HoochIsCraaaazy
New Member
I bought my CFX from PIU last weekend, do I qualify for the free WPA?
Boundless CF / CFX / CF-Hybrid
- Thread starter smokey_da_vape
- Start date
-
- Tags
- boundless
HoochIsCraaaazy
New Member
Any news on if we can get a firmware update on existing CFX's to allow the screen to be turned off?
murf2010
Well-Known Member
djchexxx
Well-Known Member
I think my favorite would have to be the Grasshopper out of all of them despite the quirks. I would have to say the CFX comes in 2nd. I'm thinking of picking up a lotus sometime in the near future and maybe an evo down the line. I would love to try out the Mighty but I cry a little inside every time I look at the price. I just can't justify it yet though I have been thinking about it for a while. Do you have a Mighty? @murf2010
Last edited:
The promotion for the free WPA was for those who purchased from our website on or before 4/20/16, my apologies. They will be up on the website soon for purchase.
We are still working on getting the CFX a stealth mode but likely will not be ready for a few months.
murf2010
Well-Known Member
HoochIsCraaaazy
New Member
Thanks for the quick reply.
Two other questions. Does the mouth piece click into place, or is it more free spinning? Mine free spins and I just want to make sure that's normal.
Also, does the unit work best with leaving herb loose in the chamber or should you pack it down?
Essentially turning off the screen while the device is still powered on. As of right now there is not a way to dim or shut the screen off while the device is running and we are working on a "stealth mode" to solve this concern. The CFX is harder to work with electronically which is why we were able to get the updates to the CF much quicker than the CFX.
HoochIsCraaaazy
New Member
Puff it up included an Arizer screen pack. It has two small caps and two flat mesh circles. I've seen the mods on Reddit using the easy load bowls, but they all show a long bowl and this is small.
Are people using the Arizer screens on this? If not, I'm not sure why PIU included them.
Are people using the Arizer screens on this? If not, I'm not sure why PIU included them.
djchexxx
Well-Known Member
Yes, I switched out the bottom stock screen with a different screen for more air flow and also replaced the cap screen on the mouthpiece
jonnywinner
Well-Known Member
@Boundless Vape Technology - It's awesome how quickly you respond to feedback from customers and actually make and implement changes to improve your vapes. But it's a bummer b/c my new CF just arrived today (free and fast from PIU! - still in the sealed box ... though I'm doing a burnoff on my new CFX as I type). Will the changes be able to be downloaded to the CF somehow? I'd really like to have a battery indicator and stealth mode on my CF. Thanks!
TheStruggle
New Member
I'm really excited to try mine because the only vaporizer I've ever used is a knock-off Pax 2. Needless to say it sucked big time. Lol
The top of the mouthpiece is free spinning but the base should only turn enough to unlock from the vape, not spin freely. Maybe email me some pics at Eric@bndlsvapes.com and I can take a look at it for you.
Personally I prefer the looser packed bowls.
As of right now the updates are not downloadable but we are working on a program for those to upgrade. I will have more information on this in the next few days. My apologies.
HoochIsCraaaazy
New Member
This thing is awesome. I thought I got some really crappy herb because I wasn't feeling much for the past two weeks with MFLB. Same herb in the CFX tonight worked like a charm.
Are both of those changes for increased air flow only or other benefits also? Are you using the easy load bowls also?
Last edited by a moderator:
murf2010
Well-Known Member
QUESTIONS:
How do you "burnoff"?
How do you load the bowl? tamp or no?
Which charger is better to use or is it personal preference?
Device just came and I'm charging it with wall charger not USB.
Also can someone explain how to use the screen provided? There are domed and flat and I'm just confused
How do you "burnoff"?
How do you load the bowl? tamp or no?
Which charger is better to use or is it personal preference?
Device just came and I'm charging it with wall charger not USB.
Also can someone explain how to use the screen provided? There are domed and flat and I'm just confused
Last edited:
subway13029
Well-Known Member
Take off mouthpiece screen and use the arizer basket essentially in its place but it will just cap your load (basically sit on top of your herb) and the flat screen is to replace the foil looking screen in the bottom of the chamber(underneath where your herb would be) people have been using the longer elb to actually pack their herb inside of..it's a tight fit with those and no real benefit imho...so there ya go..make sure to remove the stock mp screen as it's got tiny holes and gets clogged fast.
murf2010
Well-Known Member
I don't get it. I unscrewed the original screen to the mouth piece and i have no idea how the domed screen is supposed to fit back on in its place? or do you shove it into the bowl? on page 19 it looks like the guy fit his on the mouthpiece did he use glue? mine don't just fit on, there is nothing for it to connect to.
Last edited:
subway13029
Well-Known Member
Mine doesn't connect to the mp either..I just plop into bowl after I pack..it's perfect fit..its main purpose is so bits of herb don't go into your mouth...ala the Original screen that would get clogged.
murf2010
Well-Known Member
Look on page 19 and see what I was talking about
namasteIII
Well-Known Member
He's using an ELB, From Vape Exhale. Same thing as the Arizer one you have, I guess their a little different size. Maybe just a tad smaller so that will actually stick to the MP unlike yours.
Likes2vape
Well-Known Member
I have to give props to the crew @Boundless Vape Technology their customer service is top notch!!
Last week my CFX just quit working. I contacted them about the warranty process around 8pm and was sent a return shipping label the next morning. I ended up having an appointment down the street from them on Mon so I asked if I could just bring the unit by. They said no problem and that the whole staff was going to be there.
I stopped by Monday around noon and was greeted by Eric. He took a look at the vape and went and got me a new one and a WPA. I also picked up the CF. Afterwards he introduced me to everyone and we did sesh since we are all patients. We used the CF with the wpa and it kicks ass just like the CFX maybe even a little better since the CF has about an inch shorter air path.
I'm so glad that I have the cf/cfx back. I really missed my CFX when it went down and that's why I picked up the CF as a back up. It's really an awesome vape at a great price from a company that actually cares about their customers.
I can't wait until they have their full convection vape out I'm sure it'll be awesome!! Hopefully by July we should know mire!!
Last week my CFX just quit working. I contacted them about the warranty process around 8pm and was sent a return shipping label the next morning. I ended up having an appointment down the street from them on Mon so I asked if I could just bring the unit by. They said no problem and that the whole staff was going to be there.
I stopped by Monday around noon and was greeted by Eric. He took a look at the vape and went and got me a new one and a WPA. I also picked up the CF. Afterwards he introduced me to everyone and we did sesh since we are all patients. We used the CF with the wpa and it kicks ass just like the CFX maybe even a little better since the CF has about an inch shorter air path.
I'm so glad that I have the cf/cfx back. I really missed my CFX when it went down and that's why I picked up the CF as a back up. It's really an awesome vape at a great price from a company that actually cares about their customers.
I can't wait until they have their full convection vape out I'm sure it'll be awesome!! Hopefully by July we should know mire!!
stickstones
Vapor concierge
You may be building up what I call a 'signature tolerance' to Herbie. You can switch to a different vape for a few days or a week and get blasted by the new one. Then when you go back to Herbie your face will melt again.
I've noticed on occasion my unit will do something like this, but it's not consistent. If yours does it a lot I would contact Boundless to see if it is defective. If it's once in a while and the unit works fine otherwise, like mine does, I wouldn't sweat it. but that's up to you...