Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

muunch

muunch

hotboxing the cockpit
I started lower as well, but remember, MY 650f is probably different from your 650f - at least in terms of the temps of the dish, and the temp of the air running thru the herb.

I like 640ish. No pooling of dabs, can kill a .1g herb load without showercap and the taste on both is fantastic.
I haven't used my SiC since I got the showerhead, but idk. I'm not religious with my qtipping and sometimes I won't... I haven't cleaned the showerhead at all since I got it... kinda just poked some of the burnt black spots off last week... the taste is pretty good for dabs. Def not as good as the SiC but I never noticed a loss of flavor after qtipping... I usually wait a bit before my next go though.
 
lazylathe

lazylathe

Almost there...
biohacker said:
I use about .1g-.15g in the sv3 and never, ever break them down because it's absolutely not required. The sv3 obliterates whatever you put in it, and other than the herbalaire and vapolution, I can't think of any vape that is as good and efficient with unground material. But, different strengths for different vapes. The FP is convection, so should more than likely require somewhat of a shred (like you do), and stir has been recommended by some, and not by others. I just hope that this vape doesn't turn out like my lsv, nano, vhw, etc...convection vapes that annoyed me with hotspots and stirring, yet this one seems to not share those same issues @lazylathe you were mentioning?

One of the biggest reasons I want this bad boy is due to all the feedback from the sv3 and FP fanboys! But thanks to everyone, this thread has such a similar vibe to the sv3 thread!

Just curious about that ti taste claim? Is it really noticeable? Something i've never ever tasted with the sv3...only taste the tasty herbs, never the metal!



I think it refers to low quality herbal essences. But I could be wrong!
Click to expand...

Never had any hotspots in any bowl, using the screen or the EQ basket.
I do stir because i usually load a touch more than i can handle in one hit and want it extracted a bit more... Sometimes it works out perfectly though!
I actually broke out the VHW a few weeks ago to compare and first hit...hotspot...back in the drawer...
No comparison to the LSV or the Nano either.

I hate using any metallic drinking utensils, they all have that odd taste to me!
The FP has no noticeable taste at all!
 
invertedisdead

invertedisdead

PHASE3
Manufacturer
anasrzi said:
I find it hard to go above 675f with my flowerpot and dnail SiC dish, the flavour goes down hill to much for my liking when using herb. Been experimenting once more this week end and think I'm closing in on what my ideal temp is.

I think between 630-640f is going to be around about ideal for me for flavour it's just the extraction at these low temps that sucks a bit, perhaps a little time sat on the bowl will help with that, little bit of conduction to help that out?

I'm eager to get more uses out of my SiC dish now. Tired some high end bubble in it last night, good flavour and cleaned ok with a qtip but I find the taste suffers after a qtip clean, anyone else find this? So I'm going back to pressing some bubble hash rosin and dab I think from there.

Trying to find a sweet spot for both oil and herb is tricky without sacrificing flavour.
Click to expand...

Did you use full melt bubble? if it's not super melty you'd be better off pressing rosin or just throwing it in the herb bowl. Are you using the coil cover?

I've never heard of Q-tipping making flavor worse. I can say it makes a giant different in flavor and harshness between my nail which is swabbed religiously, and my friends who never Q tips ever. When you say the extraction sucks at 640, can you quantify that a bit? What sucks about it? How many draws are you taking? How long are your draws? Are you carb capping when hitting flowers?

I've been curious about how easy it is to align temps between the herb bowl and the SiC dish since the thermal conductivity is quite different between the two materials. Hopefully @Justpassedu will chime in as he has a SiC Halo.
 
Justpassedu

Justpassedu

Well-Known Member
invertedisdead said:
Did you use full melt bubble? if it's not super melty you'd be better off pressing rosin or just throwing it in the herb bowl. Are you using the coil cover?

