• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Thc oil making e - juice?

Manwithnoname

New Member
Is it possible to use thc oil made with isoprophyl for vaping? Could i mix it with peg 400 or could i use a regular e- juice?
 
Manwithnoname,

CR250M

Ontario, CA
dunno if it's safe but people have been smoking isy wash oil for at least 30 years... your best bet is to ensure all the isy is evaporated as much as possible and only try with a qwik wash honey oil and not a green oil.... what I used to do is after the oil was nice and thick in the bottom of my stainless pan I'd use a hair dryer for about 1/2 hour and heat and blow until the oil resembled shatter, careful pan gets hot hot hot
 
CR250M,

shredder

Well-Known Member
dunno if it's safe but
Sounds a lot like, " hold my beer and watch this"

People should know what goes in their lungs is safe.

A quick look through the threads here will show a lot of people with compromised health.

Even if your young and healthy now, you might not be healthy forever if you don't take care of yourself.
 
shredder,

scy123

Trusted Member Don't Worry
A lot of herb on the black market has tons of mystery pesticide residue in it anyways. Not really gonna be 100% safe unless you get really regulated stuff. ISO can be completely purged, just need to be more strict if you are afraid of remaining residue. Can even use everclear (95% ethanol) if you really want to be safe.

Health issues aside, make sure you use really clean oil, any impurities will result in carbon buildup in the wick and just not work well after a few hits. Almost all ejuice contains VG, any significant amount of VG in the mix will cause the oils to not homogenize properly, short answer do not use ejuice. peg I hear is questionable, if you want to risk it is up to you, but it will work as long as the oil is clean. Pure PG will work, but the oils will separate after a couple weeks, really you will probably vape it all before it separates anyways. PG is used in about all of ecig ejuice and I would not say it's questionable at all.

You can also try terpenes as a thinner. Terpenes is in weed anyways, so I would not say it is anymore harmful unless you added way more than you should. Terpenes is a solvent so a highly concentrated amount will cause problems.

I was experimenting a lot on THC ejuice before and a lot of solutions sucked ass. Should just get yourself a "wax tank" and vape oils pure.
 
scy123,
  • Like
Reactions: Jong

Jong

New Member
A lot of herb on the black market has tons of mystery pesticide residue in it anyways. Not really gonna be 100% safe unless you get really regulated stuff. ISO can be completely purged, just need to be more strict if you are afraid of remaining residue. Can even use everclear (95% ethanol) if you really want to be safe.

Health issues aside, make sure you use really clean oil, any impurities will result in carbon buildup in the wick and just not work well after a few hits. Almost all ejuice contains VG, any significant amount of VG in the mix will cause the oils to not homogenize properly, short answer do not use ejuice. peg I hear is questionable, if you want to risk it is up to you, but it will work as long as the oil is clean. Pure PG will work, but the oils will separate after a couple weeks, really you will probably vape it all before it separates anyways. PG is used in about all of ecig ejuice and I would not say it's questionable at all.

You can also try terpenes as a thinner. Terpenes is in weed anyways, so I would not say it is anymore harmful unless you added way more than you should. Terpenes is a solvent so a highly concentrated amount will cause problems.

I was experimenting a lot on THC ejuice before and a lot of solutions sucked ass. Should just get yourself a "wax tank" and vape oils pure.
Hello there brother, I'm resolving my mix because I got separation after a day or two with my procedure using hot plate stirrer for mixing. What you think about homogenizing the mixture (rosin, PG, VG, PEG400) using homogenizer machine to address the separation? Thanks in advance. 😁
 
Jong,

shredder

Well-Known Member
Hello there brother, I'm resolving my mix because I got separation after a day or two with my procedure using hot plate stirrer for mixing. What you think about homogenizing the mixture (rosin, PG, VG, PEG400) using homogenizer machine to address the separation? Thanks in advance. 😁

Do you know that there are all terpene liquidizers (100% terpenes) with no pg, vg, or peg 400? Much safer imo.
 

