Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

[anasrzi]

Finally got my delivery of my flower pot pieces today, one 16mm dnail wrap round (for my already sorted SiC dish), coil cover, 14mm stubby and bottom nut to screw it all together .

First impressions to the naked eye is what amazing build quality!!! You can clearly tell @NewVape710 takes such pride in what he produces, the finish on the items is exquisite, each fits perfectly. The only bit of stiffness was getting the SiC dish on to the wrap round but a bit of coconut oil on the inside rim of the dish and it fell into place. Love the fact you get those little certificates for each part too, nice touch .

Won't be testing it out until next weekend as I'm driving at four in the morning onward to our holiday destination.

Even tho I'm yet to use it all together I want to say a big thanks to edwyn at new vape for making such a thing of beauty, all you guys here for setting me onto the device in the first place and of course fuck combustion for simply being

 

[Andreaerdna]

The showerhead is easier than a bic lighter for flower. And did I mention no coughing. I'm not sure why. I'm beginning to think coughing might be associated with draw resistance.

For sure when there is draw resistance the pressure exerced to inhale is created at lungs, and everything else is related to human vaporpath, expenses

Muscles are stretching lungs to open and inhale but on the other side there is no enough air coming, pressure inside your lungs is decreased/ vacuum effect - exposing by the way the matrix of lungs (alveolis) getting over irritated?

I think you are on something about draw restriction and lung stress/ coughing

 

[goodpunk6]

Can't wait to start my new job. I'm upgrading to a 20mm coil and a showerhead combo with showercap. Would love a quartz style showerhead. The showerhead reminds me of the OG flowerpot.

 

[invertedisdead]

Im trying to hold off posting initial thoughts for fear of getting a little too hyperbolic, but so far, with just flower, there is zero need for a carb cap with the showerhead.

And it milks thicker, quicker and less aggravating on my lungs than any vape I've tried so far.

I can't wait to experience a flower hit like this.

The showerhead is easier than a bic lighter for flower. And did I mention no coughing. I'm not sure why. I'm beginning to think coughing might be associated with draw resistance.

This is what I've been searching for, for years. The equivalent of a good old fashioned bong toke sans flame and combustion.

 

[PoopMachine]

I know this is a bit OT but @NewVape710, any chance you guys could make a one piece nail with the wrap around design for DNAIL SIC dishes? Im digging the wrap around/SIC combo.

 

[Cannabis-Hardware-Ed]

I know this is a bit OT but @NewVape710, any chance you guys could make a one piece nail with the wrap around design for DNAIL SIC dishes? Im digging the wrap around/SIC combo.

You mean like this?
https://www.newvape.com/d-nail-wrap-around-centerpost-20mm-2

 

[PoopMachine]

You mean like this?
https://www.newvape.com/d-nail-wrap-around-centerpost-20mm-2

YES! Can I get it without the dropdown?

 

[Cannabis-Hardware-Ed]

YES! Can I get it without the dropdown?

The drop down is not required. The wrap-around dnail head #3081 fits all 3 bodies. currently it's only available for the 20mm coil.

 

[muunch]

I just got my showercap today and am waiting for everything to finish heating up and I can give some first impressions. I am very much looking forward to this, as the normal set-up was possibly one of the best flower vaping setups I've tried (as far as both flavor and effects)

However, there is one issue... It looks like the aluminum base I got has a hole slightly too big for the little kickstand to screw into Really sad. The concentrate stand takes up way too much of my small desk.

 

[Cannabis-Hardware-Ed]

I just got my showercap today and am waiting for everything to finish heating up and I can give some first impressions. I am very much looking forward to this, as the normal set-up was possibly one of the best flower vaping setups I've tried (as far as both flavor and effects)

However, there is one issue... It looks like the aluminum base I got has a hole slightly too big for the little kickstand to screw into Really sad. The concentrate stand takes up way too much of my small desk.

Please email sales@newvape.com and we will ship you another post.

 

[muunch]

Please email sales@newvape.com and we will ship you another post.

