Boundless Tera

BigJr48

BigJr48

Well-Known Member
Kenny Walnuts said:
My first 3D print. I used a 18mm Hydromax stim. The stim mates with the bowl, more or less, essentially giving a glass vaper path. Its attached using a stronger neodymium magnet then Boundless uses, using the magnets was a great choice though. I can shake the Tera while holding it by the stim sideways and it’s rock solid. But It comes off easy enough that it’s not awkward. The SBL Hydromax mouth piece gives it some extra cooling. Next I’m going to make one that uses the 3D mouthpiece for the Airizer.
Afzik6a.jpg
H4mVrAV.jpg
WcP3kPU.jpg
4AOfINR.jpg
wMo72cv.jpg
Click to expand...
I'll take two, great work!!!
 
stickstones

stickstones

Vapor concierge
Kenny Walnuts said:
My first 3D print. I used a 18mm Hydromax stim. The stim mates with the bowl, more or less, essentially giving a glass vaper path. Its attached using a stronger neodymium magnet then Boundless uses, using the magnets was a great choice though. I can shake the Tera while holding it by the stim sideways and it’s rock solid. But It comes off easy enough that it’s not awkward. The SBL Hydromax mouth piece gives it some extra cooling. Next I’m going to make one that uses the 3D mouthpiece for the Airizer.
Afzik6a.jpg
H4mVrAV.jpg
WcP3kPU.jpg
4AOfINR.jpg
wMo72cv.jpg
Click to expand...
hell yeah!
 
Boundless Vape Technology

Boundless Vape Technology

Well-Known Member
Manufacturer
Kenny Walnuts said:
My first 3D print. I used a 18mm Hydromax stim. The stim mates with the bowl, more or less, essentially giving a glass vaper path. Its attached using a stronger neodymium magnet then Boundless uses, using the magnets was a great choice though. I can shake the Tera while holding it by the stim sideways and it’s rock solid. But It comes off easy enough that it’s not awkward. The SBL Hydromax mouth piece gives it some extra cooling. Next I’m going to make one that uses the 3D mouthpiece for the Airizer.
Afzik6a.jpg
H4mVrAV.jpg
WcP3kPU.jpg
4AOfINR.jpg
wMo72cv.jpg
Click to expand...
Wow, this looks like it works great! Appreciate your time and efforts. I definitely am pushing our manufacturer to get us more mouthpiece options and hope this can happen soon. Something along these lines I feel would be amazing.
 
Likes2vape

Likes2vape

Well-Known Member
Received my Tera today. It’s charging now but man it stinks!! I am going to soak the silicone pieces in some vinegar or something. I am not at all sensitive to silicone but this is bad. I’ll report back after a soak and a couple bowls.
 
Likes2vape

Likes2vape

Well-Known Member
So far I’ve washed all the silicone pieces with soap and wate and have wiped them down with iso it’s better but not great. It’s almost charged and I’m going to do a burn off while blowing through the bottom once it’s charged and then try a couple bowls.

Other than the stink it feels very nice in the hand and the magnetic mouthpieces are great idea. Seems like loading it will be a breeze. Excited to try it out but also a little scared with the smell.
 
N

nevermore

New Member
Hey guys, I've heard that solo stem could mod to Tera, but when I search solo stem there's a lot of options. Could you guy point out which one below is matched with Tera plz?
air-001-unit-arizer-air-vaporizer-10.442_71366116-1ae4-4745-8d26-3e5d044cced7_500x500.jpg
 
nevermore,
markez

markez

New Member
Last edited:
Hogni

Hogni

Honi soit qui mal y pense
Got a brand new Tera for testing. Intense Iso washes first. But even after 6 bowls it unbearably tastes and smells. It even stinks cold! Awful taste. I'm done with it. Don't want to try another 5-10 bowls until it perhaps doesn't stink and tastes like burned rubber/brake disc anymore. Never had a device with that kind of intense emissions - really disgusting!
Despite of that it works pretty good, especially with the WPA but I've the impression that temp is overshooting a bit?
 
S

SpudBob

Well-Known Member
Hogni said:
Got a brand new Tera for testing. Intense Iso washes first. But even after 6 bowls it unbearably tastes and smells. It even stinks cold! Awful taste. I'm done with it. Don't want to try another 5-10 bowls until it perhaps doesn't stink and tastes like burned rubber/brake disc anymore. Never had a device with that kind of intense emissions - really disgusting!
Despite of that it works pretty good, especially with the WPA but I've the impression that temp is overshooting a bit?
Click to expand...
Does it do it with, just the WPA??? In other words, use it with the WPA as your mouthpiece. I find the swivel mp, I believe because of the silicone screen holder??? thingy, gives a off taste IMO. Im eliminating the silicone altogether!
 
Hogni

Hogni

Honi soit qui mal y pense
Yep, can "see"(?) the #. What do you need? Wouldn't like to publish the whole serial#

BigJr, I did that but it doesn't really help.

Yesterday a friend of mine, a real flavor chaser, tried it and refused to take the 2nd hit. He said that he never inhaled such a disgusting tasting vapor.
 
S

SpudBob

Well-Known Member
Hogni said:
Yep, can "see"(?) the #. What do you need? Wouldn't like to publish the whole serial#

BigJr, I did that but it doesn't really help.

Yesterday a friend of mine, a real flavor chaser, tried it and refused to take the 2nd hit. He said that he never inhaled such a disgusting tasting vapor.
Click to expand...
Sounds like you must have got a bad unit. Did vapenOOb use it??? If it was off gassing why did he lend it to you? Have not heard of that with the version 3 Tera's. I know mine does not do that.
 
S

SpudBob

Well-Known Member
Hogni said:
As I said it's brand new and was never used before. It wasn't even unboxed.
Click to expand...
You'll have to contact whoever vapenOOb bought it from and get a replacement. Its a P.I.T.A. I know but can be remedied. Ive not heard of any V3 that off gass till now. I have, honestly, not been watching this thread much as of late.
 
You must log in or register to reply here.
Top Bottom