-
SCAM WARNING! See how this scam works in Classifieds.
FROLIC by Limelight Herb
- Thread starter Dr. G
- Start date
Just Justin
Well-Known Member
I jumped on board… looks like a great vape. To my eye, it’s a mash up of the TinyMight Heater wrapped in a more convenient /simple Storz & Bickel Crafty package.
Troy from 420vapezone gave it a great initial review and he knows his stuff, so that’s what got me to grab one. Supposed to ship tomorrow from the US to me in MI.
Troy from 420vapezone gave it a great initial review and he knows his stuff, so that’s what got me to grab one. Supposed to ship tomorrow from the US to me in MI.
Flotsam
Well-Known Member
sorry i can't edit this question now, but i did look on web site https://www.limelightherb.com/ and found some great pics
congrats on the design it is very distinctive
I like a lot of things about the design especially the heater
Just Justin
Well-Known Member
For those that have the Frolic, are you using on demand or session mode? How hot does the device get and how long you run and temp?
Also, where is the air intake?!?!
Also, where is the air intake?!?!
SolidAirrr
Well-Known Member
It's on the side of the device.
In that 'exploded-view', two posts over yours, you can see inlets in the grey part, next to the screws on the grey part as well as on the black part on the right side of that pic.
fog0nthetyne
Active Member
I’ve used it exclusively in session mode so far as that is my preference. It goes to 220°c in session mode. If you mean does the device get hot when using, then yes it does compared to most other vapes I’ve used but the heater in this one is bigger and more powerful so this is to be expected… it’s not burning hot and still totally comfortable to use. I run for the full 300 second timer. Normally start at 180° then move to 200° and then 220° to finish.
Valravn
New Member
I saw on the fb group about shipping on Thursday now so idk
I forgot to check the group, been coming here for updates. Thank you for pointing that out!!
TheUniBowler
Member
I’m curious if the Thursday US shipping is for the 10% off code and people with the 19% are getting tracking already. I had the day one invoice and paid yesterday but nothing yet
I think Thursday is EU shipping.
Valravn
New Member
I think Thurs is us shipping day too, I haven't gotten a tracking slip either and I did the list.
Hi guys, I am in transit these days so replies might come a bit delayed. I will go back and reply to individual posts.
General info is, the US packages are being packed up and shipped out either today or first thing tomorrow, Thursday morning.
General info is, the US packages are being packed up and shipped out either today or first thing tomorrow, Thursday morning.
someTooL
Well-Known Member
@Dejan LimelightHerb So I’m taking it I can stop checking my inbox for an invoice?
TheUniBowler
Member
Check junk if you haven’t I fund mine there
Valravn
New Member
I'm figuring I'll have mine by mid next week, depends where/when it ships out, yours might be different if it ships out closer
but that works for me since I got a new 14mm stem to mate with it.
Zero_Combustions
Member
Frolic landed today (UK). Great feel and design but disappointed with my first bowl. No real vapour production but cooked the bowl fully.
I’ve only been able to have the one bowl so far and I used the standard mouthpiece with the airflow wide open. On demand mode. Cleared in 3 big slow draws. First hit at 190°c then the second and third at 210°. The flavour was there and there was visible vapour but I was expecting big clouds like my TB2 produces and it was a little underwhelming.
Need to keep playing around with temps and airflow etc. Also wanna try the fold out mouthpiece and session mode.
I’ve only been able to have the one bowl so far and I used the standard mouthpiece with the airflow wide open. On demand mode. Cleared in 3 big slow draws. First hit at 190°c then the second and third at 210°. The flavour was there and there was visible vapour but I was expecting big clouds like my TB2 produces and it was a little underwhelming.
Need to keep playing around with temps and airflow etc. Also wanna try the fold out mouthpiece and session mode.
How's the native cooling? Feel free to share more comparisons vs the TB2 in the dedicated thread
ConVex vs Frolic vs TB2 (Tafée Bowle II) vs TM2 (Tinymight 2)
Hey guys, so I have a TM2 and have been thinking of upgrading to one of the hot new portable vapes... :D How do they compare? Thanks!
fuckcombustion.com
TigoleBitties
Big and Bouncy
Frolic has landed! First impressions below.
