Discontinued VapeXhale Cloud EVO

Maitri

Maitri

Deadhead, Low-Temp Dabber, Mahayana Buddhist
Cannabis Connoisseur said:
To clean the Vapexnails people turn the unit to max and let it self clean. Also good ISO soaks
Click to expand...

My EVO nails get quite dirty. Maxing the EVO's temperature cleans the bottom well but does little to clean the rest of the nail. ISO gets most of the rest. The only thing I have found to get my nails pristine clean is three minutes in the microwave in some Smoke Soap. That stuff is amazing.
 
Maitri,
  • Like
Reactions: ataxian
ataxian

ataxian

PALE BLUE DOT
BL4zD said:
I don't even know how you'd disagree with what I feel is good value for my money, but whatever, which part of my assessment are you disagreeing with?

I said the quality of the vapor was not the issue and you listed a bunch of examples of how good your vapor tastes :/

I don't feel the quality of the pieces are on par with other expensive pieces I've purchased over the decades. Your post didn't speak to the quality of the glass itself but wait until a quartz nail breaks in your hand while you're gently washing it with soapy water before you conclude one way or the other.
Click to expand...
Sorry I was just waking up.

Your the best always been the best and always will be the best.

Sorry I thought you were from CALIFORNIA?:peace::love:
 
smartbass

smartbass

Active Member
CarolKing said:
Vapexhale is having a sale and with @stickstones coupon code it's still expensive but not much difference than what you will be paying through Vapornations, they may pay for shipping, I don't know. You have to pay for shipping too at Vapexhale no bargains for me far as shipping when I ordered.

All the accessories I want cost about $100 through Vapexhale. I really like my Hydrobomb.
Click to expand...
I have a question mrs Carol when i first turn on my evo it stays red for about 2 and a half minutes then turns green for about 15 seconds then back to red for another minute then it stays green does yours do that? Only when it's cold.I appreciate the answers you helped me before i bought it
 
smartbass,
covercash

covercash

Cloud EVO + MFLBPA
smartbass said:
I have a question mrs Carol when i first turn on my evo it stays red for about 2 and a half minutes then turns green for about 15 seconds then back to red for another minute then it stays green does yours do that? Only when it's cold.I appreciate the answers you helped me before i bought it
Click to expand...
Mine does a similar red & green dance before staying green. I wouldn't worry.
 
covercash,
  • Like
Reactions: ataxian
twosilvertrees

twosilvertrees

lose the planetary mindset
@smartbass Might have something to do with the temperature being very close to the red/green threshold? Not sure if that makes sense, but let's say you're heating it to 350 and it's heated up to like 347-348 and is just hovering there before heating completely?

Basically I have no idea, but that would be my best guess! :D
 
twosilvertrees,
  • Like
Reactions: Smelly Dog
Likes2vape

Likes2vape

Well-Known Member
smartbass said:
I know it works not to worried about that part i just wondering why the light did that
Click to expand...
Mine does it too. On heat up it over shoots the temp by just a notch. When you see it go from green to red turn up the temp just slightly and you will see it turns green and stays there.
 
covercash

covercash

Cloud EVO + MFLBPA
Likes2vape said:
Mine does it too. On heat up it over shoots the temp by just a notch. When you see it go from green to red turn up the temp just slightly and you will see it turns green and stays there.
Click to expand...
How do you know it overshoots the temp? My IR laser thermometer gun should be here soon so I can verify temps at the various dial positions :)
 
covercash,
  • Like
Reactions: Maitri
ataxian

ataxian

PALE BLUE DOT
BL4zD said:
That post was meant to clarify not be abrasive. Sorry it came across as rude. I'm going to blame lack of sleep and being a crotchety old man in general :)
Click to expand...
It's all good!

I'm a goof-off so please ignore my weird post.

The EVO has been added to my rotation.

Low
medium
high

This is how I mix up my vaporizers.
It's not the brand name it's the "function"!

No hard feelings!
 
