little maggie
Well-Known Member
In case anyone is interested, PIU is offering a free water adapter with boundless vapes.
Boundless CF / CFX / CF-Hybrid
- Thread starter smokey_da_vape
- Start date
-
- Tags
- boundless
Woah I just ordered my CF how can I get one? Will it just ship with it?
stickstones
Vapor concierge
That is crazy...get a hold of boundless.
HoochIsCraaaazy
New Member
Does anybody have any ideas on how to get the CFX to work with the MFLB bottle rocket? I don't have any glass pieces but he bottle rocket let me use any glass bottle as a water pipe with the MFLB.
Vapor_Eyes
taste buds
I wish I could help. I get great flavor at 385F. At 420 it's a little toasty/roasted tasting but not bad. Mine is only a week old though.
I ordered some vapexhale ELBs and I have to say the top "hat" screen is a much better solution than the EQ elbow screens. It's the perfect size to pop on the bottom of the mouthpiece once you take the stock screen off. That way you don't have to fuss with it every time you load.
I don't have much of a problem with the stock screen though, it's really close in terms of airflow and I think the clogging isn't as bad as claimed. I brush the stock screen every time I empty the CFX so that might help.
I thought maybe it was getting clogged right before I changed to the ELB screen. It was hard to get off and sticky, but when I looked through the holes they were completely clear, no blockage at all.
YungLeaner
Well-Known Member
Is it electronic/plastic tasting/combustion issue?
If so, then it's probably defective. If not and it's totally cleaned then I'm not sure what the problem could be! The CFX definitely loses taste quickly--i usually have 3-4 super flavorful hits and then the flavor drops off to toasty AVB. But if the flavor is actually gross there's probably a real problem.
Try a looser pack. I find that tightly packed bowls have thicker clouds but worse taste.
Vapor_Eyes
taste buds
I used max temp, 430F.
waxdab23
Well-Known Member
Yup, had the same issue here. Had to do a warm ISO bath to get it unscrewed. Now I twist the cap on only half way to prevent it from happening again.
murf2010
Well-Known Member
Thank you!!
Matters to me because I really enjoy the shatter hits from this device. Gets hot tho!!!
Ineedmedicine
Member
I'm interested but I don't quite understand. Do you remove the stock mouthpiece screen? Where does the material go?
Vapor_Eyes
taste buds
I should have explained better. You take off the standard mouthpiece screen. Then you place the top "hat" screen from a Vapexhale easy load basket (ELB) and put it over the mound where the old screen was. It's almost a perfect fit, I nudged the sides in with a dab tool and now it fits flush, if you didn't know better you would think it could be the stock screen. Here's a picture from @BuzzDanklin
@Meach @Putricio Great suggestion on the ELB cap it fits surprisingly well when you remove the stock screen! It flows just as well as a freshly cleaned stock screen, and the airflow stays good much longer than the stock screen w/o cleaning. I also tried it with the Flowermate cans, and they are slightly too small, so they don't make contact with the sides.
Ineedmedicine
Member
Sweet! Ok, makes sense. Does the material go in the chamber like designed? Or do you fill the bottom of the ELB?
YungLeaner
Well-Known Member
Vapor_Eyes
taste buds
I don't use the bottom at all. Some people fill the bottom of the ELB and put it in the chamber, it's supposed to make it more convective, improving flavor. I'll try it out sooner or later. It seems like more trouble than it's worth to me.
That's just me. I'm a lazy vaper. I don't want to mess with anything more than I need to, especially with a portable, and especially when I'm high. I prefer the stock screen over the EQ elbow screen for this reason.
It can be a little difficult getting that elbow screen out, not to mention it is hot right after a bowl so if you want to repack another one right away you have to deal with this hot screen and find somewhere to put it. Not the best idea for a portable in my opinion. I can't imagine doing that at a concert for example. Even in a car it would be a hassle, the screen could fall between the seats, etc etc.
The Vapexhale ELBs are the best of both worlds, they stay secure on the mouthpiece even with a vigorous brushing, and they do provide slightly better airflow and are less prone to clogging.
RelaxedNow
Well-Known Member
Most of the time, I use it at 365F, and dump the bowl rather than cranking it up, never going higher than 380 these days. I think the bottom line is that each person has to just find a temp they like with their specific device, no matter the model, and go with that. After all, I think we'd agree that there is no consistency in design between the various models, and I suppose even two of the same model could vary a bit.
In any event, I'm gonna think that way, because I'm enjoying my CFX too much to complain. Besides, at this moment, I'm at a beach house on the Washington State coast. Been doing a lot of beach and community strolling today, and now I'm listening to some mellow tunes while sitting in the sun room, so there ain't nothing negative happening near me or my thoughts (except for the preceding double negative). It's all good.
Ineedmedicine
Member
Thanks for the info!!
HoochIsCraaaazy
New Member
Has anybody used Kief in this yet? Would it work best by putting some ground bud in first, then Kief on top?
Andrew26
Happy Dabber
Damn I haven't checked this thread since I first got my CFX like 3 weeks ago and it's been crazy active! Iv been up up in them vape clouds 
Just read about 25 pages to catch up lol
I'm happy to report iv had nothing but good experiences with it so far, sucks to hear some people have been experiencing defects with their units!
I'm hoping boundless has a way better defect rate than S&B. Time shall tell
Happy to hear that PIU sent me a free WPA for my cfx
their customer service is awesome and I'll always do buisness with them!
Crazy to hear Boundless is coming out with the new CFV sometime in the fall I think, hopefully it'll be around the same price as the cfx as I will pre order one for sure!
I should have my WPA in my mailbox tomorrow
Just read about 25 pages to catch up lol
I'm happy to report iv had nothing but good experiences with it so far, sucks to hear some people have been experiencing defects with their units!I'm hoping boundless has a way better defect rate than S&B. Time shall tell
Happy to hear that PIU sent me a free WPA for my cfx
their customer service is awesome and I'll always do buisness with them! Crazy to hear Boundless is coming out with the new CFV sometime in the fall I think, hopefully it'll be around the same price as the cfx as I will pre order one for sure!
I should have my WPA in my mailbox tomorrow
little maggie
Well-Known Member
Write to Randy about the water adaptor- I got an email from PIU saying it was free. As for using the MFLB bottle rocket I'm not sure. But the orbiter works fine with the CF once you remove the top.
waxdab23
Well-Known Member
Hmmm I don't think so. I've gone two consecutive 5 minute sessions at 400ish and haven't had a hot mouthpiece.