Jong

New Member
Do you know that there are all terpene liquidizers (100% terpenes) with no pg, vg, or peg 400? Much safer imo.
Yeah I know terpenes will produce great results but I'm not into vape pen, too strong for what I intended dosing and also the issue is it's too expensive in my country. I even tried importing some before and the customs confiscate my package coz it's prohibited in my country. I wanted to use solvents that is accessible in my country which is PG, VG, PEG400.
 

scy123

Trusted Member Don't Worry
Hello there brother, I'm resolving my mix because I got separation after a day or two with my procedure using hot plate stirrer for mixing. What you think about homogenizing the mixture (rosin, PG, VG, PEG400) using homogenizer machine to address the separation? Thanks in advance. 😁

Yes, separation is a huge issue, one of the reasons why I gave it up. A lot of people dilute with terpenes to avoid separation, but you can only dilute so much with terpenes as it's really thin and will thin your oil a lot, not to mention terpenes in large concentrations will dissolve your plastic tanks and seals.

I actually been wanting to try using a homogenizer for the longest time. A homogenizer should be able to emulsify mostly anything we throw at it. Problem was that the ones I found cost a couple thousand.

I ordered this recently though. https://www.vevor.com/products/disp...er-10-1000ml-110v?_pos=4&_sid=d7f173645&_ss=r

Haven't tried it yet, but a homogenizer for $120, worth a shot even if it doesn't work well, which I don't see why it wouldn't work well.

Edit- BTW that homogenizer is a generic chinese fsh-2a. You can find some reviews and videos on youtube. Some people use it to make diy skin cream and stuff it seems.

Edit 2- Sorry, for the edits, lol. Always have more info I like to share, but forget to add. I will probably post my results here when I try it, but in my search for homogenizers I found some homogenizer manufacturers even advertise towards cannabis oil usage.

Here is an article from Proscientific on using their homogenizers with cannabis oils.
CATScientific Even made an account on a cannabis oriented site to help people on using their homogenizers with oils. Here is one writeup from them on this https://future4200.com/t/cat-homogenizer-for-vg-tincture/1108/3
 
Last edited:

Jong

New Member
Yes, separation is a huge issue, one of the reasons why I gave it up. A lot of people dilute with terpenes to avoid separation, but you can only dilute so much with terpenes as it's really thin and will thin your oil a lot, not to mention terpenes in large concentrations will dissolve your plastic tanks and seals.

I actually been wanting to try using a homogenizer for the longest time. A homogenizer should be able to emulsify mostly anything we throw at it. Problem was that the ones I found cost a couple thousand.

I ordered this recently though. https://www.vevor.com/products/disp...er-10-1000ml-110v?_pos=4&_sid=d7f173645&_ss=r

Haven't tried it yet, but a homogenizer for $120, worth a shot even if it doesn't work well, which I don't see why it wouldn't work well.

Edit- BTW that homogenizer is a generic chinese fsh-2a. You can find some reviews and videos on youtube. Some people use it to make diy skin cream and stuff it seems.

Edit 2- Sorry, for the edits, lol. Always have more info I like to share, but forget to add. I will probably post my results here when I try it, but in my search for homogenizers I found some homogenizer manufacturers even advertise towards cannabis oil usage.

Here is an article from Proscientific on using their homogenizers with cannabis oils.
CATScientific Even made an account on a cannabis oriented site to help people on using their homogenizers with oils. Here is one writeup from them on this https://future4200.com/t/cat-homogenizer-for-vg-tincture/1108/3
Thanks for the update brother. I am saving a lil bit of $ to purchase a generic homogenizer that has 22,000 RPM. hope it works man. I will update here if all works well. Peace!

EDIT: I saw the link you post in your reply about CAT homogenizer and it was great man, they even used a VG in the experiment. hope it works with PG/VG too so I can eliminate PEG400, I really dont like the taste of PEG400 though. The homogenizer you link is the one I am planning to buy. let's see the results. happy exploring!
 
Last edited:
Jong,

scy123

Trusted Member Don't Worry
They used pure VG which is harder to homogenize than PG. A VG/PG blend should work better, and yes PEG is ass.

