Dani Fusion by Battery-free Ganz

[maremaresing]

Mine came that way, too, and I agree that it's probably something reacting inside the leather slip pouch. My Fusion 2 had zero manufacturing residue present anywhere on the device. I always clean received items (and those I ship out lol), but it likely wouldn't have needed it. Heating or polish pads will bring it back nicely.

It did take me aback a little bit when it arrived, so maybe they should do something to keep it from happening.

 

[DgN'R]

Mine came that way, too, and I agree that it's probably something reacting inside the leather slip pouch.

Ok, I understand, indeed, I received my Dani Fusion 2.0 Artemis without waxed leather case (and mine was all clean)

 

[Con Rodeo]

Does the poker get restocked often or should I just pull the trigger on one of the other models? Looking for an analogue vape I can use natively.

 

[spazzoo]

Another update for anyone still interested in my saga with The Flare:

After a few more back and forths with BFG they have kinda stopped responding. They still didn't really have any solutions, just wanted me to send my Flare and my Fusion 2.0 in so they could determine where the issue was. I asked some follow up questions and haven't heard anything but tbh don't love the idea that I have to send all my stuff in and they "may" be able to figure it out...

At this point I kinda just want a refund. Pretty disappointing experience with BFG

My recc is DO NOT buy the Flare for now

 

[tester21]

What do you use to adjust the bowl size? I assume I have to push from the bottom like a Dynavap but I don't have anything small enough.

 

[Robthebob]

Does anyone have experience with the metal and the short wooden stem? I'm very happy with the short wooden stem, but I'd also like the metal stem. I'm just concerned that it might get significantly hotter. Thank you.

 

[maremaresing]

Made a pipe for my Fusion 2. Love having something keep the hot tip off the table while it cools, so I can just set it and forget it.

What do you use to adjust the bowl size? I assume I have to push from the bottom like a Dynavap but I don't have anything small enough.

I just poke a dyna intercooler/5mm tube behind it, but the metal magnetic decapper tool WesleyPipesAndMore sells is actually the perfect size for pushing the screen in evenly. The Driptip on the Fusion also is the perfect size for slowly inserting and seating a screen.

Does anyone have experience with the metal and the short wooden stem? I'm very happy with the short wooden stem, but I'd also like the metal stem. I'm just concerned that it might get significantly hotter. Thank you.

The standard metal stem is super pretty and has enough mass to not really heat up much on one or two stem loads.

 

[UhuM]

The standard metal stem is super pretty and has enough mass to not really heat up much on one or two stem loads.

This. It transfers some heat, but as long as you don't heat up 3+ bowls in a row, it should be ok.

As for the screen: I'm using the screen-removal/position rod, included in most current vaphit sets.
Else: get the diameter and search for some spare axles (f.e. for 3d printers)

 

[kegstandman420]

I have a question about the fusion 2.0 mouthpiece. Is it 9mm like the tip, or is it a different size? On the site it seems like the mouthpiece is smaller. I make wooden stems and would like to add a mouthpiece to some of my set ups.

https://imgur.com/a/MtrUBjW

 

[.jOe]

Approx 8.5mm any 510 drip tip fits the fusion stems

 

[kegstandman420]

Approx 8.5mm any 510 drip tip fits the fusion stems

So on their stems the tip end and mp end are different size?

 

[.jOe]

This I would need to confirm by measuring, if I remember correctly they fit both sides.
8.5mm is the diameter of the 510 drip tips and the o rings seal it I’d expect the stem to be 9mm on both sides, will get the caliper and measure but currently at work.

 

[maremaresing]

Both ends are 9mm. It fits "standard" 510 drip tips, but the BFG mouthpieces have a deeper insertion. From my measurements, most 510 drip tips target 8.5mm for the piece, with fluctuations up to 8.7mm. They vary wildly from there based on oring, with a general target of an 8.95mm to 9mm inlet compatibility.

So just make the mouthpiece end on your stems the same compatibility as your Fusion tip end and you'll be good to go.

 

[Rodney]

Ok it is time to get this back out used for one session then cleaned out and ready for tonight.

 

[Rodney]

Been using my DF2 for a few days now and nothing hits as good as this. Am sure tis because of the tight vapor path.

 

[TheScamericann]

Been using my DF2 for a few days now and nothing hits as good as this. Am sure tis because of the tight vapor path.

Yeah I think so too. It's the best vaporiser I've used for mtl hits and right up there with the solo 3 as the best through a water pipe.