I've never heard of Q-tipping making flavor worse. I can say it makes a giant different in flavor and harshness between my nail which is swabbed religiously, and my friends who never Q tips ever. When you say the extraction sucks at 640, can you quantify that a bit? What sucks about it? How many draws are you taking? How long are your draws? Are you carb capping when hitting flowers?

I've been curious about how easy it is to align temps between the herb bowl and the SiC dish since the thermal conductivity is quite different between the two materials. Hopefully @Justpassedu will chime in as he has a SiC Halo.
Click to expand...
I use my dnail Sic halo with the wrap around head more frequently than my Showerhead , not to say I don't enjoy both of them. I am just getting great results with both using flower , a restrictive draw is something that never pops up and maybe that is bc I have many portables that have some restriction and I am just so used to it that when I use the non sh fp it's hard to notice anything for me. Percs on your own glass also come into play. As for aligning temps I have no tools to really tell but at 640f I am really comfortable using my dnail halo with the fp for both flower and concentrate . I had friends test also and they liked it allot and never mentioned anything about restriction of air flow. I no this wasn't your main question , just wanted to bring it up for others . If I can try anything out for you please lmk ? Oh and I always q tip after every hit for the most part , maybe after every two, this really helps keep things clean so you can differentiate different flavors of concentrate .
 
anasrzi

anasrzi

Well-Known Member
One of the grades was full melt the 73u, much lighter in colour @invertedisdead .They all worked but they caked up the nail a bit and took extra cleaning unlike the oil. Yeah normally I do just make bubble, allow all the grades to mix up and then press for rosin.

I have the coil cover yes. It's not so much worse that's my bad choice of words sorry I think it's because of the lesser hash still being present and baking onto the nail despite being q tipped off. Again it doesn't so much "suck" it's just not as thick as I'd ideally like, I'm used to supreme hits which are very dense, these hits are a bit thinner. I do carb cap with a dnail carb cap as I have the dnail SiC dish so it's tight.

My hits are pretty long as my lungs are pretty ruthless at hard hits, flavour is top notch, effects are awesome too just not quite think enough. Hopefully @Justpassedu will chime in like you say.

Yeah I'd say there's something in that because they are different materials. The nails hits sweet around 615f and up. I'm trying to nail a temp for both to retain maximum flavour and thickness of vapour, perhaps a impossible dream :huh:.

I know where your coming from @Justpassedu i have a few portables that have way more restriction than the FP, I love the SiC on the flowerpot dabs are intense on that thing.

Think it's a case of trial and error with the temps being setup us right, 640f is about where I expect to hit the sweet sport. Tried at 650 and 675 last night, 650 was really good on all counts, 675 was a tad harsh imo. Each enail is going to be different I assume, I have the wrap round to btw.

Do you qtip dry or with a moist qtip first then dry after?
 
Last edited:
ataxian

ataxian

PALE BLUE DOT
lazylathe said:
Never had any hotspots in any bowl, using the screen or the EQ basket.
I do stir because i usually load a touch more than i can handle in one hit and want it extracted a bit more... Sometimes it works out perfectly though!
I actually broke out the VHW a few weeks ago to compare and first hit...hotspot...back in the drawer...
No comparison to the LSV or the Nano either.

I hate using any metallic drinking utensils, they all have that odd taste to me!
The FP has no noticeable taste at all!
Click to expand...
I look to you as the ALBERT EINSTEIN of VAPORIZING!

The thing I like about the FP is no Glass GonG's to shatter everywhere?

After breaking 2 GonG's this week-end?

FLOWER POT is starting to make financial sense?

I hear you on glass for drinking.
Drink ware all glass!
 
Justpassedu

Justpassedu

Well-Known Member
anasrzi said:
One of the grades was full melt the 73u, much lighter in colour @invertedisdead .They all worked but they caked up the nail a bit and took extra cleaning unlike the oil. Yeah normally I do just make bubble, allow all the grades to mix up and then press for rosin.

