AVS m22

[al bundy]

The M22 on sale for $127 with code M15 for the OG Mole and the M22 that’s 15%!off

Code CM35 fir 35% off all spools and coils

 

[tennisguru1]

It's almost ready for prime time! :>)
1 second ago
Beautiful , simply beautiful, very impressive. :>) Medicating with CBD will never be the same again. No more coughing, just smooth medicated vapor. Pure self heating revolutionary SIC dish !!!


REPLY

 

[anasrzi]

What's the code and where do you put it @al bundy for the m22? Is it after the age verification part? Looking to get a m22 soon so a discount could be very handy .

 

[al bundy]

I think when you check out there’s a box for it.
Haven’t had the Age verification yet
That’s new

 

[sarkunit]

I think when you check out there’s a box for it.
Haven’t had the Age verification yet
That’s new

If you don't mind me asking, what type of age verification? I recently went to make a purchase from Divine tribe and was asked for a ID photo for age verification. Is this similar? I am afraid I will no longer be able to purchase things online, because in this age of information I will not hand a copy of my license over to a third party verification system. My click of consent is enough to watch hard core porn, but I cannot buy a expensive niche medical CBD device that saves my health? I am honestly quite bummed if that is the case.

 

[buckhakeesah]

If you don't mind me asking, what type of age verification? I recently went to make a purchase from Divine tribe and was asked for a ID photo for age verification. Is this similar? I am afraid I will no longer be able to purchase things online, because in this age of information I will not hand a copy of my license over to a third party verification system. My click of consent is enough to watch hard core porn, but I cannot buy a expensive niche medical CBD device that saves my health? I am honestly quite bummed if that is the case.

That's odd. They never asked for a photo ID for me when I ordered. It just asked what your birth date is and then you could proceed to payment.

 

[sarkunit]

That's odd. They never asked for a photo ID for me when I ordered. It just asked what your birth date is and then you could proceed to payment.

Great news for me! It was the Divine Tribe site that I had the issue with, so perhaps they ship under different laws or DT had some recent trouble with underage vaporization? In any case, I am glad my bank account, business address, and signed affidavit of age is sufficient for AVS for now. I need a new portable because I have started outdoor exercise in the form of hiking, and want something for the wind down while my wife drives me home

 

[al bundy]

Just tried it
They ask
Birthday
First Last name
Address hit continue and that was it
Said proceed to pay...

 

[anasrzi]

Just tried it
They ask
Birthday
First Last name
Address hit continue and that was it
Said proceed to pay...

Sounds easy enough I've not gone past the age verification screen. What exactly did you type in for the discount @al bundy ? Any discount codes that work I'll try as it's a serious amount of money for atomiser, although it's going to be a worth while investment.

 

[al bundy]

Code M15
for both O G Molecule and M 22

Code CM 35
for all coils and spoils

 

[mephisto]

So much for waiting on this new Sic dish for the M22 (and the temp controlled mod). As we know the clips will not hold the legs with enough tension to allow proper/stable resistance. I have seen pics of the Sic dish sitting inside the ceramic cup. This is not possible with the M22 I have as the holes in the deck are too small. And forget about using the metal flat coil, there is not a fucking allen wrench on the face of the planet that will mesh correctly with the screws that hold the coils. Beta my ass! I got all jacked up for this potential to use extracts on a temp controlled, Sic platform and zilch! The whole goddamn jar of coils, screws, clips, and ESCC (woo-hoo!) just went into the fucking trash! $130 for a mismatched bunch of shit. Fuck what is going on on Reddit, because I have not....

 

[anasrzi]

Thought @Shit Snacks had your unopened unit @abracadaver, did you buy two beta's? Sure AVS will help you out if the fittings aren't right even if it is a beta unit we're dealing with. Looks like the m22 is nearing completion given what's happening on Reddit, im following the progress closely as I hope to snag a beta unit before the predicted price increase and so I'd get the updated SiC dish too.

 

[mephisto]

He does, I did. Going back to a torch! Tired of hype and videos of shit that ain't available.
I really should know better at my age! I don't have the patience or interest of building a vape,
or rebuilding a coil deck. Thats what I pay the retail guys to do.

 

[Shit Snacks]

He does, I did. Going back to a torch! Tired of hype and videos of shit that ain't available.
I really should know better at my age! I don't have the patience or interest of building a vape,
or rebuilding a coil deck. Thats what I pay the retail guys to do.

Sorry to hear the trouble my dude, mine remains unopened and will probably end up gifted to another FC member sounds like...

 

[mephisto]

I meant to share the goodness, as you know. Frustrated by useless gear.

 

[Shit Snacks]

I meant to share the goodness, as you know. Frustrated by useless gear.

Of course, you generous gent! And I'm still very appreciative. Concentrates just a stretch for me

 

[Omphaloskeptic]

I have seen pics of the Sic dish sitting inside the ceramic cup. This is not possible with the M22 I have as the holes in the deck are too small. And forget about using the metal flat coil, there is not a fucking allen wrench on the face of the planet that will mesh correctly with the screws that hold the coils

Just got mine, haven't tried it out yet but those are T5 torx head screws and not allen head. There should be two ceramic housings in the box with different sized post holes, one for the ESCC (larger holes) and one for coils. The deck itself has two sets of holes. One will fit the clips while the other has the above-mentioned screws for the coil. I'm getting 1.50-1.55 Ohms resistance repeatedly with disassembly/reassembly. High but stable. Hope that helps!

 

[mephisto]

Thanks for the reference, there was only 1 ceramic shell in my box. The holes in it are too small to
permit the legs of the SS coil to fit through properly. Time is short, don't want to be wasting it on
wait and see. I have a different vape I can do that with.....Hope it all goes well for the B team.

 

[Omphaloskeptic]

I have a different vape I can do that with

Yeah, I have a grasshopper too. I feel your pain!

 

[al bundy]

Got tracking for bubbler this morning.
Just need the updated parts and mod.

 

[LesPlenty]

Should be ready for Xmas...next year.

 

[Deleted Member 1643]

Haven't used the m22 much since the early release fiasco. Bubbler and replacement ceramic cup arrived the other day. Out-of-the-box, the new gear delivered a surprisingly strong hit, much like the m15. Even inspired the maximum surface area coil above.

The bubbler is a big improvement over the Poseidon bubblers - narrow profile and flat bottom make it more stable. 14mm male GonG fitting is more versatile. Four holes in the downstream provide diffusion - not enough, IMO, but better than nothing. And of course, the vortex carb cap.

Packing slip said to expect the new ESCC in two weeks.

 

[al bundy]

Nice
Mine tomorrow since the M22 top fits the Sai I’ll be trying that.
I need one white o ring fir the 22 one flew off somehow

 

[710yota]

I got my bubbler a few a days ago and have been digging it, makes it very easy to take some big rips with the ESCC. I'd say my experience is in line with accept, big improvement over the Poseidon but could use a bit more diffusion, I like my bubblers a bit more bubbly . For me the bubbler is more just to tide me over till we get some attachments for bigger glass

 

[al bundy]

Got mine also new orings ,new screwdriver ,new dish for coil
The coil fits in the new dish ,no coil mod needed

But it works nice on the SAI TAF on a Sinous p80
Put a quarter on table and you could set the p80 on the quarter and both the bubbler and p80 sit up great.

I see on the AVS site they added the ESCC dish but no stock yet and no price.and a bumper set for bubbler
Curious of the price on the replacement ESCC
Supposed to get the new ESCC and clips in two weeks,we’ll see