Vapman

LowerBridge

Member
Just 3D printed some Vapman click filling aids. Found the model at MakerWorld, thanks bangermikez if you're around 😎

6a20b2cf-1825-440d-9454-61e4184a26ee-1.jpg
 

Dr. G

Vapman Collector Vapman Beta Tester
Appreciation post time - not just for the product but for the company. I'm a lightweight and so I've always been on the lookout for the perfect little micro doser. I picked up the Click up on a whim about a month ago and fell in love immediately; the aesthetic, the ritual, the dose control, etc

But then tragedy - my dumb ass knocked my unit off my kitchen counter and it hit the ground just right so center pin bent loose and came off. I submitted a message via the form on their website and they got back to me within a day. Even though they didn't currently have any replacement heating units in their US warehouse they went out of their way to get me back to microdosing like a champ again.

So shoutout to David and Michael for their customer service. Night and day compared to some other companies I've dealt with (looking at you, Grasshopper). Now I should probably support them by buying a backup unit...
Greetings, I support them all the time...I remember that they are a small great company. Michael and David are men of integrity and will always make the customer happy...and the same with Master Rene Balli the creator of the original Vapman OG...you will not find this kind of quality in people very frequently. I find myself very grateful to have found the Vapman...

Cheers everyone!
DrG

PS The Rogue Wax Works still has a few of the Mouthpieces left...the acrylic ones are fabulous to use with a water bong and also, it reduces the heat quite a bit. He has a few attractive ones left. Pick up one of these before they are all gone... www.theroguewaxworks.com
 
Last edited:

Grass Yes

Yes
Staff member

Is this mouthpiece compatible with the Click? And what's the general rule on accessory compatibility?
It's a 2.0 mouthpiece, so it is compatible with the click.
 

Hagbard

How Soon Is Now?
build my first click in screens into an OG mouthpiece! had an old one laying around that was pretty much a spare but was beaten up so this was the perfect material for the first prototype 😊

i used 1.5mm x 5mm zylindrical metal pins and a 1.4mm fine driller.

i am not very good when it comes to being talented with building or crafting but i am very happy with the result.





 

Robthebob

Member
If anyone is looking for a small bag for their Vapman, this one fits a Vapman (without the egg), the Vapman lighter, a small jar of herb, and there's also a small side pocket for a mouthpiece, filling aid, etc.
Nice Weekend ✌️
 

Kozzmozz

Infinite realities, infinite possibilities
build my first click in screens into an OG mouthpiece! had an old one laying around that was pretty much a spare but was beaten up so this was the perfect material for the first prototype 😊

i used 1.5mm x 5mm zylindrical metal pins and a 1.4mm fine driller.

i am not very good when it comes to being talented with building or crafting but i am very happy with the result.





This is fantastic! Nice jig you made there
 

blazeitngrazeit

*sad violin*
Hello all, I am wondering if anyone has had their Click fall apart yet? The center pin on mine snapped near the base.

customer service asked me how I thought about a 50% discount, I think lots of lovely things about that but that's not worth a damn because they never actually sent me a discount code.

I really like this device so I went ahead and bought a replacement, I am a vocalist with severe allergies and this vape is the easiest on my lungs. I had already given customer service a week to reply to me, so I gave up.

I'm not even posting this as a negative review, I just wanted to see if anyone else has had a similar experience either with their vape falling apart or with customer service ghosting them.

I feel like I did something wrong here but I have no idea what. I'm autistic too which throws a huge wrench into this for me. Was I supposed to know what to do next, with no code or reply? No discount was applied to my replacement order, either. Maybe I should have written a note or something, but I'm deathly afraid of being obnoxious. But I'm also broke from vet bills 🤦‍♀ so a discount would have really helped me out!

It's definitely a frustrating experience and I'd also like to warn you that the center pin is DELICATE on the Click.

Otherwise, I'm SO IMPRESSED with the Click and it's been such a drag to use my dynavap and launch box till my replacement gets here. Launch box passes the reach test better than the dynavap because the wood reminds me of the vapman lol.

Sorry to insert myself like this but I hate Reddit so much, take care everyone! If I figure out how to post a picture (I can be a bit of a Luddite), I will post a couple pics of my fubar Click.
 

Grass Yes

Yes
Staff member
Hello all, I am wondering if anyone has had their Click fall apart yet? The center pin on mine snapped near the base.
This is a problem with the Click that a few people here have experienced. The pole itself is thinner than in other vapman models and seems more susceptible to this:

Has anyone else experienced a problem where the middle stake in the bowl that connects to the midsection is slightly bent, such that the connection can't be easily made?

I actually dropped my Cherry click onto a rug from about half a metre. It seemed to bend the centre post. To be honest it was a tiny drop so I wasnt sure if the drop did this or it was like this already. Perhaps the heating and twisting also puts a strain on the post?

But then tragedy - my dumb ass knocked my unit off my kitchen counter and it hit the ground just right so center pin bent loose and came off.
 

Hagbard

How Soon Is Now?
This is a problem with the Click that a few people here have experienced. The pole itself is thinner than in other vapman models and seems more susceptible to this:
i won't say that it is a problem with the click but more with the user dropping their units... i mean its a fragile part and dropping the units from a height is never a good idea
 

AshJiro

Member
I had also a problem of bending pin and didn't let the vapman click drop! While i was vaping I had decided to open the airflow because the mouthpiece was getting a bit hot but it was hard to turn and the whole body mooved just a little so when I opened it I saw the pin was a little bent . I managed to redress it but now I get the impression that the vapman's body is decentred and the airflow is less restrictive but still functional. This is my 1st vapman so now I prefer not to touch the airflow.
 

hotmeals

Serial vapist
I had also a problem of bending pin and didn't let the vapman click drop! While i was vaping I had decided to open the airflow because the mouthpiece was getting a bit hot but it was hard to turn and the whole body mooved just a little so when I opened it I saw the pin was a little bent . I managed to redress it but now I get the impression that the vapman's body is decentred and the airflow is less restrictive but still functional. This is my 1st vapman so now I prefer not to touch the airflow.
I always remove the midsection when I want to mess with the mouthpiece. Prevents damage to those more delicate parts.
 

Dr. G

Vapman Collector Vapman Beta Tester
Hello all, I am wondering if anyone has had their Click fall apart yet? The center pin on mine snapped near the base.

customer service asked me how I thought about a 50% discount, I think lots of lovely things about that but that's not worth a damn because they never actually sent me a discount code.

I really like this device so I went ahead and bought a replacement, I am a vocalist with severe allergies and this vape is the easiest on my lungs. I had already given customer service a week to reply to me, so I gave up.

I'm not even posting this as a negative review, I just wanted to see if anyone else has had a similar experience either with their vape falling apart or with customer service ghosting them.

I feel like I did something wrong here but I have no idea what. I'm autistic too which throws a huge wrench into this for me. Was I supposed to know what to do next, with no code or reply? No discount was applied to my replacement order, either. Maybe I should have written a note or something, but I'm deathly afraid of being obnoxious. But I'm also broke from vet bills 🤦‍♀ so a discount would have really helped me out!

It's definitely a frustrating experience and I'd also like to warn you that the center pin is DELICATE on the Click.

Otherwise, I'm SO IMPRESSED with the Click and it's been such a drag to use my dynavap and launch box till my replacement gets here. Launch box passes the reach test better than the dynavap because the wood reminds me of the vapman lol.

Sorry to insert myself like this but I hate Reddit so much, take care everyone! If I figure out how to post a picture (I can be a bit of a Luddite), I will post a couple pics of my fubar Click.
Greetings, I am sorry to hear that you are not happy with certain things...

As far as customer service...Michael and David are really swell fellas...they must be very busy. They will 100% get back to you and they will 100% be fair...I have known and delt with INHALE for years now, and I have had problems in the past but, they always put the customer first. They are very caring.

Sorry to hear about your CLICK. I hope that you get everything resolved soon so you can enjoy your Vapman journey like I have over the years. Take care of yourself and CHEERS!

DrG
 

vapman

Well-Known Member
Manufacturer
We’re really sorry for the way this played out—we completely messed up with your email, and that’s on us. We truly appreciate your patience, and we want to make this right for you. Please send us a quick email at info@nowinhale.com, and we’ll take care of everything immediately.

Also, I remember your case, and I wanted to let you know that thanks to feedback like yours, we’ve actually found a way to make the part that broke on your Vapman Click more stable! Your input really matters to us, and we’re grateful to have such thoughtful users like you in our community.

Looking forward to hearing from you soon!
Hello all, I am wondering if anyone has had their Click fall apart yet? The center pin on mine snapped near the base.

customer service asked me how I thought about a 50% discount, I think lots of lovely things about that but that's not worth a damn because they never actually sent me a discount code.

I really like this device so I went ahead and bought a replacement, I am a vocalist with severe allergies and this vape is the easiest on my lungs. I had already given customer service a week to reply to me, so I gave up.

I'm not even posting this as a negative review, I just wanted to see if anyone else has had a similar experience either with their vape falling apart or with customer service ghosting them.

I feel like I did something wrong here but I have no idea what. I'm autistic too which throws a huge wrench into this for me. Was I supposed to know what to do next, with no code or reply? No discount was applied to my replacement order, either. Maybe I should have written a note or something, but I'm deathly afraid of being obnoxious. But I'm also broke from vet bills 🤦‍♀ so a discount would have really helped me out!

It's definitely a frustrating experience and I'd also like to warn you that the center pin is DELICATE on the Click.

Otherwise, I'm SO IMPRESSED with the Click and it's been such a drag to use my dynavap and launch box till my replacement gets here. Launch box passes the reach test better than the dynavap because the wood reminds me of the vapman lol.

Sorry to insert myself like this but I hate Reddit so much, take care everyone! If I figure out how to post a picture (I can be a bit of a Luddite), I will post a couple pics of my fubar Click.
 
Top Bottom