disGRUNTled
Well-Known Member
Jet Fuel live resin , drinking a Wooden Robot Brewery Generously Hopped V 2 IPA.Watching WWE Great Balls Of Fire.
![lcF8WXn.jpg](/proxy.php?image=http%3A%2F%2Fi.imgur.com%2FlcF8WXn.jpg&hash=e3ffe8c5e652df3d2cddfffb72c5af2a)
![GmYlcvq.jpg](/proxy.php?image=http%3A%2F%2Fi.imgur.com%2FGmYlcvq.jpg&hash=71fe78a2244d73dc1567bdd65353af65)
![YBZioG5.jpg](/proxy.php?image=http%3A%2F%2Fi.imgur.com%2FYBZioG5.jpg&hash=702c92216006487566d923e221178bac)
Why use the newVape FlowerPot?
- For Flower the Flowerpot = Bong Rip Without Combustion for Amazing Flavor
- For Dabs the Flowerpot = Hits like any other Enail with a similar dish and coil size
- For Dabs & Flower @ the Same Time the Flowerpot = "Get Twaxed" a new level of highness
- No Flame
- Fun to Own by utilizing the industry standard 14 or 18mm glass joints the Flowerpot allows endless possibilities within the world of blown glass.
- One setup on your bench for vaping and dabing
too medicatedand don't really want to read or write right now but i would like to thank newvape and edwyin pyron. wow this thing hits so hard with the lolicap, i thought it was combusting and man it taste soooo good. love the unbiased honest opinions on vapes in this forum, especially info i received from visiblvaped and jusspassedu...still tinkering with the temps(700 and up better for me)...loved the evo thought i had the best thing but this forum kept catching my attention. any evo users on the fence and I'm not bashing the evo but this beats it easily in Flavor, Potency and Efficiency.
I notice some like and some don't like using the LolliCap.
For me it is an absolute necessary tool for the FP.
I set my controller at 696F and using the EQ basket that is 1/3rd full, i cap from the start.
Timing of your inhale is important because you can do this in one inhale, a very full set of lungs!
I can also do this sans LolliCap at much higher temps but found the taste was not nearly as good.
At this temp i can also do small dabs and flower together for amazing vapor!
My favorite so far is to dab 96% flavorless distillate with some high THC Watermelon!
Flavor is intense, effects are immediate and a good, restful sleep is ensured!
I am really happy with my FP!
PS - thank you whoever invented spell check!
I notice some like and some don't like using the LolliCap.
For me it is an absolute necessary tool for the FP.
I set my controller at 696F and using the EQ basket that is 1/3rd full, i cap from the start.
Timing of your inhale is important because you can do this in one inhale, a very full set of lungs!
I can also do this sans LolliCap at much higher temps but found the taste was not nearly as good.
At this temp i can also do small dabs and flower together for amazing vapor!
My favorite so far is to dab 96% flavorless distillate with some high THC Watermelon!
Flavor is intense, effects are immediate and a good, restful sleep is ensured!
I am really happy with my FP!
PS - thank you whoever invented spell check!
Not sure what enail you have but most with a 5 pin layout will require these specs : The 5 pin connection needs to be wired to the 'D-Nail Standard' (Pins 1 & 2 = AC Power, Pin 3 = TC +, Pin 4 = TC -, Pin 5 = Ground). , those are the specs of my 16mm and 20mm coil , both worked with my Chinese enail and hex nail setup .I'm so ready I just can't figure out these coils as I have the 5 pin but dhgate says there are separate layouts for same one..don't wanna buy both just to see..
Kindda regret to have jumped on the chinese Enail train, as Auber/Dnail/whatever should be better quality..
Is there any benefit to choosing one controller over the other?
This coil only works with NewVape Digital Enail Controllers. There are many different connectors, and pin configurations used throughout the industry.