I have the coil cover yes. It's not so much worse that's my bad choice of words sorry I think it's because of the lesser hash still being present and baking onto the nail despite being q tipped off. Again it doesn't so much "suck" it's just not as thick as I'd ideally like, I'm used to supreme hits which are very dense, these hits are a bit thinner. I do carb cap with a dnail carb cap as I have the dnail SiC dish so it's tight.

My hits are pretty long as my lungs are pretty ruthless at hard hits, flavour is top notch, effects are awesome too just not quite think enough. Hopefully @Justpassedu will chime in like you say.

Yeah I'd say there's something in that because they are different materials. The nails hits sweet around 615f and up. I'm trying to nail a temp for both to retain maximum flavour and thickness of vapour, perhaps a impossible dream :huh:.

I know where your coming from @Justpassedu i have a few portables that have way more restriction than the FP, I love the SiC on the flowerpot dabs are intense on that thing.

Think it's a case of trial and error with the temps being setup us right, 640f is about where I expect to hit the sweet sport. Tried at 650 and 675 last night, 650 was really good on all counts, 675 was a tad harsh imo. Each enail is going to be different I assume, I have the wrap round to btw.

Do you qtip dry or with a moist qtip first then dry after?
Click to expand...
Always a dry qtip first , thana drop of ISO or water after , this way I am almost never taking my nail off for cleanings .

@ataxian you da man , you don't have to purchase everything in one shot to get started. You can always grab the minimumand upgrade as needed. I think this vape would be perfect for you and you'd never need another vape again . You can always start with a head and nut and bowl , Carb cap , stand and a enail is needed. The rest can be purchased down the line if your Vas starts flaring up. Haha
 
ataxian

ataxian

PALE BLUE DOT
Justpassedu said:
Always a dry qtip first , thana drop of ISO or water after , this way I am almost never taking my nail off for cleanings .

@ataxian you da man , you don't have to purchase everything in one shot to get started. You can always grab the minimumand upgrade as needed. I think this vape would be perfect for you and you'd never need another vape again . You can always start with a head and nut and bowl , Carb cap , stand and a enail is needed. The rest can be purchased down the line if your Vas starts flaring up. Haha
Click to expand...
The FLOWER POT does not need a GonG?
All vaporizer companies GonG'S are out.

MODERNIZE=CIVILIZED

@lazylathe it's your fault for getting me addicted to ROSIN? (now I need it even on Sunday)

I'm the only person to MEDICATE on the WEST COAST on this FORUM?

It seem's like a ghost town?

Right: "There all in CHURCH or something"?

READ NON-FICTION (you might learn a thing or two)!
 
muunch

muunch

hotboxing the cockpit
ataxian said:
The FLOWER POT does not need a GonG?
Click to expand...

TonG

Ti on glass man! If you remember to take the bowl (the piece with the handle) off of your glass after every hit, that's all you need! Just that bowl, and your glass piece of choice. You may use adapters, since there is a different $40 body for 18mm and 14mm male bodies, but the female bodied FP fits both 14mm AND 18mm glass! It all depends on what glass you have and prefer to use of course!

I'll be on the west coast in a few months friends :) Last year here in the shitstain known as the bible belt!
 
ataxian

ataxian

PALE BLUE DOT
muunch said:
TonG

Ti on glass man! If you remember to take the bowl (the piece with the handle) off of your glass after every hit, that's all you need! Just that bowl, and your glass piece of choice. You may use adapters, since there is a different $40 body for 18mm and 14mm male bodies, but the female bodied FP fits both 14mm AND 18mm glass! It all depends on what glass you have and prefer to use of course!

I'll be on the west coast in a few months friends :) Last year here in the shitstain known as the bible belt!
Click to expand...
Some say the 20mm is the ticket?
Their is a 16mm as well.

What is better flavor wise?

BIBLE BELT? I hear it's becoming CIVILIZED of late?
I traveled there before. (CALIFORNIA is the BEST STATE MPOV)
I've been around the world and most of the states.
Maybe I'm bias?
HAWAII can be CIVILIZED.
 
