FROLIC by Limelight Herb

[Dejan LimelightHerb]

So you get all 3?

Yes all 3 are included for the early adopters.

Is there a code for the mentioned additional 10%?

Yes, there will be.

I agree with you, pangolin. I don't need to know all the nitty gritty details as to what's gone wrong, but I very much appreciate being kept in the loop so I can have reasonable expectations and not the ones I make up as my mind wanders.

Which brings me to.... @Dejan LimelightHerb, if the tax man doesn't fight some of the "dubious" claims I'm going to make on my claim this month (I'm not ommitting "fraud" fraud, just stretching the truth a bit) then I be buying asap. If not, I'll save a bit and grab it anyway as I was interested to start with and everything since the announcement has turned my interest into desire.

Thank you. Tax fraud is awesome btw, good job Robbin Hood!

Hopefully or I might kick this off my list for a year to see how this gets received with all the aluminum already part way through my portable reviews anyway. With the delays already and self admittance of not being much of a vaporist. Makes me question a lot about this device clueless that aluminum and plastic wasnt going to be a selling point. Makes me wonder how well this will perform if its just theory in a box without proper testing.

The delays are what they are. Granted, this could have been done faster under different circumstances, but in thus reality, thus was the best we could do.

Not sure if I understood this well, but if you are assuming that we would go through a project like this without proper testing, I can assure you that was not the case and would be an incredibly dumb thing to do.

I have explained the materials a few posts above, PEEK doesn't have any particular downsides with this implementation and there is no bare aluminum in the airpaths, the contact surface is hard anodization.

In any case, a lot of units will go to reviewers long before any are shipped out to customers. Admittedly, we are late with this but will correct it at the expense of people waiting a bit before they pull the trigger.

 

[NorthernHigh420]

Yes all 3 are included for the early adopters.

Yes, there will be.

Thank you. Tax fraud is awesome btw, good job Robbin Hood!

The delays are what they are. Granted, this could have been done faster under different circumstances, but in thus reality, thus was the best we could do.

Not sure if I understood this well, but if you are assuming that we would go through a project like this without proper testing, I can assure you that was not the case and would be an incredibly dumb thing to do.

I have explained the materials a few posts above, PEEK doesn't have any particular downsides with this implementation and there is no bare aluminum in the airpaths, the contact surface is hard anodization.

In any case, a lot of units will go to reviewers long before any are shipped out to customers. Admittedly, we are late with this but will correct it at the expense of people waiting a bit before they pull the trigger.

I guess im just surprised that you were surprised that was a thing in Dry herb vaping which just makes me question how dialed in this will be or if ill be beta testing it basically. With the flex of best materials ever used I feel thats a fair thing to wonder. Mostly just content pieces for me on battery portables I tend to lean more analog on the go. Being it seems the 10 percent extra will be there ill end up purchasing it if the availability works out

 

[chillAtGVC]

Storz and Bickle uses PEEK for the Venty (and the venerable Crafty and Mighty — I think). If it’s good enough for a German medical device manufacturer it’s good enough for me.

 

[NorthernHigh420]

Storz and Bickle uses PEEK for the Venty (and the venerable Crafty and Mighty — I think). If it’s good enough for a German medical device manufacturer it’s good enough for me.

I don’t have an issue personally with the materials but I do know that Ill get plenty of comments about it when I do videos.

 

[TheUniBowler]

Im eagerly awaiting the release. 19% off this thing has me sold day one. IDC if the materials end up being a failure point. (I’m sure they won’t)

That being said also, we have forsure removed the removable heating unit for cleaning? I saw that being a feature I was drawn too however not a deal breaker if not

 

[Dejan LimelightHerb]

Storz and Bickle uses PEEK for the Venty (and the venerable Crafty and Mighty — I think). If it’s good enough for a German medical device manufacturer it’s good enough for me.

You are correct, the parts around the oven and the cooler are PEEK, the body is PC on all the devices.

Im eagerly awaiting the release. 19% off this thing has me sold day one. IDC if the materials end up being a failure point. (I’m sure they won’t)

That being said also, we have forsure removed the removable heating unit for cleaning? I saw that being a feature I was drawn too however not a deal breaker if not

Thanks!

The idea was to have a removable oven without the need for any tools, but I have failed at designing this without compromising performance and heater integrity (depending on the user of course, but didn't want to risk it). I will stay committed to bringing this to fruition in the future (If the Frolic does not fail, everything goes to shit and I off myself of course)

 

[TigoleBitties]

Storz and Bickle uses PEEK for the Venty (and the venerable Crafty and Mighty — I think). If it’s good enough for a German medical device manufacturer it’s good enough for me.

