baked like a potato(e) <-- In remembrance of Dan Quayle.
I've read similar posts where others have mentioned almost losing their balls.
I wonder if there is someway that NewVape could make some type of ring that goes over the oven the balls to keep them inside a tunnel (for lack of a better word). That way, even if you forgot and lifted the cap off, the balls can't get out until you lift the metal ring too. I hope I explained my idea in a way that it's comprehensible. 
steama
Well-Known Member
that's a cool ideaI've read similar posts where others have mentioned almost losing their balls.
Hogni
Honi soit qui mal y pense
App. 0.5g max. But would be too near to the heater and you have to expect charring. But why do you want to fill the bowl with such a big load? If you are only a little bit in flavors you wouldn't do so - never! Just fill it with 0.1 - 0.2 take some big rips and refill it if you should need/want some more after that.
Volume of the 18 herb bowl is the same as that of the 14 btw.
Volume of the 18 herb bowl is the same as that of the 14 btw.
Last edited:
SonSzu
Member
Thanks.
Sometimes I'd rather just take 4-6 hits of one bowl. As opposed to 1-2 hits of more smaller bowls, constantly packing and repacking.
What do you mean?
pxl_jockey
Just a dude
I just wanted to say Thank You to Team @NewVape710 @newvape918 and CS Queen Lori for the great communication since I placed my order, especially considering it’s one of their busiest times. My situation is uncommon and they’ve gone above and beyond for me. And Lori has been the kind & friendly voice for NewVape in every instance of stupid questions and forgotten detail. Definitely earned a gold star!
So yeah, I’m a happy NewVape camper!
So yeah, I’m a happy NewVape camper!
@pxl_jockey Welcome to the NewVape clan!
YaMon
Vaping since 2010
A half to a gram at a time? imho, that's excessive for this vape. I am not doing dabs and never need to clean the ShowerHead itself. The adjustabowl I clear out using the debowler and then brush out as soon as I kill it while it is still hot. (I am using double weave screens). I've not had a problem with restriction or flavor doing this. I've had my FlowerPot since January and use it daily. I've soaked my bowl in ISO once in that time frame and it came out squeaky clean. I will recommend you consider a second bowl, believe it or not you may not finish a bowl of Indica and want a Sativa the following day. Having that second bowl saves you from dumping a partially spent load.
Edit: Hell the more I think about it with multiple strains sitting here I can see myself buying a 3rd or 4th bowl.. just need a stand to hold that @NewVape710
Vaporware
Well-Known Member
You probably don’t need anywhere near 1g to melt your face off with the FP. I think NewVape say it holds up to 0.3g, although you could probably fit more if you tried.
If I turn up the heat I can melt my face off with far less than that, and if I turn the heat down I can get quite a few draws out of it. I usually like setting it somewhere in the middle right now though.
If I remember correctly, some of the old bowls may have been deeper so they’d hold more, but they wouldn’t work quite as well for small loads because the small loads wouldn’t be as close to the heater.
I can’t remember anyone who’s actually spent time with the FlowerPot and still thought it needed a larger bowl though, except for the people who wanted it to keep going without reloading for parties.
If you have access to concentrates or you can make your own (Rosin seems fairly easy), you can do that at the same time (on the dish or in the flower) and I’d be very surprised if the combination didn’t hit as hard as you wanted.
Hogni
Honi soit qui mal y pense
I just wanted to say Thank You to Team @NewVape710 @newvape918 and CS Queen Lori for the great communication since I placed my order, especially considering it’s one of their busiest times. My situation is uncommon and they’ve gone above and beyond for me. And Lori has been the kind & friendly voice for NewVape in every instance of stupid questions and forgotten detail. Definitely earned a gold star!
So yeah, I’m a happy NewVape camper!
Such is life. Some have a great communication some absolutely none since nearly 2 weeks. Time for ending the patience I guess.
YaMon
Vaping since 2010
Where's the "unlike" vote when you need one. Take care.Flower pot boxed and stored.
Wifey gave me the boot so I will be surviving with my omni XL for the foreseeable future.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Buenas noches FC, FCers
@NewVape710 @newvape918 thanks for everything, much appreciated.
Today I received a surprise, NV package VAS arrived.
Beautiful stuff indeed.
Top view of the bounty.
Cannagar is blunt and robust, heavy duty stuff, years of rolling for sure.
La Belleza de La Coleccion, the weight, the smooth grinding action, the color, the fine grind, the smell, the coldness in your hand. Need to have it to know it.
VROD newest version, 2 holed new revision VROD angled carb cap, female 14 post to use on Felazi recycler.
10 quartz 5mm balls, they spin like crazy in NV SiC dish. Beautiful enchanting sound. This is for display only, I'm currently using 4 with great success.
ShowerHead , 14 and 18 mm glass bowls, loading tool, double weave Ti screen, extra enail handle for when I order the nail and PID I forgot.... jajajajajajajaja
This Felazi BooM recycler, is going to be my daily driver dab setup from now on, waiting on NV to get me a female 14mm glass bowl.
Stay vaped nice people.
@NewVape710 @newvape918 thanks for everything, much appreciated.
Today I received a surprise, NV package VAS arrived.
Beautiful stuff indeed.
Top view of the bounty.
