Gear Bubbleman Trinity Tank

[THC SCIENTIFIC]

Cool I'll have to try one
Do you know where to get a vial/glass with a conical bottom large enough to stick on a hot plate with magnetic stir?

Maybe try this? i would look at the 10ml versions as it gives you lots of room to mix so it wont spill over.

Plus doing a full 0.25ml of terpenes with 2-6 grams of oil at the same time makes it really nice


@420democrat

Sorry forgot the link.

https://www.theworldinscents.com/products/high-recovery-v-vials-cyber-week-offer

 

[420democrat]

Maybe try this? i would look at the 10ml versions as it gives you lots of room to mix so it wont spill over.

Plus doing a full 0.25ml of terpenes with 2-6 grams of oil at the same time makes it really nice


@420democrat

Sorry forgot the link.

https://www.theworldinscents.com/products/high-recovery-v-vials-cyber-week-offer

You are the man thank you

 

[Danksta]

Wow those vials look perfect for our use. Thanks for the killer tip

 

[420democrat]

Wow those vials look perfect for our use. Thanks for the killer tip

Ordered 2! Now to find some better syringes I always feel like I leave a lot of waste to my syringe

 

[mc]

Maybe try this? i would look at the 10ml versions as it gives you lots of room to mix so it wont spill over.

Plus doing a full 0.25ml of terpenes with 2-6 grams of oil at the same time makes it really nice


@420democrat

Sorry forgot the link.

https://www.theworldinscents.com/products/high-recovery-v-vials-cyber-week-offer

Should my trinity be getting as hot as it does? After just a few pulls the thing is too hot to touch the glass and the battery starts to get hot. A couple more pulls and the mouthpiece quickly gets to get too hot for my lips.

 

[THC SCIENTIFIC]

Should my trinity be getting as hot as it does? After just a few pulls the thing is too hot to touch the glass and the battery starts to get hot. A couple more pulls and the mouthpiece quickly gets to get too hot for my lips.

Yes if cool down hits are not done and not allowed to rest between hits.


You have the understand normal tanks this size usually use about 6 watts of power while the Trinity uses 14 watts.

You chain vaping it usually will not give it ample time to cool down.

That is why Cool down hits and is recommended waiting a min or 2 between hits.


The XL is wider by 3mm and longer by 10mm.

Also using it under TC on our next gen Mod we have coming out keeps it from getting warm that fast specially with the new XL.

 

[mc]

Yes if cool down hits are not done and not allowed to rest between hits.


You have the understand normal tanks this size usually use about 6 watts of power while the Trinity uses 14 watts.

You chain vaping it usually will not give it ample time to cool down.

That is why Cool down hits and is recommended waiting a min or 2 between hits.


The XL is wider by 3mm and longer by 10mm.

Also using it under TC on our next gen Mod we have coming out keeps it from getting warm that fast specially with the new XL.

great thanks! So will I be stuck buying a new full kit for the xl version? I just purchased the kit and a spare tank.

 

[THC SCIENTIFIC]

great thanks! So will I be stuck buying a new full kit for the xl version? I just purchased the kit and a spare tank.

Not really you can just get the Tank as they are available to be purchased separately.


I am putting up the product page right now will do pictures later on.


https://www.w9tech.com/cartridges/bubbleman-trinity-xl-tank/

Soon as i get a production model in my hands as all the ones i have have been scratched up to much to be used for photo shoot.

 

[invertedisdead]

Nice capacity, I like the idea that you can load a fully terped gram in this one.

 

[invertedisdead]

@THC SCIENTIFIC

Woah... replacement heater...
https://www.w9tech.com/cartridges/bubbleman-trinity-xl-replacement-heater/

Trinity XL = game changer

 

[elmoe420]

@THC SCIENTIFIC Looking awesome!! Any pictures you can share of the replacement heaters? I pre-ordered anyway, couldn't resist!

Also does this mean Persei v6 will be finally hitting the market?

 

[THC SCIENTIFIC]

@THC SCIENTIFIC Looking awesome!! Any pictures you can share of the replacement heaters? I pre-ordered anyway, couldn't resist!

Also does this mean Persei v6 will be finally hitting the market?

We have the final production model being produced right now but we have decided to make the 8 a side loading mod. The Persei will be Temperature control line to be used with the Trinity, AC, Triton and Hercules line that will be a Single 18650 with top loader. It will be designed specifically for our attachments.

So recap


New Persei is not a side loading mod the 8 will be a side loading mod.

Our signature

Omicron Persei 8 product line will once again be full.



And on that note here is a look at the tank @elmoe420

This first image is the tank second version of the XL prototype.

This versions which is the third version of the Trinity XL shows the third version top is now two piece to allow faster refills.

The Final Trinity XL tank will be 10mm longer and have different bottom orings.

