Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

[psychonaut]

If you tighten the nut when warm, do you have to worry about any potential cracking of the dish when it cools?

Not sure if enough contraction occurs when cooling that it would be an issue.

I'm referring to the coil nut pairing to the center post. The dish is really at no risk when tightening, if anything it would be the coil but I've torqued mine down a lil tighter here and there for the 9 months, this time it surprised me as it was way loose. I generally do a high-heat cleaning at 1000F and then back down to vaping temps of 590F.

 

[Roth]

I'm referring to the coil nut pairing to the center post. The dish is really at no risk when tightening, if anything it would be the coil but I've torqued mine down a lil tighter here and there for the 9 months, this time it surprised me as it was way loose. I generally do a high-heat cleaning at 1000F and then back down to vaping temps of 590F.

D'oh, I was thinking of the dish retention nut, not the coil nut.

But now that I'm thinking about the dish retention nut, I wonder if giving it a little tightening down when warm would be a good or bad thing.

 

[TheFatBastard]

Hi guys!

I was redirected to this thread by some forumites who told me that the FP SH is "THE VAPORIZER", maybe best Vap in the market.I've been reading and researching and I'm sold, I really need a FP SH now

The thing is...I'm based in Europe, and I can't find where to buy this (vapefiend is out of stock), and I don't want to buy in USA and deal with customs.

Also, I've seen the option of buying an enail kit from DHGate or Aliexpress ( http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-444#post-1266901 )so I've seen this: ( https://es.dhgate.com/product/new-p...c-dab/403640434.html#s2-10-1;searl|3263149379 ) and then get a Showerhead combo ( https://www.newvape.com/showerhead-combo-20mm-2 )

That's pretty cheap compared to the Showerhead Starter Kit ( https://vapefiend.co.uk/collections/e-nails/products/flowerpot-twax-starter-kit?lshst=collection )

I already have a Mobius 18mm bong, so I don't need any more glass.

Which is my best option?

Thanks a lot in advance!

 

[Zangano Cruel]

Hi guys!

I was redirected to this thread by some forumites who told me that the FP SH is "THE VAPORIZER", maybe best Vap in the market.I've been reading and researching and I'm sold, I really need a FP SH now

The thing is...I'm based in Europe, and I can't find where to buy this (vapefiend is out of stock), and I don't want to buy in USA and deal with customs.

Also, I've seen the option of buying an enail kit from DHGate or Aliexpress ( http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-444#post-1266901 )so I've seen this: ( https://es.dhgate.com/product/new-pelican-e-digital-nail-kit-electric-dab/403640434.html#s2-10-1;searl|3263149379 ) and then get a Showerhead combo ( https://www.newvape.com/showerhead-combo-20mm-2 )

That's pretty cheap compared to the Showerhead Starter Kit ( https://vapefiend.co.uk/collections/e-nails/products/flowerpot-twax-starter-kit?lshst=collection )

I already have a Mobius 18mm bong, so I don't need any more glass.

Which is my best option?

Thanks a lot in advance!

IMHO&E I’ll go straight to the VROD... you’ll have the best of both worlds in a single cheaper kit.
Don’t waste your time with another controller/s if this is your first enail system.
Straight out of the box I was dabbing, vaping and twaxing with no wait or problems. No adapters or bs to deal with.
Get at least 2 double weave Ti screens, or like me, I got both 18 & 14 males and 2 bowls, I ran 14 for oils, and 18 for flowers. 2 rigs at the same time.
If you can, order extra quartz dishes, I’ll order 2 if I were international, and 2 of their cheap SiC dishes too. They are really easy to clean and taste is awesome.
IMO flower is vaped the same through a SH and a VRod, it’s Ti being heated the same way, through same coils and Ti from same machining factory.
But where the VRod shines above the SH is on dabbing. No comparison between dabbing off Ti than quartz or even better SiC.
But you’ll say, but I never do oils, well, some day you’ll have a chance to press your own rosin, and let me tell you, you’ll regret not having the VRod.
IMO people saying the SH is better for flowers than the VRod, it’s like saying ABS brakes and paddle shifters and newer transmissions are worst for WRC cars, and cars should be still running in carburetors instead of injectors, any improvement in performance, is going to be questioned and secretly looked close by early adopters that now are too used to their first released SH or too stubborn to accept it that the new tech is better than the old, or short on cash and can’t afford the new release, like many people envying the neighbors new 2019 beemer while they have a 2018 beemer, just first world problems and normal human envy jajajaja I’ll be the same if I bought a SH.
This is IMHO&E and like people always say in this forum, “opinions are like a..h..s, everyone has their own” and like them their way jajajaja
Best...
Stay vaped....