Cannagar is blunt and robust, heavy duty stuff, years of rolling for sure.
La Belleza de La Coleccion, the weight, the smooth grinding action, the color, the fine grind, the smell, the coldness in your hand. Need to have it to know it.
VROD newest version, 2 holed new revision VROD angled carb cap, female 14 post to use on Felazi recycler.
10 quartz 5mm balls, they spin like crazy in NV SiC dish. Beautiful enchanting sound. This is for display only, I'm currently using 4 with great success.
ShowerHead , 14 and 18 mm glass bowls, loading tool, double weave Ti screen, extra enail handle for when I order the nail and PID I forgot.... jajajajajajajaja
This Felazi BooM recycler, is going to be my daily driver dab setup from now on, waiting on NV to get me a female 14mm glass bowl.
Stay vaped nice people.
Last edited:
Buenas noches FC, FCers
@NewVape710 @newvape918 thanks for everything, much appreciated.
Today I received a surprise, NV package VAS arrived.
Beautiful stuff indeed.
Top view of the bounty.
Cannagar is blunt and robust, heavy duty stuff, years of rolling for sure.
La Belleza de La Coleccion, the weight, the smooth grinding action, the color, the fine grind, the smell, the coldness in your hand. Need to have it to know it.
VROD newest version, 2 holed new revision VROD angled carb cap, female 14 post to use on Felazi recycler.
10 quartz 5mm balls, they spin like crazy in NV SiC dish. Beautiful enchanting sound. This is for display only, I'm currently using 4 with great success.
ShoweHead , 14 and 18 mm glass bowls, loading tool, double weave Ti screen, extra enail handle for when I order the nail and PID I forgot.... jajajajajajajaja
This Felazi BooM recycler, is going to be my daily driver dab setup from now on, waiting on NV to get me a female 14mm glass bowl.
Stay vaped nice people.
ABSOLUTELY GORGEOUS!!! 
zor
Well-Known Member
Beautiful pics! I don't recognize that dogbone thing, is it a stand?
I'd like to get a better stand for my vrod as the showerhead one is too small and it gets stuck, I've come to use the debowler which works great but has some stability issues. Where did you get the quartz beads? I must have been dreaming that newvape sells them as I swore seeing some listed but now I can't find anything.
I'm one of the only (if not the only) people who can't distinguish a significant taste difference between vrod and showerhead for flower, concentrates, twaxing....they both taste immensely flavorful when I lock in the proper temps. Ignorance is bliss!
I'd like to get a better stand for my vrod as the showerhead one is too small and it gets stuck, I've come to use the debowler which works great but has some stability issues. Where did you get the quartz beads? I must have been dreaming that newvape sells them as I swore seeing some listed but now I can't find anything.
I'm one of the only (if not the only) people who can't distinguish a significant taste difference between vrod and showerhead for flower, concentrates, twaxing....they both taste immensely flavorful when I lock in the proper temps. Ignorance is bliss!
Baron23
Well-Known Member
Really ? Oh shit. Sorry.Flower pot boxed and stored.
Wifey gave me the boot so I will be surviving with my omni XL for the foreseeable future.
Someones having a great holiday season!
Enjoy!
Enjoy!
Buenas noches FC, FCers
@NewVape710 @newvape918 thanks for everything, much appreciated.
Today I received a surprise, NV package VAS arrived.
Beautiful stuff indeed.
Top view of the bounty.
Cannagar is blunt and robust, heavy duty stuff, years of rolling for sure.
La Belleza de La Coleccion, the weight, the smooth grinding action, the color, the fine grind, the smell, the coldness in your hand. Need to have it to know it.
VROD newest version, 2 holed new revision VROD angled carb cap, female 14 post to use on Felazi recycler.
10 quartz 5mm balls, they spin like crazy in NV SiC dish. Beautiful enchanting sound. This is for display only, I'm currently using 4 with great success.
ShowerHead , 14 and 18 mm glass bowls, loading tool, double weave Ti screen, extra enail handle for when I order the nail and PID I forgot.... jajajajajajajaja
This Felazi BooM recycler, is going to be my daily driver dab setup from now on, waiting on NV to get me a female 14mm glass bowl.
Stay vaped nice people.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Hola @newvape918
I wrote Lori some emails, probably you guys are too busy.
Need to order more stuff that I forgot in last VAS shopping.
Thanks in advance.
Best,
Z.C.
Stay vaped....
crownroyaldaddy
Well-Known Member
Maybe I need a T break. I havent really been getting the effects I was hoping for from my FP so far. I feel like my Volcano and Mighty both give more noticeable effects with the same material.
Ive been experimenting with temps from 600-725. Ive varied the amount I put into the bowl. Everything is ground finely with the newvape grinder. Letting the coil sit for at least 10 mins heated up. Its hitting well and getting plenty of vapor but im just not getting my face melted off.
Not down on my purchase at all yet, just want to unleash its full power that I know is there. Off to experiment more!
Ive been experimenting with temps from 600-725. Ive varied the amount I put into the bowl. Everything is ground finely with the newvape grinder. Letting the coil sit for at least 10 mins heated up. Its hitting well and getting plenty of vapor but im just not getting my face melted off.
Not down on my purchase at all yet, just want to unleash its full power that I know is there. Off to experiment more!