The length increase is needed to help reduce heat.

Also you will see a side flow air flow that will now allow it to work with all mods.

 

[elmoe420]

We have the final production model being produced right now but we have decided to make the 8 a side loading mod. The Persei will be Temperature control line to be used with the Trinity, AC, Triton and Hercules line that will be a Single 18650 with top loader. It will be designed specifically for our attachments.

So recap


New Persei is not a side loading mod the 8 will be a side loading mod.

Our signature

Omicron Persei 8 product line will once again be full.

...

The Final Trinity XL tank will be 10mm longer and have different bottom orings.

The length increase is needed to help reduce heat.

Also you will see a side flow air flow that will now allow it to work with all mods.

Looks great man. I'm a big fan of the gen 1 Trinity and you fixed I think all of my major complaints in this second gen. Can't wait to try it! I got 2g of distillate in the fridge waiting just for this guy!

Only thing to add is for gen 3 I'd love to see you experiment with top airflow designs.

 

[PPN]

Oh yes! the XL Trinity Tank would be awesome!

 

[SamuraiSam]

We have the final production model being produced right now but we have decided to make the 8 a side loading mod. The Persei will be Temperature control line to be used with the Trinity, AC, Triton and Hercules line that will be a Single 18650 with top loader. It will be designed specifically for our attachments.

So recap


New Persei is not a side loading mod the 8 will be a side loading mod.

Our signature

Omicron Persei 8 product line will once again be full.

Awesome holiday news... I can't wait to buy a new Persei!

Now, I am most looking forward to seeing and trying the new Trinities, and finding a favorite style/size...
And then campaigning to have a Nibbler made for it, of course. I mean, it looks like there's already an O ring groove for one in the mouthpiece of the first gen Trinity

 

[mc]

some sort of heatsink on the glass that's removable would be awesome.

 

[THC SCIENTIFIC]

Looks great man. I'm a big fan of the gen 1 Trinity and you fixed I think all of my major complaints in this second gen. Can't wait to try it! I got 2g of distillate in the fridge waiting just for this guy!

Only thing to add is for gen 3 I'd love to see you experiment with top airflow designs.

Gen 3 huh that’s already getting its second version of the prototype to finalize, but we are already ahead of that and have produced the first gen 5 prototype as gen 4 needs some work.


You will enjoy it.

Awesome holiday news... I can't wait to buy a new Persei!

Now, I am most looking forward to seeing and trying the new Trinities, and finding a favorite style/size...
And then campaigning to have a Nibbler made for it, of course. I mean, it looks like there's already an O ring groove for one in the mouthpiece of the first gen Trinity

We have thought about making a nibbler for it and have a prototype for the original once we are done with the Trinity line we’ll get into getting a nibblers out.


@mc the new Trinity XL should be better then the standard Trinity for heat reduction but we are working on it and will have a fix for it I think with our Persei.

 

[THC SCIENTIFIC]

I found these old images

Here im testing with ejuice.

 

[mc]

I found these old images

Here im testing with ejuice.

So is that one piece with the holes and coil inside the replacement heater that we can buy extra of?

 

[THC SCIENTIFIC]

So is that one piece with the holes and coil inside the replacement heater that we can buy extra of?

Not sure i understand what you mean.

But i think i get it.

The top is the tank and the bottom image shows it taken apart for cleaning.

The heater is the tube part that has the small holes.

 

[mc]

Not sure i understand what you mean.

But i think i get it.

The top is the tank and the bottom image shows it taken apart for cleaning.

The heater is the tube part that has the small holes.

Someone posted a link on your website for the Trinity XL replacement heater. That's what I assumed was the heater you showed here.

 

[THC SCIENTIFIC]

Someone posted a link on your website for the Trinity XL replacement heater. That's what I assumed was the heater you showed here.

Not that i know of but i think you got mixed up and thought the original Trinity was the heater.

But its all good.

 

[mc]

Not that i know of but i think you got mixed up and thought the original Trinity was the heater.

But its all good.

I'm not mixed up or confused at all, I'm asking you if that piece in the picture is this;

https://www.w9tech.com/cartridges/bubbleman-trinity-xl-replacement-heater/

Someone asked you on the last page but you didn't answer.

 

[THC SCIENTIFIC]

I'm not mixed up or confused at all, I'm asking you if that piece in the picture is this;

https://www.w9tech.com/cartridges/bubbleman-trinity-xl-replacement-heater/

Someone asked you on the last page but you didn't answer.

I do apologize i guess i was the one mixed up.

Yes that link you provided is the part that is the replaceable coil.

 

[mc]

I do apologize i guess i was the one mixed up.

Yes that link you provided is the part that is the replaceable coil.

awesome, thanks! I love the option to replace just a the coil since this thing would mostly be used with rosin, which can be very dirty.