 

[Baron23]

Hi guys - I don't stay on top of this thread nearly as much as some so perhaps I missed it...but:

while I still see the Shovel Head bowl on NV's site, I don't see the Pan Head offered anymore. Yeah, they were pretty redundant but is this just an oversight on the website or did they discontinue this bowl?

 

[Oogendoogan]

IMHO&E I’ll go straight to the VROD... you’ll have the best of both worlds in a single cheaper kit.
Don’t waste your time with another controller/s if this is your first enail system.
Straight out of the box I was dabbing, vaping and twaxing with no wait or problems. No adapters or bs to deal with.
Get at least 2 double weave Ti screens, or like me, I got both 18 & 14 males and 2 bowls, I ran 14 for oils, and 18 for flowers. 2 rigs at the same time.
If you can, order extra quartz dishes, I’ll order 2 if I were international, and 2 of their cheap SiC dishes too. They are really easy to clean and taste is awesome.
IMO flower is vaped the same through a SH and a VRod, it’s Ti being heated the same way, through same coils and Ti from same machining factory.
But where the VRod shines above the SH is on dabbing. No comparison between dabbing off Ti than quartz or even better SiC.
But you’ll say, but I never do oils, well, some day you’ll have a chance to press your own rosin, and let me tell you, you’ll regret not having the VRod.
IMO people saying the SH is better for flowers than the VRod, it’s like saying ABS brakes and paddle shifters and newer transmissions are worst for WRC cars, and cars should be still running in carburetors instead of injectors, any improvement in performance, is going to be questioned and secretly looked close by early adopters that now are too used to their first released SH or too stubborn to accept it that the new tech is better than the old, or short on cash and can’t afford the new release, like many people envying the neighbors new 2019 beemer while they have a 2018 beemer, just first world problems and normal human envy jajajaja I’ll be the same if I bought a SH.
This is IMHO&E and like people always say in this forum, “opinions are like a..h..s, everyone has their own” and like them their way jajajaja
Best...
Stay vaped....

Hahaha. Your a funny guy. Please don’t bring up peoples fianances here. That’s s all I’m gonna say about money. Also gonna say PROVE to me that the VROD is BETTER than the SH for FLOWER ONLY... from what I see people are running lower temps with “smoother” vapor. I don’t have a smoothness issue with my SH.. it’s the opposite for me. I use dry water pieces to get a feeling in my chest. I’ve also seen people having to adapt a new technique of drawing and I’ve seen pictures of abv so uneven that it made me sad.

I mean I know newvape “fixed” the problem with the airhole plug but more than a couple users have reported that if you draw too fast you can still get that horrible ring. I can understand wanting the VROD for dabbing. I hate dabbing off ti.. but I won’t get into my preferences with dabbing as I’ve done this like 10 times on this thread recently. Unfortunately the VROD seems like a step down for my use.. not a step up, so I won’t be getting one. And that’s too bad because I would just pick it up for the hell of it if it fit my controller.

I feel like newvape wants me to buy one of their shitty China PIDs in order to use the VROD and that’s why I’m not spending my money. But according to you that means I’m trying to justify my SH because I can’t afford the VROD?? Well just for you, because you care about money so much, I’ll tell you about some recent purchases. I have an argo, mighty and a set of SV3 modded plates on the way to me. I am also about to buy another vape but i think I’m waiting on the FW5. I obviously have money to spend on vaporizers man.

