Arizer Solo 3

D

deadsouthernblake

Well-Known Member
I've also noticed something being a little off or whatever with the buttons. So far I've only really noticed it with just with one function when trying to reduce the temperature. I'll have to release and repress and hold a couple of times before it will start decreasing the temp. I've also wondering about it running a little hotter than the temperature it's displaying. I know the other night I was getting some fairly thick clouds on 330 F. and cranked up to 380/385 F was hitting more like it was 400 F. But overall I'm really digging the vape just gonna take a little time to get everything dialed in on like I want.
 
TigoleBitties

TigoleBitties

Big and Bouncy
deadsouthernblake said:
I've also noticed something being a little off or whatever with the buttons. So far I've only really noticed it with just with one function when trying to reduce the temperature. I'll have to release and repress and hold a couple of times before it will start decreasing the temp. I've also wondering about it running a little hotter than the temperature it's displaying. I know the other night I was getting some fairly thick clouds on 330 F. and cranked up to 380/385 F was hitting more like it was 400 F. But overall I'm really digging the vape just gonna take a little time to get everything dialed in on like I want.
Click to expand...
Sometimes I feel that the vape's "operating system" goes into a sort of sleep mode when there's been no input for a while and you'll need to hit the buttons a couple of times. The first button press or couple of presses "wakes" the system up and then it detects other button presses normally 🤷‍♂️. Just a guess.

My presets are 338, 358 and 378F so it sounds similar to what you're seeing.
 
S

Sativasforpresident

Well-Known Member
Hey, anyone knows where I can find (or someone makes) a high flow XL beaded cooling mouthpiece in the UK? Looks like there's none unfortunately (in US you guys are spoiled). Been looking for this for a while... Already have jhooks and bong setups but looking for a simple mouthpiece...
Thanks
 
Sativasforpresident,
Rodney

Rodney

Well-Known Member
Sativasforpresident said:
Hey, anyone knows where I can find (or someone makes) a high flow XL beaded cooling mouthpiece in the UK? Looks like there's none unfortunately (in US you guys are spoiled). Been looking for this for a while... Already have jhooks and bong setups but looking for a simple mouthpiece...
Thanks
Click to expand...

recommendedvapesupplies.co.uk

Solo 3 XL Cooling Aroma Tubes

We've made some upgraded Cooling Aroma Tubes with XL herb chambers for the Solo 3 to help reduce the heat from the vapor and provide a smoother feeling on the throat than the originals. Available in Mesh and Glass Screen variants and Dimpled or 10 BB Ruby ball cooling stems.
recommendedvapesupplies.co.uk recommendedvapesupplies.co.uk

But the guy who runs the site is in hospital and wont be back at end of month.

The ones with the balls are sold out but the dimpled ones work just as good. I have one and recommend you get the one with the glass screen and use a mesh screen as the one with the mesh screen is a pain to fit when it gets clogged.

I buy these and cut them down a little.


I tried using it with just the glass and no screen and it all clogged and was not good experience and the screens are easy to put in and just throw away. You can get packets of the screens in 100s from amazon for so cheap.

You probably already knew this but just saying :)
 
Last edited:
Rodney,
  • Like
Reactions: Petetbay
S

Sativasforpresident

Well-Known Member
Rodney said:
recommendedvapesupplies.co.uk

Solo 3 XL Cooling Aroma Tubes

We've made some upgraded Cooling Aroma Tubes with XL herb chambers for the Solo 3 to help reduce the heat from the vapor and provide a smoother feeling on the throat than the originals. Available in Mesh and Glass Screen variants and Dimpled or 10 BB Ruby ball cooling stems.
recommendedvapesupplies.co.uk recommendedvapesupplies.co.uk

But the guy who runs the site is in hospital and wont be back at end of month.

The ones with the balls are sold out but the dimpled ones work just as good. I have one and recommend you get the one with the glass screen and use a mesh screen as the one with the mesh screen is a pain to fit when it gets clogged.