I'll probably make a 50/50 VG/PG blend sometime this weekend. Gonna be using filtered and decarbed THC-A though which is a lot cleaner than most concentrates.
 
scy123,

scy123

Trusted Member Don't Worry
I tried the blend, it homogenized some of it. Requires a bit of work, multiple runs, I seen somewhere they recommend only doing 1-2min runs for whatever reason. Still Some separation.

It was 3g of that thc-a and 12ml pg/vg. I would say about around .5g of that thc-a still falls out and raises to the top.

This is as far as I got with that. Usually all of it would fall out and their would be zero homogenization with vg, easy to tell cause the vg/pg blend would be pure white.

I took apart that rotor shaft. it's all stainless steel with a teflon busing. Teflon might be a problem, keep that in mind.
 
scy123,
  • Like
Reactions: Jong

Jong

New Member
I tried the blend, it homogenized some of it. Requires a bit of work, multiple runs, I seen somewhere they recommend only doing 1-2min runs for whatever reason. Still Some separation.

It was 3g of that thc-a and 12ml pg/vg. I would say about around .5g of that thc-a still falls out and raises to the top.

This is as far as I got with that. Usually all of it would fall out and their would be zero homogenization with vg, easy to tell cause the vg/pg blend would be pure white.

I took apart that rotor shaft. it's all stainless steel with a teflon busing. Teflon might be a problem, keep that in mind.
good to hear back from you brother. would you upload your results here for us to see? and also why would the teflon be a problem?
 
Jong,

scy123

Trusted Member Don't Worry
Gimme a month or 2 maybe, I am still in the experimenting phase.

Teflon is known to offgas toxins at around 550f, and a teflon bushing may release micro particles of it in the concentrate. I'm still on the fence about what to think about it.
 
scy123,

xuledywo

Member
A lot of herb on the black market has tons of mystery pesticide residue in it anyways. Not really gonna be 100% safe unless you get really regulated stuff. ISO can be completely purged, just need to be more strict if you are afraid of remaining residue. Can even use everclear (95% ethanol) if you really want to be safe.

Health issues aside, make sure you use really clean oil, any impurities will result in carbon buildup in the wick and just not work well after a few hits. Almost all ejuice contains VG, any significant amount of VG in the mix will cause the oils to not homogenize properly, short answer do not use ejuice. peg I hear is questionable, if you want to risk it is up to you, but it will work as long as the oil is clean. Pure PG will work, but the oils will separate after a couple weeks, really you will probably vape it all before it separates anyways. PG is used in about all of ecig ejuice and I would not say it's questionable at all.

You can also try terpenes as a thinner. Terpenes is in weed anyways, so I would not say it is anymore harmful unless you added way more than you should. Terpenes is a solvent so a highly concentrated amount will cause problems.

I was experimenting a lot on thc vape juice before and a lot of solutions sucked ass. Should just get yourself a "wax tank" and vape oils pure.
Hi. I am new to vaping, and I am wanting to make my own cannabis E juice. I keep seeing conflicting instructions on how to go about this. I came across a video where the guy takes VG and PG, and puts 80% VG and 20% vg, to make a total of 100ml of them both combined. He then put 10g of decarbed cannabis into the jar and stirred. He then boiled water in a pot, and put the mixture (still in its own jar) into the hot water, and let it sit there for around 2-3 hours total. But 3 times in between, he strained the mixture through coffee filters. Does anyone know if this is actually a good way to make E juice? if not, can you recommend me anything or give me tips? I am trying to find a simple way to do this. I saw another method which includes alcohol, which I want to avoid doing. Thank you!
 
xuledywo,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Whenever movies show a character who likes to get high vaping, it's always with some crazy e-cig tank, and I'm thinking there is no way this character is at home making the necessary type of oil to be used in that type of vape for cannabis... Just makes me think the creators don't actually know anything about vaping weed, but clearly some people are doing this or trying to! Good luck Sorry I can't help
 
Shit Snacks,
  • Like
Reactions: shredder

ScyOne

Well-Known Member
I would say THC ejuice only sucks cause using any significant amount of VG would make it seperate. And VG is what carries ecig vaping. If you can't Use VG it's not gonna work very well.

It's doable though, I have a half VG half rosin mix that is going on over a month with only minor separation like color streaks.
 
ScyOne,
Top Bottom