Done. Thank you, sir

Was a little confused as I thought maybe I had missed something lol but no biggie

showerhead RIPS man. I need to redial in my temps and smash some dabs but this will be fun

edit:

I greatly prefer the draw resistance w the showerhead. Very open. It's also fucking massive and dabs don't taste "worse" - just slightly muted but I still get the full profile of this live resin I have

 

[disGRUNTled]

Drinking a Oak-Aged Vanilla World Wide Stout from Dogfish Head @ 18 % ABV its a sipper for sure.Watching season 3 of Narcos , putting some Mr. Nice Guy thru the Flowerpot. This thing is so efficient with incredible flavor. Its tied for my fav device with the Sticky Brick Jr.

 

[EmDeemo]

I greatly prefer the draw resistance w the showerhead. Very open. It's also fucking massive and dabs don't taste "worse" - just slightly muted but I still get the full profile of this live resin I have

Yup. My findings too.

I'm just shocked at how it improves on something that I was already amazed by. The lack of cough is amazing me. The increased extraction rate is amazing. The wide open draw is fantastic.

With either packing method I use, it still kicks the loads arse. Just ENORMOUS clouds, effortlessly. Flavour has increased with just flower. I really dont think I'll be going back to the SiC dish in a hurry, but I'll be testing the 20mm SiC wraparound over the weekend.

The DHGate Vapecode 20mm coil has a slight longer lead, and feels sturdier than the Auber 16mm. I prefer the rotary dial on the Auber controller but thats really not anything important. Power lead out the back is preferable for me with the vapecode too.

Just done a double decker at 710. Way more manageable for my lungs than with the 16mm FP I've been using up till now. Carbed with the underside of a small glass jar

I'll post a video or two tomorrow.

Things are gonna get real milky

 

[muunch]

I like the showercap, I had to turn my temps down a bit actually. I was getting some charring if I left it at "regular" temps and dropped the showercap on.

I'm not gonna lie, I like using the showercap and seeing a nice milky rig, but you can definitely get effortless clouds without using it. there's really no *need* to use it with flower. it's just kinda fun, imo

Either way, it is an absolute major improvement for flower over the regular setup. it's smoother, tastier and fuller. quicker and easier as well. I had a slightly less brown ring along the outside of my bowls before - no longer. also. full toast all the way through. the bottom is as uniformly vaped as the top.

in regards to concentrates :

I also think the increased surface area of the Ti showerhead trough leads to the taste being not so bad? Idk. It's not stopping me from using the showerhead


those are my thoughts after just a few dabs. bare with me folks.

...................

To help loading: https://www.amazon.com/RSVP-Endurance-Stainless-Steel-Measuring/dp/B0006GNYM4

the pinch and dash will definitely be useful for flowers. smidgen for crumble or kief, but I'd say they're a worthwhile pickup as they can be used with a variety of devices (flipbrick,lily,dobby etc). I was just looking for something cheap because spilling crumbs while loading was driving me nuts.

also, maybe I got lucky, but my nut for the showerhead 20mm has the newvape branding on it

 

[goodpunk6]

However, there is one issue... It looks like the aluminum base I got has a hole slightly too big for the little kickstand to screw into Really sad. The concentrate stand takes up way too much of my small desk.

That sucks buddy. I recommend you get a kickstand instead.

Also @NewVape710 Please make a titanium debowler (here is a plastic one on amazon). I would love to have something that compliments the titanium look of the kickstand.

 

[muunch]

He said the stand was the most stable, so I opted for that instead hoping it'd be good. I would really like to leave my FP on 24/7 (aside from when I will be gone for longer than normal etc) and I didn't trust the kickstand but maybe I just got got and should just ask for 5 kickstands instead?

I would also like a debowler or something. I don't want the tray I'm dumping my bowls into my @Ratchett spitoon but it's not the most convenient, and also the joint is pretty much constantly stuck when hot so I need to take the adapter out also, which is also hot as shit and like doubles the length and weight lol. beeswax on joints was not a complete success

 

[goodpunk6]

I definitely feel a titanium debowler and kickstand combo is the way to go. I Already own the kickstand.

