Mribisback_
Well-Known Member
That's a realeaux rx75. Might be difficult to find nowadays.
@Pipes posted a 21700 near the top of this page.
510 DIY dry herb vape
- Thread starter PPN
- Start date
@Pipes posted a 21700 near the top of this page.
kokolokokolokon
Well-Known Member
thanks a lot!
Actually, since i had a problem with a device i bought on a online shop i will get a new mod from them. I told them to get a single 21700 battery at the same price range of the faulty vape.
They offered me some nice models. Im between the themala solo and the aegis max 2 (they also offered me a themala dna if i pay another 56€ but i dont know if i can afford it right now)
what do you think?
after a dreamwood glow i think the 10 seconds hit limites isnt a concern...
Great thread. Here is my personal build if it’s okay if I hop in also
ibb.co
ibb.co
I’ve moved the coil around a bit so the wire wasn’t touching itself any where and had to center it a little bit more. The inside of the body is line with SS and it’s a pretty tight fit for the coil being surrounded by SS but fits like a glove and works like a charm in TC. Resistance is .240 with 20g 316l ss
AE7-F121-C-7051-40-E6-8-DCC-CA7-E944-E5098 hosted at ImgBB
Image AE7-F121-C-7051-40-E6-8-DCC-CA7-E944-E5098 hosted in ImgBB
F97-EB384-DD1-E-4-B27-99-E1-ED07-E2-D9-A8-BE hosted at ImgBB
Image F97-EB384-DD1-E-4-B27-99-E1-ED07-E2-D9-A8-BE hosted in ImgBB
I’ve moved the coil around a bit so the wire wasn’t touching itself any where and had to center it a little bit more. The inside of the body is line with SS and it’s a pretty tight fit for the coil being surrounded by SS but fits like a glove and works like a charm in TC. Resistance is .240 with 20g 316l ss
Razhumikin
Well-Known Member
Im glad you got that working in TC! What tcr value did you end up on?Great thread. Here is my personal build if it’s okay if I hop in also
AE7-F121-C-7051-40-E6-8-DCC-CA7-E944-E5098 hosted at ImgBB
Image AE7-F121-C-7051-40-E6-8-DCC-CA7-E944-E5098 hosted in ImgBB
F97-EB384-DD1-E-4-B27-99-E1-ED07-E2-D9-A8-BE hosted at ImgBB
Image F97-EB384-DD1-E-4-B27-99-E1-ED07-E2-D9-A8-BE hosted in ImgBB
I’ve moved the coil around a bit so the wire wasn’t touching itself any where and had to center it a little bit more. The inside of the body is line with SS and it’s a pretty tight fit for the coil being surrounded by SS but fits like a glove and works like a charm in TC. Resistance is .240 with 20g 316l ss
Ah I had a heck of time getting AF dialed in. I was getting okay results but didn’t find the sweet spot again until I got a Tubo able mod.
XpeeN
Well-Known Member
Don't forget to use PI values, it's a game changer imo
I did a bit of research on the Pi values for tc. I would have dug deeper if this mod didn’t make it here. I just enjoy how much longer tubo will autofire for vs AF.
XpeeN
Well-Known Member
Why do you find it necessary to autofire more than 30 secs with this heater? I found the 30 secs autofire with a similar heater perfect for me. I'd highly recommend you to start with p=700, i=90 or p=800,i=~100 if you have another mod with AF on it.
Last edited:
I usually click on and warm up in cruise so I don’t glow the coils or risk them glowing and by time I load a bowl it’s up to heat then I just let her run while I load a few bowls without clicking or worrying about it turning off, just one less thing I have to think about as much . I also prefer tubo for Zenith because of longer autofire.
XpeeN
Well-Known Member
Yeah, understandable for the Zenith for sure. I'm kinda paranoid about my glow's wood to keep the coil warm unnecessarily XD, but I guess it won't do much damage if it's not glowing.
Ah, yeah during the building process I only had issues with wood when glowing for long periods of time while my old mod was dying and doing some crazy stuff. I lined the inside of 510 with SS to protect it more and make the heat a bit more efficient and haven’t had any issues with long run times. Sometimes I will autofire 3 times in tubo in a single sesh
XpeeN
Well-Known Member
wdym by "lined the inside of 510 with SS" ?
And I hope you read my edit to my 1st comment, I think I edited it too late for you to notice
And well, another reason to switch my glow's stock coils. it runs too well on wattage that I didn't really find a reason to build new coils. But if it'll help me protect the wood, SS coils here I come XD
I do have another. Thanks for notice I did not see the changes I will try it on my Rim C. My coil is SS but the SS liner im referring too it’s s 1mm thick SS foil rolled and fitted into the inside of the wood body so my coils can’t directly heat the wood body, acts a buffer and makes the heat a bit more efficient. My coil maybe has a couple mm of space between it and the SS lined walls.wdym by "lined the inside of 510 with SS" ?
And I hope you read my edit to my 1st comment, I think I edited it too late for you to notice
And well, another reason to switch my glow's stock coils. it runs too well on wattage that I didn't really find a reason to build new coils. But if it'll help me protect the wood, SS coils here I come XD
XpeeN
Well-Known Member
Interesting, All I have available here is aluminum foil, but I'll get some from AliExpress or something.
The PI basically forces the TCR to ditch the All-or-nothing behavior in regard to shooting watts, and make it shoot watts relatively to how much is needed to reach the max resistance (that you set via a TCR value).
Ah that makes more sense and that was a gripe of mine is when it would need to heat up it was trying hard. I did find a few that worked okay without Pi, definitely gonna need to try it though