That is why it is always best to invest in something that would make it easy to get any warranty work done. Sorry you have to go through this. I personally never had a problem like that. I started with a China Enail though and while i did not have any problems if i had to do it over again i'd take my own advice. Hope you get it sorted quickly. Oh wait i did do it over again and went with a Hex-Nail , probably overkill but its cool.It seems that my coil/controler that I bought on Ebay from Germany (chinese company..) is buggy
First, it had made my main electricity breaker to go down
Then all was miraculously going pretty good, honey moon with FlowerPot !
Yesterday, the controler went crazy, jumping temperatures, sometimes dont seeing the coil..
I think a wire broke on the coil/cable junction
Did that already happened to anybody of you??
FlowerPot is now down, until I receive a new coil (07/24 - 08/23.. )
Kindda regret to have jumped on the chinese Enail train, as Auber/Dnail/whatever should be better quality..
No packages are labeled with the name Custom instruments so no worries.Does NV send packages labeled discreetly or is the NewVape label on the sender info?
What he is doing now looks too much like trying to lock people in to buying his coils and controller.
It seems that my coil/controler I bought on Ebay from Germany (chinese company..) is buggy
First, it had made my main electricity breaker to go down
Then all was miraculously going pretty good, honey moon with FlowerPot !
Yesterday, the controler went crazy, jumping temperatures, sometimes dont seeing the coil..
I think a wire broke on the coil/cable junction
Did that already happened to anybody of you??
FlowerPot is now down, until I receive a new coil (07/24 - 08/23.. )
Kindda regret to have jumped on the chinese Enail train, as Auber/Dnail/whatever should be better quality..
I don't think NewVape is trying to lock people in to buying there controller and Nail. More so like you said its more of a machine shop rather than a electronics firm. They make there money mostly on what they design and machine. I think he is just trying to give the option for people to grab a Enail all at once and make it easy since they offer nails and goods they machine that will work with it. Plus i also think the price on the Enails being offered is more than fair. I am sure if we asked the pin layout it would be provided. Please take no offense , just my thoughts . I think you meant the Auber 300 & i also think that is a great Enail.I went the cheap Chinese controller route at first also. Greenlight G9 from DHGate. It was an utter POS. I mean, it wasn't BUILT right from the start. It has the correct Omron PID controller but had NO external solid state relay....none, and this model of Omron is specifically built for that and one reason I bought the unit.
The Omron wasn't wired correctly (I mean, wrong wire to wrong pins) and I can't hardly understand how it worked at all (it did work, just with huge temp excursions). The Omron PID has screw terminals...these idiots soldered the wire to the freaking screws.
A good friend of mine and a champ of a human being, @mutten840 , helped me out and rebuilt it correctly for me. I have it as a stand by and I bought an Auger 300.
I REALLY like New Vape and Edwyn....but he owns a machine shop, not an electronics design firm. Auber, on the other hand, is an industrial instrument company located in Georgia. I liked that they were a true commercial instrument company and I liked that I could call them for engineering support on the unit.
But probably the biggest for me was this from New Vape site:
This is one area where I disagree with Edwyn's approach. Specifically, he should just publish the pin outs of his controller/coils and let people decide. What he is doing now looks too much like trying to lock people in to buying his coils and controller. Chances are good that its the industry standard pin out of 1 & 2 = AC power, 3 & 4 = thermocouple +/-, 5 = ground. This is used by D-nail and just about every Hot Runner Chines coil out there. But he isn't saying that....he isn't saying what his pin-outs actually are.
Auber, on the other hand, publish actual tech data like an actual tech company including the pin outs of their controller/coils and they do indeed match the defacto standard I showed above.
Just my view, I'm sure you will be fine either way.
HI - I did indeed mean the Auber...why, did I misspell it somewhere.I don't think NewVape is trying to lock people in to buying there controller and Nail. More so like you said its more of a machine shop rather than a electronics firm. They make there money mostly on what they design and machine. I think he is just trying to give the option for people to grab a Enail all at once and make it easy since they offer nails and goods they machine that will work with it. Plus i also think the price on the Enails being offered is more than fair. I am sure if we asked the pin layout it would be provided. Please take no offense , just my thoughts . I think you meant the Auber 300 & i also think that is a great Enail.