Boundless Tera

E

E0x

Well-Known Member
@Petetbay i think the same about the heat problem and heavy use of the tera , i have 2 tera that i too abuse and both crack the upper part of the chamber to the point of not return:

have you find any solution for use the tera this way ? something to make a air seal with the chamber ? because everything see to work find beside this state.

thanks
 
Petetbay

Petetbay

Well-Known Member
E0x said:
@Petetbay i think the same about the heat problem and heavy use of the tera , i have 2 tera that i too abuse and both crack the upper part of the chamber to the point of not return:

have you find any solution for use the tera this way ? something to make a air seal with the chamber ? because everything see to work find beside this state.

thanks
Click to expand...
I would use concentrate mode with the stock wpa to vape hash, I don’t use concentrate mode or the wpa anymore. The wpa is a heat stink that overheats the plastic even @ 428*F, I’ve made my own wpa from the glass mp mount.
 
BigJr48

BigJr48

Well-Known Member
Petetbay said:
I would use concentrate mode with the stock wpa to vape hash, I don’t use concentrate mode or the wpa anymore. The wpa is a heat stink that overheats the plastic even @ 428*F, I’ve made my own wpa from the glass mp mount.
Click to expand...
Have you tried replacing the o-ring?
 
C

canadianvapelife

Well-Known Member
Just got my tera in the mail. Messing with the wpa and noticed once unscrewed there is a small thread that actually screws into the end of the wpa. Just curious what either of these threads would be for?
 
Boreus

Boreus

Well-Known Member
Personally I find the wpa that comes with it gets too hot too fast. I use a Arizer stem with the rubber gasket. I think it actually vapes better as well as not getting as hot, maybe it gives it a bit better seal or something.
 
Petetbay

Petetbay

Well-Known Member
Boreus said:
Personally I find the wpa that comes with it gets too hot too fast. I use a Arizer stem with the rubber gasket. I think it actually vapes better as well as not getting as hot, maybe it gives it a bit better seal or something.
Click to expand...
I agree the included wpa is garbage and can cause the plastic to crack around the bowl if you run hi temps. I use a 9mm tubed wpa in the glass mp.
 
Last edited:
R1ng0

R1ng0

Well-Known Member
Petetbay said:
Remove the adapter part reverse it and screw it in the end and now a female adapter.
Click to expand...
Theres a good mod i found and i made my own it based on it basically take the short glass adaptor, remove the bottom and the original stem which imho is way too short anyway! Take a standard arizer solo glass fit it inside it fits purrfect, then re-add the bottom of the vap cap and the tera is now my goto vap for water or just straight it completely transformed it.. LOl my stion3edf arse just read the post above which says the same things doh!!!
 
BigJr48

BigJr48

Well-Known Member
R1ng0 said:
Theres a good mod i found and i made my own it based on it basically take the short glass adaptor, remove the bottom and the original stem which imho is way too short anyway! Take a standard arizer solo glass fit it inside it fits purrfect, then re-add the bottom of the vap cap and the tera is now my goto vap for water or just straight it completely transformed it.. LOl my stion3edf arse just read the post above which says the same things doh!!!
Click to expand...
Would love to see pics
 
warren0728

warren0728

Well-Known Member
LesPlenty said:
I like the black plastic Arizer stem I pictured earlier (I need that full bowl), you can even pack the stem with terp balls for more cooling (and cleaning, why I stopped),
View attachment 15233
3D Flow stem mounts the same as above, pushed in through the underside of the Tera magnetic mount, @warren0728 stock pic,
View attachment 15232
Click to expand...
@BigJr48 here is a message from a few pages back showing two different options … the one i use is the bottom pic
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
BigJr48 said:
what size beads in stem?
Click to expand...
3mm rubies, 4mm quartz, and 4.7mm SiC from memory...I stopped using them due to maintenance, easier to just use the DHGate Arizer stems in the picture, I got 6 for $20 yonks ago and cannot find that link, close but dearer,

Osgree Smoking Accessory 70mm Replacement Aroma Tipped Glass Stem For Arizer Solo 2 Air 2 Solo 1 With Mouthpiece Cover From Osgree, $8.33 | DHgate.Com

DHgate.com offers high quality osgree smoking accessory 2pcs 70mm replacement aroma tipped glass stem for arizer solo 2 air 2 solo 1 with mouthpiece cover under the category other smoking accessories with unit price of &price;.
www.dhgate.com

Here is a bundle that will fit and give you options to try,

Osgree Smoking Accessory /Pack Replacement Glass Stem Kit For Arizer Solo 2 Air 2 70mm 110mm Bent Glass Tube From Osgree, $10.40 | DHgate.Com

Wholesale brand osgree smoking accessory 4pcs/pack replacement glass stem kit for arizer solo 2 air 2 70mm 110mm bent glass tube for everyday discount prices on DHgate.com! Best quality and cheapest price!
www.dhgate.com
 
Last edited:
PersonDude

PersonDude

Well-Known Member
I've just recently got a Tera and it's great! I got it on sale and it felt like a steal bc it offered me Starry prices for higher quality, more durable material and more capable right out of the box. it cooks the bud really nice and even and I'm able to get at least 2 good sessions at 220C from one bowl. The only issue I've had so far is that the WPA will get stuck to the stem of a glass bong sometimes. I've noticed that it happens in some bongs more than others.