Last edited:
muunch

muunch

hotboxing the cockpit
20mm and 16mm refers to coil size!

18mm and 14mm refer to the glass fittings my friend!

20mm is the way to go! It is the only one that will fit the showerhead (...right? :hmm:)

As far as the body goes, just pick whichever works best for your favorite glass! The FC-UFO should work great with the flowerpot! Mine arrives tomorrow :science: 18mm male body will work for that!

https://www.newvape.com/flowerpot-male-body-with-handle-1

just take it out of your glass after each hit, after you put the head on the stand.

20mm+Showerhead will give you great flavor for both flower and concentrates. I think you will MUCH prefer the taste to your mod+thcjuice method :)

Sorry, I'm a little high! Busted out the shatter stash early tonight!

The bible belt is anything but civilized! I live in a small college town and fear for my safety carrying any amount of herbs on me anywhere I go! I'm originally from Long Island where @Justpassedu is! I miss it but I need to experience some of this west coast living myself. You have me dreaming of colas @ataxian !! I have family all over the west, in AZ, CA and OR! I graduate in June and will be moving somewhere over there after :)
 
Last edited:
Justpassedu

Justpassedu

Well-Known Member
@ataxian no gong needed but you can use one if you like , 16mm and 20mm have the same flavor . 20mm is the ticket though being a drop larger for heat retention.

Quick video with just some hand torn nugs, no grinding . Flavor was on point , not as dense as my usual hit. Colored up my titanium nice , it kind of matches my glass colors a bit. This is the 20mm wrap around with dnail Sic halo. 640F .
 
M

morvis

Well-Known Member
Ok, it's been about a month since I've started using mine and I've gotta say, the 'honeymoon period' hasn't ceased, that's for sure =).

I like to use a somewhat-measured amount on my .001 scale, usually about .042 - .048 to start with on anytime I get a different batch of herbs then adjust as needed for potency. And potency differences really show! I've had some where i've needed a little over .050 for what I like, and some where the .03's have been just fine.

I even ran some lower-mid grade through, something that seemed to have little smell in bag, it brought out a subtle little herby-fruity taste in the steam.

I was going to send my bowl in for the free update but I don't want to go that long without mine, and this works so well for me I'm not going to bother. I may buy another eventually I suppose, if I want those features.
 
ataxian

ataxian

PALE BLUE DOT
VisiblyVaped said:
@ataxian I highly recommend the flowerpot with the showerhead and shower cap. I've seen you in many threads, and I think given your taste in vapes you'll find the FP EXTREMELY CIVILIZED and financially responsible....
Click to expand...
I love WILLIE'S simple take on life!
His GUITAR TRIGGER is such a statement!

I'm going up North in CALIFORNIA tomorrow. When I return it's order time.

I'm pissed off with all the GonG's I've broken!

I hate throwing $$$ in the trash.

Beach Cities in Orange County is a bubble.
I live in a bubble!
 
E

EmDeemo

ACCOUNT INACTIVE
Controller box died. This is going to be an interesting test to see how DHGate deals with it :)

Gone back to the Auber 16mm OGFP (thankfully not sold it yet!).

Was kinda thinking 'oh no, a step backwards!', but really, it so isnt :) Still a fantastic experience!

OGFP/SH FTW! All of it! The whole range! :)
 
btka

btka

Well-Known Member
emmdeemo said:
Controller box died. This is going to be an interesting test to see how DHGate deals with it :)

Gone back to the Auber 16mm OGFP (thankfully not sold it yet!).

Was kinda thinking 'oh no, a step backwards!', but really, it so isnt :) Still a fantastic experience!

OGFP/SH FTW! All of it! The whole range! :)
Click to expand...
my controller box is on its way to me from dhgate... please let me know how they solve your problem....
 
You must log in or register to reply here.
Top Bottom