I buy these and cut them down a little.


I tried using it with just the glass and no screen and it all clogged and was not good experience and the screens are easy to put in and just throw away. You can get packets of the screens in 100s from amazon for so cheap.

You probably already knew this but just saying :)
Click to expand...
Thank you so much, yeah I know the site, have ordered quite a few bits from Matt. I would like more beads if possible just like the 420edc ones but without the big postage fee...
Ideally and alternatively I was looking for a FEMALE 18 mm STRAIGHT beaded or dimpled mouthpiece to add on top of the XL mesh WPA.
Yet to find that too... Give me a shout if you have a dhgate link for that anyone!
Thank you!!!

TigoleBitties said:
Yup. I think https://www.420edc.com/ has them as well.
Click to expand...
Thanks man, postage quite a pain from UK though. Anyway, I just wanted to say a big THANK YOU to you personally as a lot of your posts for the arizer solo 3 have got me to enjoying it so much, particularly with regards to jhooks set ups (read them and it convinced me to buy it haha).
 
BlazeDis

BlazeDis

Well-Known Member
Sativasforpresident said:
Thank you so much, yeah I know the site, have ordered quite a few bits from Matt. I would like more beads if possible just like the 420edc ones but without the big postage fee...
Ideally and alternatively I was looking for a FEMALE 18 mm STRAIGHT beaded or dimpled mouthpiece to add on top of the XL mesh WPA.
Yet to find that too... Give me a shout if you have a dhgate link for that anyone!
Thank you!!!


Thanks man, postage quite a pain from UK though. Anyway, I just wanted to say a big THANK YOU to you personally as a lot of your posts for the arizer solo 3 have got me to enjoying it so much, particularly with regards to jhooks set ups (read them and it convinced me to buy it haha).
Click to expand...
Now that’s a serious postage price for those backspacers from @420edc I can’t justify that really . Shame though as they look great .
 
BlazeDis,
D

deadsouthernblake

Well-Known Member
So on two or three of the reviews that 'd watched / read on the Solo 3 said something about the powerful heater along with the hybrid conduction and convection heating it will produce a really stone-y vibe. I would assume that would have more to do with the strain you are using and it's effects than it would using a certain vaporizer. I don't know if it's just that thought subconsciously rolling around in the back of my mind or what but I swear a few times I've felt like I about had the nods after a couple of sessions. Has anyone else noticed a somewhat more than usual stoney type effects with the Solo 3 vs loading up another device from the same batch?
 
deadsouthernblake,
  • Like
Reactions: KindBuddyBud
C

chillAtGVC

Well-Known Member
The Dead South fan?

From my experience, limited as it is, the hotter (visually darker) you get the bud, the more prominent the stoney effect is. And conduction seems to do this more than convection. I have a couple (mostly) pure convection devices and the bud ends up much lighter than the conduction and convection devices that I also have. I think that is what the difference is. Other than that, it would have to be the strain.
 
KindBuddyBud

KindBuddyBud

Well-Known Member
deadsouthernblake said:
So on two or three of the reviews that 'd watched / read on the Solo 3 said something about the powerful heater along with the hybrid conduction and convection heating it will produce a really stone-y vibe. I would assume that would have more to do with the strain you are using and it's effects than it would using a certain vaporizer. I don't know if it's just that thought subconsciously rolling around in the back of my mind or what but I swear a few times I've felt like I about had the nods after a couple of sessions. Has anyone else noticed a somewhat more than usual stoney type effects with the Solo 3 vs loading up another device from the same batch?
Click to expand...
✋ I do, and I like it. I like that I can reel it in too. So say, sativa / hybrid in the morning @350° - 375° F. Need it a little heavier 390° or so. Evening, indica time 400° - 420° nighty night. And the wpa’s are a nice touch. Drop it in a j hook and run it a lil hotter, good to go. I like that I can use it in bed as well.
 
KindBuddyBud,
You must log in or register to reply here.
Top Bottom