I literally don’t want a VROD and newvape PID because I have a good feeling I’ll be back to using my SH and quartz banger with 25mm coil very soon and the VROD will be on a shelf. Along with a useless china PID with a useless mini xlr connection that is only good for the v rod. All of my other devices with a coil all run on my auber controllers. In my opinion newvape should really think about a universal coil option because i think they’re alienating more customers like me than they are gaining new enail sales. But that’s my point of view.. from theyres I’m sure they see every new VROD sale as a potential PID sale and that’s easy money for them.

I mean they have to machine and manufacture the VROD and the bowls and just about everything they sell.
Those enail controllers are just a buy and resell game for them and they’re probably making a 50% profit margin. Kinda lame if you ask me. Like I understand them making money like that off the things they machine but I will take my PID business elsewhere. I would happily buy a VROD to try today, even with the PID issues(would have another member help me with a re wire) but I truly don’t believe it will be better for my use. You’ve never had a SH so you can’t. But maybe someone could do a side by side comparison for flower only and convince my why it’s better? I just don’t see how having to regulate my draw is better. I love being able to just rip away at my SH and get amazing results every time. That’s why I love it. Even if the experience was 5% less convenient or even just having to regulate my draw, that’s enough to make me avoiding the VROD for my use which is 100% flower with the SH and always one hit bowls at higher temps. I simply don’t like lower temps, maybe if I wanted to do low temp sessions with my FP I’d be more into the VROD.

 

[Roth]

Hey @newvape918, are there any plans to offer a 3 piece grinder in addition to your 2 piece?

I've heard nothing but good about your fine grinder, and have wanted to give it a shot. Except I just don't like 2 piece grinders

I'd love to add a 3 piece NV grinder to my arsenal! The grinder somehow looks both sleek and burly at the same time.

 

[Oogendoogan]

Hey @newvape918, are there any plans to offer a 3 piece grinder in addition to your 2 piece?

I've heard nothing but good about your fine grinder, and have wanted to give it a shot. Except I just don't like 2 piece grinders

I'd love to add a 3 piece NV grinder to my arsenal!

+1 for the idea of a 3 piece grinder. Your grinders look amazing I just hate 2 pieces because I’m lazy. I also don’t care for a pollen catch so 3 pieces would be perfect. I don’t need a new grinder but a newvape machined 3 piece sounds incredible.

 

[Baron23]

saying the SH is better for flowers than the VRod, it’s like saying ABS brakes and paddle shifters and newer transmissions are worst for WRC cars, and cars should be still running in carburetors instead of injectors, any improvement in performance, is going to be questioned and secretly looked close by early adopters that now are too used to their first released SH or too stubborn to accept it that the new tech is better than the old, or short on cash and can’t afford the new release, like many people envying the neighbors new 2019 beemer while they have a 2018 beemer, just first world problems and normal human envy jajajaja I’ll be the same if I bought a SH.

That's one of the more mangled and over-stretched metaphors I have ever read here. Wow...just wow.

And wrt:

any improvement in performance, is going to be questioned and secretly looked close by early adopters that now are too used to their first released SH or too stubborn to accept it that the new tech is better than the old, or short on cash and can’t afford the new release, like many people envying the neighbors new 2019 beemer while they have a 2018 beemer,

I personally find that mildly insulting ameliorated only by the fact that I KNOW you do NOT KNOW what motivates others here to prefer one over the other.

Might want to pull in the fangs, big boy.

 

[TheFatBastard]

Thanks for the info guys!

Well, I don't have any access to oils and I know I will not dab almost for sure, flowers are my thing, that's why I wanted the Showerhead version.