 

[Likes2vape]

I sent my handle bowl in today to get reworked. I was going to order the showercap right away but I'm going to wait until NewVape is reworks the bowl and then place an order so they can ship everything together.

I'm in love with the showerhead! It just milks so easily and no draw resistance is awesome. After using the wrap around dnail head for a couple days I'm switching back to the sh. I love not having to use a carb cap with vaping flower. I think the wrap around head will be used to dab from only.

 

[EmDeemo]

I'm in love with the showerhead! It just milks so easily and no draw resistance is awesome.

All of this.

 

[Likes2vape]

I got a j hook today and decided to try the sh through it. I actually had to carb cap through the j hook where as through the bong it milked it and I was able to finish a bowl in 1 hit. With carb capping it is gnarly through a j hook. Tried a dab through the j hook as well I won't be doing that again!

 

[ichibaneye]

I must be alone here because i do not need a handle on my FP bow

No, you're not! Apparently you've not noticed that in many of my posts I've raved about the stubby bowl many times now and how I like it without the handle.

I own two now and plan on getting a few more.

what's the worry with metal in the airpath? just a nitpick? that sounds pretty amazing though... make it happen!!

It's not a nitpick. Good glass or quarts AP's will always beat out metal in flavor and taste when it comes to flower and errl draws. That's just how the cookie crumbles.

ITS SHOWERHEAD DAY!

EDIT: This is the quickest producer of flower vapour I've ever known. And smooth as hell. Massively increased lung full, but no increase in coughing even tho I'm still at the relatively high temps I stopped at last night (a cliche ridden 710), in fact, quite the opposite. Seriously impressed, and expectations surpassed. I've only been doing flower so far, double deckers will be done later today.

I'll be back later with more thoughts.

Excellent. Will you be posting videos or photos for us?! Welcome to Showerhead heaven. It's great to hear that everything is in order for you.

I got a j hook today and decided to try the sh through it. I actually had to carb cap through the j hook where as through the bong it milked it and I was able to finish a bowl in 1 hit. With carb capping it is gnarly through a j hook. Tried a dab through the j hook as well I won't be doing that again!

Why no more dabs on the J-HOOK? Do tell!

Good morning everyone out there in Flowerpot land!

 

[Chicken #420]

You guys are KILLING me here!!!!

My ShowerHead won't be here until after the holiday... USPS, bless their incompetent asses, claims Tuesday delivery at this point, instead of the Saturday (today) delivery initially promised.

First-world problems.

 

[EmDeemo]

Stayed up late, testing. Slept in late, sleeping off the testing.

No videos from me today

Full flowerbowl at 580 with the Showerhead.

Just beautiful.

 

[ichibaneye]

You guys are KILLING me here!!!!

My ShowerHead won't be here until after the holiday... USPS, bless their incompetent asses, claims Tuesday delivery at this point, instead of the Saturday (today) delivery initially promised.

First-world problems.

I feel your pain. I waited and watched the Showerhead come to bloom and then waited some more.

All the FP's are great, they all shine in their respective categories that's for sure.

If you're all about the best flower experince the Showerhead blows the other models out of the water! No problem, hands down. Small of large, dense or loosely packed bowls, it crushes homeruns every time.

Get ready for a wide range of usable temperatures with the Showerhead too. You're going to love it!

Stayed up late, testing. Slept in late, sleeping off the testing.

No videos from me today

Full flowerbowl at 580 with the Showerhead.

Just beautiful.

Understandable, I've only been at it a week and I have had to pace myself. That and the Flowerpot has also put the nap-down on me a few times unexpectedly.

I've learned that petty much right away that the Flowerpot deserves to be treated with respect. If not it'll easily lay a heavy hand on ya if you're not careful.

 

[PoopMachine]

Going to get a showehead soon... maybe next month.

Next up is a coil wrapped Dnail SIC head with base in the non FP variety.