Do you have a favorite bong to use with the Tera? Lowkey I think a skinnier one might hit better but I'm always down to experiment :D
 
Choices

Choices

Well-Known Member
PersonDude said:
I've just recently got a Tera and it's great! I got it on sale and it felt like a steal bc it offered me Starry prices for higher quality, more durable material and more capable right out of the box. it cooks the bud really nice and even and I'm able to get at least 2 good sessions at 220C from one bowl. The only issue I've had so far is that the WPA will get stuck to the stem of a glass bong sometimes. I've noticed that it happens in some bongs more than others.

Do you have a favorite bong to use with the Tera? Lowkey I think a skinnier one might hit better but I'm always down to experiment :D
Click to expand...
Glad to see another satisfied Tera user! Not to steer you away from using it with a bong but have you tried it with an Arizer Solo glass stem? A bent stem cools things a great deal and is a really easy modification. Enjoy!

Peace....

Choices
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
PersonDude said:
The only issue I've had so far is that the WPA will get stuck to the stem of a glass bong sometimes
Click to expand...
I use the following to fix that problem with any vape,

Hookahs Dropshipping Wholesaler Stevenlmz79 Sells Glass Adapter Hookahs Adpters Smoking Pipe Adapters Oil Rigs Adapters PG5133 | DHgate.Com

glass adapter hookahs adpters smoking pipe adapters oil rigs adapters pg5133 is on sale at a factory price of &price; in stevenlmz79 online store for hookahs on DHgate platform.
www.dhgate.com
They have gotten expensive, found some more cheaper here but only 18mm,

18/18mm Hookahs Glass Bong Adapter With 14mm Carb Bongs Adpters Smoking Pipe Oil Rigs Adapters Male/Female Joint 18.8mm From China Hookahs Seller Newpipes | DHgate.Com

newpipes is widely regarded as one of the best best dropshippers for hookahs, the 18/18mm hookahs glass bong adapter with 14mm carb bongs adpters smoking pipe oil rigs adapters male/female joint 18.8mm could be reachable at a discount price of &price;.
www.dhgate.com

edit, more cheaper version,

Wholesale Best Quality Material 14 And 18.8 Mm Clound Buddy Y Glass Hookah Adapters With Plug Type Carbohydrate Male To Female Connectors For Water Guns And Hookahs | DHgate.Com

DHgate has numerous best quality material 14 and 18.8 mm clound buddy y glass hookah adapters with plug-type carbohydrate male to female connectors for water guns. Wholesale hookahs at DHgate.com right now!
www.dhgate.com
 
Last edited:
E

electroluks

Member
Hey guys, I recently bought the LG H2's for the TERA v3 and it did not recognise them. My nitecore external charger identifies and charges them without issues. Maybe it's my unit (the top part has detached after heavy and long time use with the WPA at higher temps), but the originals batteries still work. Or maybe because they are 20A max current discharge, while the originals are 30A. Also noticed that the inner part of the LG H2 ones has less protuberance, perhaps the top poles are not properly connecting to the TERA. Does anyone use them? I've been thinking of getting the 30A SONY VTC 6 ones.

Bonus: The detach problem has been temporarily solved by my girlfriend's hair elastic (see images below) while I wait my new unit sent by Boundless (thanks for the awesome customer service),

Not good
GOOD
 
electroluks,
  • Like
Reactions: LesPlenty
LesPlenty

LesPlenty

Well-Known Member
Company Rep
electroluks said:
they charged with no problems at my external nitecore
Click to expand...
Even crap knock-offs half full of sand will charge OK, I have a Nitecore SC4 that gives me internal resistance and mAh so you can tell how good the batteries are...even as they age so you know when to chuck them out.
 
LesPlenty,
  • Like
Reactions: BigJr48
J

JimmyS301

New Member
Had my Tera around a week. Picked up from POTV Black Friday sale and love it thus far.
I've got a question about the Concentrate mode. It says it's getting up to 500°f but out of curiosity I did side by side comps of my flower after a 428° session and a 500° session and they are identical. And on a side note after the Concentrate mode session starts the temp countdown if I switch it back to normal mode the temp readings are WAYYY different.
I was told after reaching out to POTV that ".the concentrates mode on the Tera doesn't unlock a secret, higher 'top temperature', it boosts the Tera's temperature to the highest available, 428°F." So if it doesn't go to 500° wth does it display this? Kinda shoddy if this is true. Anyone else have experiences like this with their Tera or any advice?
 
Last edited:
JimmyS301,
  • Like
Reactions: LesPlenty
You must log in or register to reply here.
Top Bottom