Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Dubmonkey
Well-Known Member
@gunmetalshark can you please share what brand of ash catcher that is and where I can get a similar set up? Tried checking the EHLE site but couldn’t find the pieces.
gunmetalshark
Glass Addict
The Ash catcher is from Stevenlmz79 of DHGate ( https://de.dhgate.com/product/12-5cm-tall-mobius-ash-catcher-matrix-percolator/404531573.html ), Dropdown is a custom made one from Ehle..i am planning to have them rebuild the ash catcher aswell, Steven´s works good but Ehle Joints are PERFECT and i want it with a "higher" base so it reaches the bottom 
With the right amount of water draw resistance is nearly non-existent, i love the vapor build up in the main chamber and when i see it clearing in the smaller ashcatcher-chamber i know exactly when to stop and get a full extraction every time...rly in love with this setup
With the right amount of water draw resistance is nearly non-existent, i love the vapor build up in the main chamber and when i see it clearing in the smaller ashcatcher-chamber i know exactly when to stop and get a full extraction every time...rly in love with this setup
Last edited:
It was a little bit ago, I read a LOT of the thread to understand what is going on. I still need to read a LOT more for my OCD of knowledge.
I'm just about to order though and just learn as I go. From everything I've read and everyone I've talked to so far, everyone loves this thing. Now that I'm moving in a couple of weeks I have the space to actually set this up.
disGRUNTled
Well-Known Member
Super Sour Diesel and the Pizza Show.
lazylathe
Almost there...
Still busy packing up the house and trying to keep up with this thread...
We move in a week and i cannot wait to get all setup again!
The ShowerHead has had center stage for quite some time now!
I received both of the new bowls, Pan-Head and Shovel-Head as well as the new Ti double weave screen, a few weeks ago! I also bought a 14mm stubby bowl! That's a grand total of 4 bowls for my FP!
My Shovel-Head is set up with the Ti screen and a 14mm stem.
The Pan-Head is using an 18mm stem, it fits perfectly in my RooR and never sticks!
I like rotating bowls using screens and EQ baskets for different experiences.
Controller is set at 605F and i use it 90% uncapped.
This vape is a monster!
We move in a week and i cannot wait to get all setup again!
The ShowerHead has had center stage for quite some time now!
I received both of the new bowls, Pan-Head and Shovel-Head as well as the new Ti double weave screen, a few weeks ago! I also bought a 14mm stubby bowl! That's a grand total of 4 bowls for my FP!
My Shovel-Head is set up with the Ti screen and a 14mm stem.
The Pan-Head is using an 18mm stem, it fits perfectly in my RooR and never sticks!
I like rotating bowls using screens and EQ baskets for different experiences.
Controller is set at 605F and i use it 90% uncapped.
This vape is a monster!
ParanoidAndroid998
Well-Known Member
Wow, I just vaped a whole bowl at 605F and that's definitely my new favorite way to do it. Tasssttyy hits.
Last edited:
Justpassedu
Well-Known Member
@abcd5432 best of luck , i think you will really like it and while it may seem a little complicated in the setup once its actually all in your hands , its like legos and super easy to figure it all out. Always great to have some room for a vape station , if you need any help at all feel free to pm me anytime or just post on the thread.
@lazylathe good luck with the move man , glad you got some really nice parts , i am loving the new style bowls with the double weave screen , not only do they look great but they work really well also.
@lazylathe good luck with the move man , glad you got some really nice parts , i am loving the new style bowls with the double weave screen , not only do they look great but they work really well also.
Trifecta
Dr. Says I Need a Backiotomy
Yeah right around 600 seems to be the sweet spot and I have yet to get combustion no matter how slowly i draw. My ABV could probably still be vaped a bit but the desired result is achieved and then some. If it ain't broke, don't fix it. I love this thing!!!
dontmindme
Active Member
Newvape
Is there anyway you can have the adjustabowls to accomdate a health stones taper? Would decrease the costs for people looking to dab and offer something similar to elev8’s glass vaporizer.
Or maybe i’ll just fill the gaps if its too small with herb... but if its too big... i think vaporgenie also sells a fritted ceramic insert or 7th floor.
Is there anyway you can have the adjustabowls to accomdate a health stones taper? Would decrease the costs for people looking to dab and offer something similar to elev8’s glass vaporizer.