Those enail controllers are just a buy and resell game for them and they’re probably making a 50% profit margin. Kinda lame if you ask me. Like I understand them making money like that off the things they machine but I will take my PID business elsewhere. I would happily buy a VROD to try today, even with the PID issues(would have another member help me with a re wire) but I truly don’t believe it will be better for my use. You’ve never had a SH so you can’t. But maybe someone could do a side by side comparison for flower only and convince my why it’s better? I just don’t see how having to regulate my draw is better. I love being able to just rip away at my SH and get amazing results every time. That’s why I love it. Even if the experience was 5% less convenient or even just having to regulate my draw, that’s enough to make me avoiding the VROD for my use which is 100% flower with the SH and always one hit bowls at higher temps. I simply don’t like lower temps, maybe if I wanted to do low temp sessions with my FP I’d be more into the VROD.

That's why I was thinking about getting an enail controller/ bundle from China and then get the necessary accesories from Newvape.

Knowing that I'm not interested in the VRod, which is the best way to buy all I need ???

And...do you know any place else in Europe selling the Flowerpot Showerhead bundle?

 

[McBagginz]

+1 for the idea of a 3 piece grinder. Your grinders look amazing I just hate 2 pieces because I’m lazy. I also don’t care for a pollen catch so 3 pieces would be perfect. I don’t need a new grinder but a newvape machined 3 piece sounds incredible.

Agreed! I would have already purchased a new vape fine grinder except a two piece just doesn’t fit with my consumption and storage methods. I’ve eye balled it every since I first saw it and even had it in my cart before, numerous times. I ended up getting a Kannastor Gr8tr v2. I’m in love! The fine grind plate makes for some seriously fine flowerpot fuel! Fit and finish are superb imo. I’ve just been grinding herb just to grind it haha
And if I thought my flowerpot was powerful before? Phew! That finer grind packs a punch. I’d be down for a new vape 3 piece.

 

[Hogni]

@TheFatBastard ,up to now Vapefiend might be the only retailer in the EU. But I know that VDNM is interested in getting a retailer for NewVape in the future.

 

[graydeh1]

The V-ROD is an amazing vape. Ive had a few of some highly regarded vapes, this is by very far my favorite. Case and point, I was a mighty fan boy since they were released. I sold my mighty the day after I bought my wraparound as I knew it would get no more use.
Im kinda shocked still, that was my GO TO for over 3 years. I bought the Wraparound head first and love it, but I had to take advantage of the V-Rod 50% off for people who bought the shower head within 30 days before the release of the V-Rod. Even though I've got my wrap around head sitting in a box and I'll probably keep it , I love the V-Rod.

 

[EmDeemo]

Thanks for the info guys!

Well, I don't have any access to oils and I know I will not dab almost for sure, flowers are my thing, that's why I wanted the Showerhead version.



That's why I was thinking about getting an enail controller/ bundle from China and then get the necessary accesories from Newvape.

Knowing that I'm not interested in the VRod, which is the best way to buy all I need ???

And...do you know any place else in Europe selling the Flowerpot Showerhead bundle?

I suspect it may be worthwhile keeping an eye on the second hand thread.

As for buying brand new, I'm in Europe and bought before there were any European retailers. In my sig is the same PID/coils NV use, direct from the chinese seller. Everything else I got direct from NV.

IMHO, your choice of flowerpot wont disappoint and is well worth the slight extra consideration that customs bring. Sadly, I dont know of any other European retailers.

Good luck!

 

[Zangano Cruel]

I’m feeling cheeky and really high, trying to finish my good quality outdoor Cheese (mids or lower quality indoor stuff) at 606F...
I let it sit for 5ish seconds caped before start drawing for mids or low quality bud...
As I started drawing enail went down on temp

Good even dark brown ABV... and pretty consistent milk in the Clear Matrix...

Stay vaped...

 

[wall]

Got my Dnail sic dish today! has a minor scratch in in but that doesn't bother me so I'll welcome the discount. Stoked to use it!

 

[Oogendoogan]

I’m feeling cheeky and really high, trying to finish my good quality outdoor Cheese (mids or lower quality indoor stuff) at 606F...
I let it sit for 5ish seconds caped before start drawing for mids or low quality bud...
As I started drawing enail went down on temp

Good even dark brown ABV... and pretty consistent milk in the Clear Matrix...