The build appears really solid. Feels good in the hand and has some nice heft to it. I didn't notice much of any robot fart smells before or after burnoff. Airflow controls are pretty easy but as mentioned before you do sometimes have to hold the mouthpiece so they don't rotate in tandem when you're adjusting it. I left it wide open initially and it felt super airy.
My first go I loaded just enough flower to cover the bottom screen and tried on-demand mode at 400F. Only took about 5sec from cold to buzz. I took a nice long draw and only got wispy vapor. Taste seemed a bit thin. I tried a couple more pulls and got more vapor but everything felt a bit too airy. I looked at the bowl and it was already spent. A very nice toasty brown.
I decided to make a couple of adjustments so I loaded another very small bowl with flower just covering the screen. I closed off the airflow about 25% and cranked the heater up to 440F. Huge improvement in vapor production and taste! Very very TB2-like type hit with big clouds and big taste. There's no lack of power in the heater. I had forgotten this thing can get up to 464F in on-demand mode but I will say that hits I got at 440F were impressive. Speed is also there as the bowl was cashed in two hits and subsequent heat-ups were 2s or less.
I have a lot more experimenting to do but initial futzing around is looking promising! I had charged my battery fully before vaping and the meter hasn't moved after these two bowls.
And finally capsules! The AVLP gold plated capsules that I hold in high regard actually almost fit perfectly! These last two shots show that they're just a bit too high (CU is almost flush) but seem a better fit than the S&B ones from the pics here on the forum. I will definitely be trying a session mode with these guys soon.
Edit: I forgot to mention one slight negative. In the couple of back-to-back bowls I tried on-demand, the unit does get close to being too hot to handle at the very top of the CU, near the Limelight logo mostly. I don't think it'll be an issue for me but this thing does put out some serious heat.
The build appears really solid. Feels good in the hand and has some nice heft to it. I didn't notice much of any robot fart smells before or after burnoff. Airflow controls are pretty easy but as mentioned before you do sometimes have to hold the mouthpiece so they don't rotate in tandem when you're adjusting it. I left it wide open initially and it felt super airy.
My first go I loaded just enough flower to cover the bottom screen and tried on-demand mode at 400F. Only took about 5sec from cold to buzz. I took a nice long draw and only got wispy vapor. Taste seemed a bit thin. I tried a couple more pulls and got more vapor but everything felt a bit too airy. I looked at the bowl and it was already spent. A very nice toasty brown.
I decided to make a couple of adjustments so I loaded another very small bowl with flower just covering the screen. I closed off the airflow about 25% and cranked the heater up to 440F. Huge improvement in vapor production and taste! Very very TB2-like type hit with big clouds and big taste. There's no lack of power in the heater. I had forgotten this thing can get up to 464F in on-demand mode but I will say that hits I got at 440F were impressive. Speed is also there as the bowl was cashed in two hits and subsequent heat-ups were 2s or less.
I have a lot more experimenting to do but initial futzing around is looking promising! I had charged my battery fully before vaping and the meter hasn't moved after these two bowls.
And finally capsules! The AVLP gold plated capsules that I hold in high regard actually almost fit perfectly! These last two shots show that they're just a bit too high (CU is almost flush) but seem a better fit than the S&B ones from the pics here on the forum. I will definitely be trying a session mode with these guys soon.
Have a look at my impressions above. Try reducing your airflow a bit and raise your temps in on-demand mode to at least 228C.
Edit: I forgot to mention one slight negative. In the couple of back-to-back bowls I tried on-demand, the unit does get close to being too hot to handle at the very top of the CU, near the Limelight logo mostly. I don't think it'll be an issue for me but this thing does put out some serious heat.
Last edited:
I think @Dejan LimelightHerb said that the CU is supposed to max at 60C which is 140F doing quick math in my head ((2C - 10%) + 32 = F iirc).
That's the temp of a medium-well steak! It'll definitely feel too hot for a lot of people to handle more than a few seconds but certainly isn't burn-your-fingers hot.
Edit: its 55C not 60 as pointed out in a later post by another. That's more like rare to medium rare at 131F but the last part of the original message still stands
Last edited: