The case is a must! Fits like a glove and smell proof!Those of you with a Venty, what’re your must have accessories for a first time buyer? Is an additional cooling unit the only must have extra?
The case is a must! Fits like a glove and smell proof!Those of you with a Venty, what’re your must have accessories for a first time buyer? Is an additional cooling unit the only must have extra?
Yep! My original did it. Haven’t gotten my replacement yet. Supposed to be here tomorrow. I’m assuming it’s where it’s still broadcasting for Bluetooth for a bit after it’s turned off.Has anyone else noticed that when you turn the Venty off, the screen doesn't fully turn off right away? You need to look from an acute angle to see it, but there's definitely still some light being emitted (its also probably easier to see in the darker environment). I timed it earlier and it was a little over 3 minutes before the screen really was "off".
It doesn't bother me, just curious to see whether others see the same.
190 ethanol, you say. I didn’t know this til I looked it up,but it’s less toxic than ISO… Amazon here I come.
For me the must have accessories are:Those of you with a Venty, what’re your must have accessories for a first time buyer? Is an additional cooling unit the only must have extra?
Would this be similar stuff? :You can’t buy 190 ETHANOL on Amazon. Some liquor stores carry 190 EVERCLEAR, same thing.
See if you can get a bottle of 190 EVERCLEAR, see how you like using it. It won’t go to waste, cause you could always DRINK IT!
Very helpful, thanks, Lurkermostly a lurker here (hope to buy a venty soon!) but coming out of hiding to chime in about solvents.
any ethanol you buy from Amazon is going to be denatured. this is a legal requirement in the US. any non-denatured ethanol has a huge tax placed on it since it's drinkable, and is much more tightly controlled regarding sale. i'd expect that whatever denaturant present is probably just as bad for inhalation/ingestion as isopropyl. denaturants will vary by blend (for example most commercial extraction outfits use CDA 12A)
isopropyl is toxic and can be legally sold at 99% without any added bitterants.. it's already got a pretty harsh smell.
tax and hazardous shipping considered, your best bet for pure ethanol is generally the liquor store. short of that, there's robably not much difference between denatured ethanol and isopropyl.
Would this be similar stuff? :
https://www.amazon.com/Medical-Grade-Ethanol-Production-Fermentation/dp/B08JHF6QLH/ref=sr_1_3?hvadid=580916678626&hvdev=c&hvlocphy=9004481&hvnetw=g&hvqmt=e&hvrand=6709307296264236555&hvtargid=kwd-296878129384&hydadcr=24360_13545533&keywords=95+ethanol&qid=1701097130&sr=8-3&th=1
For anyone else interested, you can get a menda bottle at Amazon, like this glass one:
Last question, then...
Do you submerge the CU pieces in ISO or ethanol? ie, how do you clean the non-contact parts? I've been using ISO.
In the small print:Very helpful, thanks, Lurker
I'm a bit dense with details, over analytical sometimes, but the link to the medical grade ethyl alcohol shows the following ingredient:
Dropbox - File Deleted - Simplify your life
www.dropbox.com
What is denatured about this??
Couldn't you just use ISO then do a burn off?
Hot air goes up right? Why putting a freshly used (hot) Venty body upside down after applying denatured alcohols on it? Doesn’t doing so results in any remaining fumes going up, where “up” means beneath the chamber bottom, compromising the air path?
Denaturing process basically means adding nasty flavors in order to make that alcohol undrinkable. Why creating fumes of that nasty stuff close to where you breathe from? Upside down or not, hot or cool Venty, I would never put alcohol wherever I can’t disassemble such part and then rinse it off with water. Let alone doing so after every use.
Given that “sticking to the rules” is a virtue, shouldn’t it apply also to the cleaning process? To me this is more dangerous than inverting coarse screen with fine screen.
If you read the product description:
“This product has been specially denatured according to FDA requirements and does not require additional denaturing to produce hand sanitizer. Denaturing is required by the FDA to discourage oral ingestion.”
Gentlemen thank you for the correction.In the small print:
>>begin qoute
About this item
Meets FDA requirements for sanitizer production. Does not contain methanol.
Made in the USA. No Fermentation Smell.
Manufactured in a FDA-registered facility
Recommended by the WHO, CDC and FDA
Denaturant: Denatonium Benzoate at 40 ppm
I'm glad you asked! Now I can find out the answer, too. I hesitate to use Venty (or Mighty) without capsules because I think I'd do mediocre job of replacing that screen. I just know I'd deform it somehow. WIth capsules it stays pretty cleanHi...stupid question I am sure. But, still a newbie. Also, do not know if the question is in the right place. Ok. So...the screen that is under the herb over the heater...is that replaceable? I am just curious. My Mighty needs one and I am curious about the Venty one. Ok...you can laugh now.
Just received a DHL express tracking for my replacement Venty, are anybody else’s replacement in express?
Glad to see you got your Venty today too! Man, I missed it!!hello hello
I was one of the tens or thousands who ordered when they said it was in stock and then got an email saying it was out of stock.
I ordered on 23.10. at eight o'clock in the evening
since then i've been patiently waiting, reading this thread and wondering how aggressive they can be sometimes.
now I'm holding it in my hand and I have to say that they perfectly kept everything that SB promised.
so I'm going to read the instructions and connect with the application
and of course I'll taste something from my garden........
thanks everyone for the support in the wait, without you it would have been a lot more boring and I'd probably start pestering SB with questions, which I'm glad I didn't have to.
surely they had more important things to worry about than dealing with my impatience and frustration that the world is not as it should be.
see you
david
Hi...stupid question I am sure. But, still a newbie. Also, do not know if the question is in the right place. Ok. So...the screen that is under the herb over the heater...is that replaceable? I am just curious. My Mighty needs one and I am curious about the Venty one. Ok...you can laugh now.
Hi...stupid question I am sure. But, still a newbie. Also, do not know if the question is in the right place. Ok. So...the screen that is under the herb over the heater...is that replaceable? I am just curious. My Mighty needs one and I am curious about the Venty one. Ok...you can laugh now.
I switched out the stock screen for these concave metal screens
I remember seeing some one do it on a mighty like a decade ago
I think i adds more conduction with the high air flow
also they dont get any off that clogging of the screen from fine
I switched out the stock screen for these concave metal screens
I remember seeing some one do it on a mighty like a decade ago
I think i adds more conduction with the high air flow
also they dont get any off that clogging of the screen from fine grind