Stay vaped...

Good hit for some mids! Bet if that were top shelf the rig would have looked like smoke! I have some outdoor bud that doesn’t vape as well right now myself. But in the FP it still milks my rigs. Gotta love a vape that gets the most outa the least

 

[wall]

Good hit for some mids! Bet if that were top shelf the rig would have looked like smoke! I have some outdoor bud that doesn’t vape as well right now myself. But in the FP it still milks my rigs. Gotta love a vape that gets the most outa the least

I put a pinch in the other day (didn't even cover the screen all the way) and got some decent vapor, that had me gitty

 

[Zangano Cruel]

Good hit for some mids! Bet if that were top shelf the rig would have looked like smoke! I have some outdoor bud that doesn’t vape as well right now myself. But in the FP it still milks my rigs. Gotta love a vape that gets the most outa the least

Oregon and Washington have a lot of surplus weed production ...
There’s everyday deals, hundreds of dispensaries between Portland, OR , Vancouver, WA 10 mile radius... they really get prizes down to compete and make customers happy, attract clients etc etc
These 2 x 1/8 cost me each $3 on Memorial Day, 7g for $6 ($24/oz jajaja), I bet there’s very few places in the US or the world they can match that, well, my country was first legalizing the whole republic, $1/g $28/oz but just 2 strains, alpha#1 & beta#1, very creative government controlled jajajaja

Check the low THC outdoor levels

Nothing compared to this....

A++ underground bud... organic indoor bla bla bla first world hipsterism, my friend grower, at $140/oz extra sticky itchy in the nose eye watering vapor...
You can tell the difference even by watching the vapor color in the rig, blueish/cottonish dense white vapor from A++ vs greish white dense vapor from regs/mids... besides the noticeable vapor flavor/taste... even eyes shut you’ll notice, both VRod and SH I imagine...
Stay vaped...

 

[Zangano Cruel]

Come and visit next 7/10... I’ll show you around town jajajaja

 

[Chris_CH]

+1 for the idea of a 3 piece grinder. Your grinders look amazing I just hate 2 pieces because I’m lazy. I also don’t care for a pollen catch so 3 pieces would be perfect. I don’t need a new grinder but a newvape machined 3 piece sounds incredible.

not immediate plans. but youll be the first to know when we do!

EDIT: not for lack of trying. this is an older design, but we found that it was a design we had to revisit. so im sure at some point Ed will make some room to think about this. That time is not now tho. soonish lol

 

[Danksta]

Just dropping in to remind everyone how great WHOLE NUG is with the FP. Even as high as 777 the flavor is so good.

Fine grind is great when you just wanna tear through bowl after bowl after bowl but whole nug is flavor city.

700 is my current fav number for whole nug.

 

[LabPong]

Just dropping in to remind everyone how great WHOLE NUG is with the FP. Even as high as 777 the flavor is so good.

Fine grind is great when you just wanna tear through bowl after bowl after bowl but whole nug is flavor city.

700 is my current fav number for whole nug.

How big of a load is your whole bud? I have not really did any whole buds in the FP. At 700+....I would think you do not use a carb......how many draws are you getting with a nug? Or are you putting in smaller sections to clear in 1 or 2 draws?

 

[psychonaut]

Just dropping in to remind everyone how great WHOLE NUG is with the FP. Even as high as 777 the flavor is so good.

Fine grind is great when you just wanna tear through bowl after bowl after bowl but whole nug is flavor city.

700 is my current fav number for whole nug.

That's what I do with my stevenlmz glass bowls, love those hits!

 

[Chris_CH]

Just dropping in to remind everyone how great WHOLE NUG is with the FP. Even as high as 777 the flavor is so good.

Fine grind is great when you just wanna tear through bowl after bowl after bowl but whole nug is flavor city.

700 is my current fav number for whole nug.

This is interesting. Anyone else do this?

The whole theory is that the fine grind will cover more surface on the screen so you can get even...coverage...but this is really interesting.