Or maybe i’ll just fill the gaps if its too small with herb... but if its too big... i think vaporgenie also sells a fritted ceramic insert or 7th floor.
Last edited:
7th floor sells the ceramic flavor disks in a few different sizes.
dontmindme
Active Member
Yeah, just saw.
7thfloorvapes.com/index.php/seventhfloorvapes/ceramic-flavor-disc.html
7thfloorvapes.com/index.php/seventhfloorvapes/ceramic-flavor-disc.html
Last edited:
Yes sir!
lazylathe
Almost there...
I have been testing for a few weeks now and anywhere from 600 to 613 works extremely well!
Lower end for drier herb and hotter end for more moist herb.
Whitewalls like crazy and the flavor is off the charts!
A quick stir and another small hit and i am left with a yellowish/tan/slight tint of green ABV.
Perfect as i have extracted what i wanted and there was no burnt or popcorn taste!
No need to have dark ABV for the medicating effects to hit hard and strong!
@steama I may be preferring the Sh now! Fully manual vape, activated by lung power!
Vaping a Dispensary owners custom strain!
Tamara Jane, supposed to be a crossing of Grapefruit, Mowi Wauwie and Pineapple.
Very fruity tasting and produces crazy vapor!! Hits like a freight train!
Yup, even at 800F on the PID I can get AVB just like that, straw colored with minor green flecks! Instant white walls!
Glad you stuck with it.
Getting great hits is easy I think with the SH, really mastering it and fine tuning the whitewalling, to your own happy temp is the bit that takes a bit of time I think. I think it was in this thread someone got snippy at me for even daring to suggest such a thing but what can I say, we're all clouding it up a storm thanks!
Just seeing all these different numbers, some being wildly different from others, and everyone saying the same 'dialed in' phrases.
I fucking love it
Personally, capped, @640f, the air flow temp under the bowl is somewhere in the 420f range (got it written down somewhere), so there I stay, never going any higher unless its solids or concentrates
I have something nice coming for xmas I think, so I'll probably have to start lowering temps so as to not invoke the Lord of Wheeze and his all consuming breathe stealer!
I still unashamedly love this fucking vapouriser!
Danksta
Well-Known Member
The first hit of full nug at any temp is just amazing. I don't think extracts can offer this kind of flavor. They get really close but I haven't had anything recently that makes me want to reduce my flower intake. There is nothing like vaping unprocessed terps and cannabanoids.
I don't think extracts can offer this kind of flavor. They get really close but I haven't had anything recently that makes me want to reduce my flower intake. There is nothing like vaping unprocessed terps and cannabanoids.
Bring on the dry sift! Concentrated terpenes and cannabinoids in their complete spectrum and profile!
lazylathe
Almost there...
Glad you stuck with it.
Getting great hits is easy I think with the SH, really mastering it and fine tuning the whitewalling, to your own happy temp is the bit that takes a bit of time I think. I think it was in this thread someone got snippy at me for even daring to suggest such a thing but what can I say, we're all clouding it up a storm thanks!
Just seeing all these different numbers, some being wildly different from others, and everyone saying the same 'dialed in' phrases.
I fucking love it
Personally, capped, @640f, the air flow temp under the bowl is somewhere in the 420f range (got it written down somewhere), so there I stay, never going any higher unless its solids or concentrates
I have something nice coming for xmas I think, so I'll probably have to start lowering temps so as to not invoke the Lord of Wheeze and his all consuming breathe stealer!
I still unashamedly love this fucking vapouriser!
I think the variances have a lot to do with the controllers and the coils.
My controller is a cheap China one, I need to try it with the RDK200 and see how it works.
If i run my SH at 640F capped my herb will be super dark brown and have an almost burnt taste to it.
While i run my OGFP at 680F capped from start to finish.
For myself this is just such a super simple vaporizer!
I hardly ever change temps and it ALWAYS delivers!
I love that it is always on as well!!
To me the coolest part of this vape is that when i use the ShowerHead, I feel connected to all the FC members that put thought, hours of excruciating testing and pages of notes!!
I thank you!
Danksta
Well-Known Member
I agree. I've been pretty impressed just with the kief from my grinder. Sooooo tasty!
lazylathe
Almost there...
That sprinkling of grinder kief certainly adds a serious kick!