Likes2vape

Likes2vape

Well-Known Member
covercash said:
How do you know it overshoots the temp? My IR laser thermometer gun should be here soon so I can verify temps at the various dial positions :)
Click to expand...
Just makes sense to me!

I turn it on see it turn green and few seconds later it turns red than goes back to green after 30 seconds or so of doing the red/green dance.

If I turn the temp up just barley when it goes from red to green the first time it turns from red to green and stays green.
 
Likes2vape,
BoinG

BoinG

Well-Known Member
@smartbass i already answered that question ;D

BoinG said:
no problem with this behavior, what actually happens is

-you turn the unit on (green) it is checking the temperature
-result unit is too cold for the set temperature (goes red) and starts to heat up
-goes green as it reaches your set temperature and shuts off the heater
-there will be some excess heat in the heating element which causes the unit to overshoot the set temperature (goes red again)
-it will take a minute for the unit to dissipate the excess heat than it will go green again.
Click to expand...
 
Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
kg6xuUu.jpg
 
V

vctr

Well-Known Member
I just received a cheap Chinese HT. The quality is nowhere near the quality of the originals. The glass is not as good nor thick and the workmanship is far from the Turbine HT I have. There's even bubbles in the body of the piece, but the welds are decent and the perc is straight enough. The HT also makes tiny whistle. I didn't expect the same quality either. I got this (and one other that is still on it's way) to use when I'm inebriated, have friends over or when I want to take the vape with me. It will not brake my heart to smash 25€ piece of glass the way 200€ piece would.
 
covercash

covercash

Cloud EVO + MFLBPA
vctr said:
I just received a cheap Chinese HT. The quality is nowhere near the quality of the originals. The glass is not as good nor thick and the workmanship is far from the Turbine HT I have. There's even bubbles in the body of the piece, but the welds are decent and the perc is straight enough. The HT also makes tiny whistle. I didn't expect the same quality either. I got this (and one other that is still on it's way) to use when I'm inebriated, have friends over or when I want to take the vape with me. It will not brake my heart to smash 25€ piece of glass the way 200€ piece would.
Click to expand...
Can you post links to the pieces you ordered?
 
covercash,
V

vctr

Well-Known Member
covercash said:
Can you post links to the pieces you ordered?
Click to expand...

Uhm, I'm not sure it's allowed... but one was called "26cm tall glass mouthpiece with showhead percolator smoking bongs mouthpiece water bong mouthpiece based joint size 18.8mm MOD-Mouthpiece" and the other "VapeXhale hydratube HydraTubes 9.5 Inches bubbler glass bong 5mm thickness" if that helps ;)


Oh, BTW, I thought about why I liked using the dry mouthpiece and realized that a part of it was that the vape weighs nothing with just the dry mp.
 
vctr,
covercash

covercash

Cloud EVO + MFLBPA
vctr said:
Uhm, I'm not sure it's allowed... but one was called "26cm tall glass mouthpiece with showhead percolator smoking bongs mouthpiece water bong mouthpiece based joint size 18.8mm MOD-Mouthpiece" and the other "VapeXhale hydratube HydraTubes 9.5 Inches bubbler glass bong 5mm thickness" if that helps ;)


Oh, BTW, I thought about why I liked using the dry mouthpiece and realized that a part of it was that the vape weighs nothing with just the dry mp.
Click to expand...
Is your review of the 26cm or the 9.5in?
 
covercash,
Kevea

Kevea

Well-Known Member
covercash said:
When the 9.5" comes in, definitely post your thoughts on it - I've had my eye on it as my "backup" in case my good one has an accident!
Click to expand...

I was one of the first to order this design and overall I'm happy with the quality. It seems to be a solid piece with some thicker than usual China glass. The recycle function doesn't work well at all due to it needing to be filled as high as possible to create a vortex and then it's very chuggy but, I'm not too worried about it. I usually fill it about a half inch above the perc and she purrs nicely. For $35 it's a great value however, it definitely needs a hydrafoot to be supplied as well.
 
You must log in or register to reply here.
Top Bottom