The AVLP (1&2) also use PEEK as well as the Herbalizer off the top of my head.

 

[terpfein37]

Hi Dejan, I’m new to this forum and came across your device, it looks really interesting! Sorry in advance for the long post.

I’m looking to switch from combustion, but I know I’ll need a heavy hitter to make the switch worth it. I’ve looked at a few devices such as the TM2, Tafee Bowle 2, vestratto tornado, multiple ball vapes, and the silver surfer. I’ve narrowed it down to needing a portable, but I’d like as similar (vapor) performance to a ball vape as I can possibly get. The TM2’s battery life and the TB2’s form factor are both issues for me for how much I’d be paying. The tornado interests me a lot because of how many people I’ve heard say that it shelved their ball vapes, but butane vapes have their own set of challenges (plus its soooo hard to get). I’ve also heard its taste isn’t as good as more convection forward vapes, which is a bit important to me since coming from combustion I’ve never really tasted anything other than burnt plant material.

How would you say the Frolic’s performance is on-demand mode compared to the other vapes I’ve mentioned, in terms of how hard hitting the high is and the taste? I’m looking for a heavy-hitter device that’ll last me a long time, so I’m fine with the higher price tag (though the TB2 is definitely pushing it lol)

 

[Grass Yes]

How would you say the Frolic’s performance is on-demand mode compared to the other vapes I’ve mentioned, in terms of how hard hitting the high is and the taste?

Comparison between vapes is discouraged in device threads. Ideally this kind of comparison belongs in the Ask FC section.

Obviously this device is not yet released so only folks at Limelight know, but probably better to just wait until FC members have it in hand anyway.

 

[terpfein37]

Comparison between vapes is discouraged in device threads. Ideally this kind of comparison belongs in the Ask FC section.

Obviously this device is not yet released so only folks at Limelight know, but probably better to just wait until FC members have it in hand anyway.

Ohh sorry, I’ll make make a post there when its out then!

 

[Dejan LimelightHerb]

Comparison between vapes is discouraged in device threads. Ideally this kind of comparison belongs in the Ask FC section.

Obviously this device is not yet released so only folks at Limelight know, but probably better to just wait until FC members have it in hand anyway.

Buzz kill, I was just getting ready here

Ohh sorry, I’ll make make a post there when its out then!

Thank you for your comment and for considering the Frolic, but yes, what Grass said. Best to wait it out. Hopefully we will have the free unit sent out to whoever ends up to win the giveaway here and we will also send out units to all the reviewers you can think of so everyone can go by that. We are currently a week away from this, if anything changes, I will update you guys here.

 

[TheUniBowler]

Buzz kill, I was just getting ready here


Thank you for your comment and for considering the Frolic, but yes, what Grass said. Best to wait it out. Hopefully we will have the free unit sent out to whoever ends up to win the giveaway here and we will also send out units to all the reviewers you can think of so everyone can go by that. We are currently a week away from this, if anything changes, I will update you guys here.

My college education is banking on winning the give away

Otherwise no books for me small price to get faded asf

 

[terpfein37]

My college education is banking on winning the give away

Otherwise no books for me small price to get faded asf

Lmaoo I’m needing a nice device for my last year of college my lungs can’t deal with ripping 10-15 bowls a day anymore

 

[SolidAirrr]

to all the reviewers you can think of so everyone can go by that. We are currently a week away from this

Too curious to not ask whether this "week" is referring to general opening of shop or just to units to reviewers, etc?

 

[Dejan LimelightHerb]

Too curious to not ask whether this "week" is referring to general opening of shop or just to units to reviewers, etc?

Due to the shipping issues we have encountered, both will happen at the same time. We will have the units at shipping points from where they will immediately go out to reviewers and some other guys and the giveaway winner and sales will start the same day. We will also receive orders from early adopters here also so they can share their thoughts also.

 

[NorthernHigh420]

Due to the shipping issues we have encountered, both will happen at the same time. We will have the units at shipping points from where they will immediately go out to reviewers and some other guys and the giveaway winner and sales will start the same day. We will also receive orders from early adopters here also so they can share their thoughts also.

Hopefully soon, I added to the list of the ones im breaking down when it looked like it was going to be available earlier. Been kind of holding back waiting on it to release